Database Info

[Q] Cf-Auto-Root LOOP STUCK! PLEASE HELP!!!!

Hi guys, i'm new to this forum and I came here for some answers and needed help please! So I managed to get my phone into Odin download mode ( Hold power + home + vol Down). I have a S2 SGH-I757M Phone. I Inserted my usb cable into my my pc connecting my phone to Odin. I added the Cf-auto-root into the pda section and I got this log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-sghi757m-sghi757m-sghi757m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)[/SIZE]
Now My phone reboots and its stuck with the red pirate andriod and at the bottom is says Cf-auto-Root, and under that it says the developers name and such and that is it.
Any help would be highly appreciated. I'm downloading the stock rom (100MB/632MB) to get my phone working again as i need it for tomorrow very urgently. Please how can I fix this problem??

try to flash ROM from Sammobile

Sourman97 said:
Hi guys, i'm new to this forum and I came here for some answers and needed help please! So I managed to get my phone into Odin download mode ( Hold power + home + vol Down). I have a S2 SGH-I757M Phone. I Inserted my usb cable into my my pc connecting my phone to Odin. I added the Cf-auto-root into the pda section and I got this log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-sghi757m-sghi757m-sghi757m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)[/SIZE]
Now My phone reboots and its stuck with the red pirate andriod and at the bottom is says Cf-auto-Root, and under that it says the developers name and such and that is it.
Any help would be highly appreciated. I'm downloading the stock rom (100MB/632MB) to get my phone working again as i need it for tomorrow very urgently. Please how can I fix this problem??
Click to expand...
Click to collapse
Try to Download And Install the same root package again and flash it via odin!!
If your Device is Still Stuck Re-Flash Stock Rom

pushkardua said:
Try to Download And Install the same root package again and flash it via odin!!
If your Device is Still Stuck Re-Flash Stock Rom
Click to expand...
Click to collapse
I got it working, Thanks. However my AWS band got removed from my phone or something because I am unable to use wind/mobilicity.
/closethread

Sourman97 said:
I got it working, Thanks. However my AWS band got removed from my phone or something because I am unable to use wind/mobilicity.
/closethread
Click to expand...
Click to collapse
hi im in the same boat can you plz let me know how you did this fix?
iev try'd redoing an try'd finding stock rom but cant and now im stuck plz help!!!

Can not flash official firmware

Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...

r'n'b said:
Hello,
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3.
I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Why can't I flash to this firmware?
Help...
Click to expand...
Click to collapse
Did you turn on USB DEBUGGING?

Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992

k2evil said:
Hello again
I had the same problem with flashing rom with odin... I found a solution and explained it how to fix mine...
I hope it be helpful
http://forum.xda-developers.com/galaxy-s6/help/help-odin-stuck-start-write-nand-t3127992
Click to expand...
Click to collapse
Ok... I Solved my problem finally... I spent almost 3 days in forums to find a solution... So i give you guys a summary what I do:
1) Find my phone's pit file according to model and storage capacity (Mine is G920F 32GB)
2)Then the trick is use ODIN V3.10.6 insist of V3.09... http://forum.xda-developers.com/showthread.php?t=2711451
3)If you face with hidden.img problem, extract the rom's file and rename the file hidden.img to hidden.img.tar and flash it by ODIN (Put this file on AP)...
Wait for some minutes and there is where magic happens
Click to expand...
Click to collapse
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.

r'n'b said:
I don't understand your solution.
What do I need to do with the pit file?
My device is also G920F 32GB.
The USB DEBUGGING is on.
Click to expand...
Click to collapse
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step

k2evil said:
I heard from someone that Stucking in Start Write NAND is because of pit file...
but forget about it.. try without pit file. download the lastest odin v 3.10
usually process fails when it try to flash hidden.img... if it happen for you, do the 3th step
Click to expand...
Click to collapse
Finally I managed to flush the ROM
Odin3_v3.10.6 did the job.
Thanks!

Your welcome buddy... just don't forget to hit the thank button

An error has occurred while updating the device software. G900F

Hello, I have serious problem can't flash any rom via odin 3.10.7 I tried yesterday and flash G920FXXU3COI9_G920FOXX3COI6_XEO
Today I tried install BTU and odin giving me sth like that. Cant update any new oryginal rom... Softbricked
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can't update vie SmartShare - device unknown.
Please help!

First a question since I am not very familiar with models, is the device G900F or G 920F, because fw is for 920 and title says 900.
Put phone in download mode:
Vol down+Home+Power button
then Vol Up to confirm Download mode after entrering dl mode.
In Smart Switch go to more, and choose Initialization from drop down menu, type model e.g. SM-G900F, s/n from back of the phone, and wait till it finishes download and flashing.
Then try flash TWRP and rom through Odin.
Hope that helps.

Odin firmware flashing always fails

I have a Galaxy note 10.1 running kitkat 4.4.2 (GT-N8000)
Yesterday i was browsing the internet when suddenly the device decided to shut down and went on a restart boot loop where it would show the "Samsung galaxy note 10.1" screen for a while and then reboot and re-show the same screen
i have tried entering recovery mode but the tablet keeps restarting without end the only thing i can access is download mode
So recently i tried flashing using Odin but when ever i try to flash any file it shows this error
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing a stock recovery so i can try and wipe the current data
I have tried to download multiple stock roms from jelly bean to kitkat which all ended up failing
I have tried flashing the tablet with a "Repair rom" which contains the BL AP CSC and Modem files
i think that if i can still access the download mode that there is some hope to recover?
Any solutions?
Thanks in advance.
If i posted this in the wrong section forgive me i have just started out

N8010 stuck in boot loop displaying Samsung GALAXY Note 10.1

Hello,
My tablet was working fine, but the other day when I turned it on this happens. I can at least turn it off when connected to the charger.
It will not boot into recovery. I just get the android on his back with red triangle and No Command.
I can boot into Odin download. So I am trying to install CF-Auto-Root as a precursor to installing CWM Recovery to see if I can boot into that recovery. I have downloaded and installed Odin, and downloaded N8010 version of CF-Auto-Root (CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010).
Using Odin to install this .tar file seems to work (I get Pass), but auto reboot, or manual reboot into recovery is still the same. Isn't booting into CF-Auto-Root. This is the Odin log;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Is it supposed to look like this?
Any ideas what I may be doing wrong, or anything I can try?
Thank you.

niloc32 said:
Hello,
My tablet was working fine, but the other day when I turned it on this happens. I can at least turn it off when connected to the charger.
It will not boot into recovery. I just get the android on his back with red triangle and No Command.
I can boot into Odin download. So I am trying to install CF-Auto-Root as a precursor to installing CWM Recovery to see if I can boot into that recovery. I have downloaded and installed Odin, and downloaded N8010 version of CF-Auto-Root (CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010).
Using Odin to install this .tar file seems to work (I get Pass), but auto reboot, or manual reboot into recovery is still the same. Isn't booting into CF-Auto-Root. This is the Odin log;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-p4notewifiww-p4notewifixx-gtn8010.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Is it supposed to look like this?
Any ideas what I may be doing wrong, or anything I can try?
Thank you.
Click to expand...
Click to collapse
i have same problem with an italian gt-n8010 -.... finally you find fix ???

That post was four years ago , poster not seen since .
Usual is search answers well posted , depends upon exact error message .