I rooted my mobile and deleted some google apps , after 2 days my mobile stucked on booting , it shows only micromax logo.
So i tried to go to recovery mode by pressing volume and power button but nothing is happening , it is not opening.... so can anyone help how to recover my phone ?
Monte2312 said:
I rooted my mobile and deleted some google apps , after 2 days my mobile stucked on booting , it shows only micromax logo.
So i tried to go to recovery mode by pressing volume and power button but nothing is happening , it is not opening.... so can anyone help how to recover my phone ?
Click to expand...
Click to collapse
try flashing it with stock rom or frimware
i have tried but its not working , it show device didn't detected
Try installing vcom preloder drivers in computer nd then try flashing
Monte2312 said:
i have tried but its not working , it show device didn't detected
Click to expand...
Click to collapse
Windows?
If yes, make sure drivers are correctly installed,
Its also a bit more tweaky for windows 10
How to install drivers in windows 8?
Monte2312 said:
I rooted my mobile and deleted some google apps , after 2 days my mobile stucked on booting , it shows only micromax logo.
So i tried to go to recovery mode by pressing volume and power button but nothing is happening , it is not opening.... so can anyone help how to recover my phone ?
Click to expand...
Click to collapse
You can download stock rom for your device model and then flash it using SP Flash Tool.
Do not forget to install drivers for your device. Hope it will work for you
Related
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked
n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.
Can you come in recovery?
Press Power On + Home Button at once
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!
djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.
may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!
vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:
Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.
Hello guys..
Karbonn A12+ is newly launched Android phone with 1.3GHz processor and 512MB RAM...Still we didn't have Stock ROM for this model...
Now i proudly present Stock jellybean ROM for Karbonn A12+..
I prepared it to flash via SP Flash Tool..
Now don't worry to experiment with your Mobile do experiment and you can recover your karbonn A12+...
So keep learning and Do some intresting experiment and make some custom ROM...
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
now here are is method to flash.
(Try At Your OWN RISK...)
you Need.
1.An PC (Ofcorse you need and PC or laptop)
2. Karbonn A12+ Stock jellybean ROM (Download)
3. SP_Flash_Tool v3.1312.0.139 (other Version may not work proper)(NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...[/COLOR][/B]
Download Links:-
[url]http://a2zandroidrom.blogspot.in/2014/09/karbonn-a12-stock-jellybean-rom.html
Drivers are added...
links are
http://a2zandroidrom.blogspot.in/2014/09/karbonn-a12-stock-jellybean-rom.html
Download file is password protected..password is given in download link page...Download is available in small parts as well as in single part also...
post your review please !!
Good work Bro . . .
suthar88.sunil said:
Good work Bro . . .
Click to expand...
Click to collapse
Thanks
Phone not connecting
greatpapa said:
Hello guys..
Karbonn A12+ is newly launched Android phone with 1.3GHz processor and 512MB RAM...Still we didn't have Stock ROM for this model...
Now i proudly present Stock jellybean ROM for Karbonn A12+..
I prepared it to flash via SP Flash Tool..
Now don't worry to experiment with your Mobile do experiment and you can recover your karbonn A12+...
So keep learning and Do some intresting experiment and make some custom ROM...
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
now here are is method to flash.
(Try At Your OWN RISK...)
you Need.
1.An PC (Ofcorse you need and PC or laptop)
2. Karbonn A12+ Stock jellybean ROM
3. SP_Flash_Tool v3.1312.0.139 (other Version may not work proper)
Method
1. Download all files on your PC and extract them on one place.
2. now you will have two folder name by "!Files_to_FlashTool" and "SP_Flash_Tool_v3.1312.0.139"
3. Now RUN SP flash Tool.
4. now click on "scatter-loading" tab.
5. now Select "scatter file"....Sp tool will list up all the component to flash.
6.now hit the Download button on SP...you will see an warning something like user data and cache are not loaded or something...just ignore it...and click on "Yes".and now you are ready to flash.
7. Now switchoff your phone (If it is on) and pull out the battery.
8. Connect your phone while battery is out.
9.After connecting your Phone insert your battery...
10. Sp Tool will recognise your Phone and flashing will start.
11. Green circle will show that flash is Done...
Enjoy
NOTE:- Flashing Process and these type of development process may cause any unwanted and unknown errors...So please Try it at your OWN RISK...I will not Responsible for any damge...
Download file is password protected..password is given in download link page...Download is available in small parts as well as in single part also...
post your review please !!
Click to expand...
Click to collapse
My phone is not connecting. i tried many times. help me out plzzz..
Combination
vikphogat said:
My phone is not connecting. i tried many times. help me out plzzz..
Click to expand...
Click to collapse
First of all your have to install VCOM USB drivers for MTK6572 devices....
And then after hitting download button connect your phone while pressing both volume down + up button together....or try this type of different combination....
yes this is most difficult part..i tried 20 times myself....
if not working then try on different machine
As you will be connected there will be an Red and yellow line on SP tool
Next to try..
after hitting download button Press power and volume up button and then connect USB cable while pressing those key together....
Even you can try this new flash tool
http://www.mediafire.com/download/tnas2hjqruf2iht/SP_Flash_Tool_v5.1343.01_by_indiantitaniclover.zip
thanks dude..!!
greatpapa said:
First of all your have to install VCOM USB drivers for MTK6572 devices....
And then after hitting download button connect your phone while pressing both volume down + up button together....or try this type of different combination....
yes this is most difficult part..i tried 20 times myself....
if not working then try on different machine
As you will be connected there will be an Red and yellow line on SP tool
Next to try..
after hitting download button Press power and volume up button and then connect USB cable while pressing those key together....
Even you can try this new flash tool
Click to expand...
Click to collapse
i will try it surely.. can u please also provide me the link to vcom usb drivers for karbonn a12+ ?
thanks in advance.. :laugh::good:
Dri
vikphogat said:
i will try it surely.. can u please also provide me the link to vcom usb drivers for karbonn a12+ ?
thanks in advance.. :laugh::good:
Click to expand...
Click to collapse
New flashtool will recognise direct....Hope so...download new flash tool and try...
greatpapa said:
New flashtool will recognise direct....Hope so...download new flash tool and try...
Click to expand...
Click to collapse
i have tried it nearly 15 16 times. but when i put battery presing and holding volume up + down button phone goes to factory mode. 8 options written in chinese are showing up.
Powrer
vikphogat said:
i have tried it nearly 15 16 times. but when i put battery presing and holding volume up + down button phone goes to factory mode. 8 options written in chinese are showing up.
Click to expand...
Click to collapse
First click on download in flashtool...then press
power + volume up and connect while pressing...Working for me..tested by myself...
hard bricker karbonn a12+........
Great work and nice tutorial some how unbricked my phone 100% working
\\beginers dont post any spam without reading the complete tutorial as I did
thanks a lot for helping
not working
greatpapa said:
First click on download in flashtool...then press
power + volume up and connect while pressing...Working for me..tested by myself...
Click to expand...
Click to collapse
plz help it's not working.installed usb driver & latest sp flash tool.still not working ????
Fastboot
Lovesahota said:
plz help it's not working.installed usb driver & latest sp flash tool.still not working ????
Click to expand...
Click to collapse
Hello....
Try this one..
Switch off your mobile...
Now press volume up + Power button...
Then you will see three option something like Recovery, fastboot, factory...
You have to choose fastboot option...
when fastboot is selected then connect your phone to PC via USB cable...this will install some helpful drivers to your PC....and then again try the flash method without battery...
Stuck at the EYE boot screen of Karbonn A12+. Any help please? Yes, I followed the instructions carefully.
http://playrangers.com/KarbonnA12plus/
in that page the usb drivers of 6577 is provided. Kindly provice MT6572 VCOM drivers.
Process DOne ?
nightcrawler218 said:
Stuck at the EYE boot screen of Karbonn A12+. Any help please? Yes, I followed the instructions carefully.
http://playrangers.com/KarbonnA12plus/
in that page the usb drivers of 6577 is provided. Kindly provice MT6572 VCOM drivers.
Click to expand...
Click to collapse
Did you flashed in proper way ?
means your Sptool recognise your mobile and did you see red and yellow line in sptool and was process done or not ?
greatpapa said:
Did you flashed in proper way ?
means your Sptool recognise your mobile and did you see red and yellow line in sptool and was process done or not ?
Click to expand...
Click to collapse
yeah, everything was according to the tutorial. phone was detected, first red, then blue then yellow progress bar & finally green circle. I removed the usb & reinserted the battery after flashing then pressed the power button. Karbonn animation shown & stuck at the eye screen. After a number of failed attempts I decied to erase the whole device & then flash again. I erased flash+bootloader. The phone is dead now. not powering up. But if I connect the phone via usb to pc a beep sound is heard. Any clue, how to restore the bootloader?
How
nightcrawler218 said:
yeah, everything was according to the tutorial. phone was detected, first red, then blue then yellow progress bar & finally green circle. I removed the usb & reinserted the battery after flashing then pressed the power button. Karbonn animation shown & stuck at the eye screen. After a number of failed attempts I decied to erase the whole device & then flash again. I erased flash+bootloader. The phone is dead now. not powering up. But if I connect the phone via usb to pc a beep sound is heard. Any clue, how to restore the bootloader?
Click to expand...
Click to collapse
How did you erase the Bootloader....??
if you have deleted your bootloader then it would be diffecult to revive the phone
greatpapa said:
How did you erase the Bootloader....??
if you have deleted your bootloader then it would be diffecult to revive the phone
Click to expand...
Click to collapse
I Used SP flash tool to format the device. There was an option for erasing everything (Flash + bootloader).
Will the service center accept my case.?
Ummm
nightcrawler218 said:
I Used SP flash tool to format the device. There was an option for erasing everything (Flash + bootloader).
Will the service center accept my case.?
Click to expand...
Click to collapse
Try again whole method...if you are hearing an beep sound....
Does your mobile is going in recovery mode or fastboot mode ?
Power + volume up (battery is inserted)
greatpapa said:
Try again whole method...if you are hearing an beep sound....
Does your mobile is going in recovery mode or fastboot mode ?
Power + volume up (battery is inserted)
Click to expand...
Click to collapse
Thanks a million times man for your suggestion.
I tried with fastboot but no device shown. I went to device manager & uninstalled-then reinstalled the drivers. That actually helped me to build the serial communication between SP flash tool & Device.
Then I discarded the battery & retried the SP flash tool, this time the phone is finally detected & flashed successfully. red, blue, yellow bar then green circle. DONE.
Now, the same issue. Karbonn boot animation is displayed & stuck at the eye screen. I have covered the halfway but cant be able to get success in the other half (cant see the homescreen or anything.)
---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------
Phone is OK now but it says INVALID IMEI... any suggestions please...
Good
nightcrawler218 said:
Thanks a million times man for your suggestion.
I tried with fastboot but no device shown. I went to device manager & uninstalled-then reinstalled the drivers. That actually helped me to build the serial communication between SP flash tool & Device.
Then I discarded the battery & retried the SP flash tool, this time the phone is finally detected & flashed successfully. red, blue, yellow bar then green circle. DONE.
Now, the same issue. Karbonn boot animation is displayed & stuck at the eye screen. I have covered the halfway but cant be able to get success in the other half (cant see the homescreen or anything.)
---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------
Phone is OK now but it says INVALID IMEI... any suggestions please...
Click to expand...
Click to collapse
Don't worry....
Now your phone will be fine....As i will get time i will give you tutorial to write your IMEI number....Till then you can search and google it....your phone is ok...will recover it soon....
Installed CyanogenMod 11(port) for Nokia X
from http://forum.xda-developers.com/nokia-x/development/rom-cyanogenmod-11-m8-4-4-4-t2838336
Previously my phone used to get detected by my pc using data cable using nokia_x_usb_driver.zip
Now Its not getting detected on pc after installing CyanogenMod 11 ...
it showing as nokia RM 980 on device manager on my windows 7 pc... it shows a yellow ! mark.. no driver files getting match for this...
is there any way out????
tried lots of google research on this . no luck.... installed rom manager cwm app on my mobile... tried several times...it boots into nokia default nokia recovery mode only... not into cum recovery mode..
I need to flash my phone again using clockworkmod (CWM) with another custom rom..
is there any way so that i can get in to cwm recovery mode without using pc/usb cable??? my phone is a rooted nokia x
please hep me...:crying:
ajintraju said:
Installed CyanogenMod 11(port) for Nokia X
from http://forum.xda-developers.com/nokia-x/development/rom-cyanogenmod-11-m8-4-4-4-t2838336
Previously my phone used to get detected by my pc using data cable using nokia_x_usb_driver.zip
Now Its not getting detected on pc after installing CyanogenMod 11 ...
it showing as nokia RM 980 on device manager on my windows 7 pc... it shows a yellow ! mark.. no driver files getting match for this...
is there any way out????
tried lots of google research on this . no luck.... installed rom manager cwm app on my mobile... tried several times...it boots into nokia default nokia recovery mode only... not into cum recovery mode..
I need to flash my phone again using clockworkmod (CWM) with another custom rom..
is there any way so that i can get in to cwm recovery mode without using pc/usb cable??? my phone is a rooted nokia x
please hep me...:crying:
Click to expand...
Click to collapse
As far as I'm aware, u need to hold (Power Up + Power) to boot into recovery on ur device
facing problem while removing cm11 from nokia x
bro i hv also installed cm11 on my nokia x and ... want to get rid of and m tried my level best to remove it but i failed ...
so please suggest me something so that i can get back to my metroui ....
I got my opo a week back.I rooted it and installed twrp custom recovery.I was trying to install a new boot logo via adb which bricked my phone.I used chillstep1998 software to flash the boot logo.Now there is no display,no fastboot,no recovery and no adb.i tries searching and found this http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 ,but my opo is not recognized as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008.I tried connecting to several pcs but nothing changed.i connect the phone to my laptop but nothing happens either in computer or in device manager.
PLEASE HELP and thanks for helping
Try holding POWER + VOLUME UP for about 30 Secs (it will vibrate). Mine was recognized after that (had the same problem)
radopi said:
Try holding POWER + VOLUME UP for about 30 Secs (it will vibrate). Mine was recognized after that (had the same problem)
Click to expand...
Click to collapse
Thanks bro. Windows detected the phone but color.zip file link is not working. Please post any mirrors or alternative link for the file. Thanks again
There is a tool which flashes CM11s instead of Color OS here.
radopi said:
There is a tool which flashes CM11s instead of Color OS here.
Click to expand...
Click to collapse
Thanks bro. Everything done. My phone is alive again as good as new. Thanks again
At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .
ranjand said:
At first,i want to clear my issue.
I have karbonn sparkle v (NOT ROOTED).this phone got september update and stuck at android is starting,optimizing applications and google logon screen.
Then i decided to factory reset the phone with recovery boot but didnt works.
i thought that may be recovered from installing old update i.e.august or previous..i searched and downloaded the update file and update from sd card as mentioned in some of the XDA posts...didnot work.
at final,i decided to stock recovery using SP flash tool.got stock rom and driver installed as mentioned in XDA post and other videos as well.MTK VCOM driver as well as mobile drivers installed and stock ROM downlaoded..But when i open latest SP flash tool and try to connect to phone.it did not.. it tried all possible ways to connect like removing battery ,or removing and inserting with volume button pressed or other...while connecting without battery ,nothing happens in PC driver list,no sound nothing.Sp flash tool doesnot recognise chip and downloading /flashing could not happened...
i had flashed some phones using same method and while connecting with pressing volume key ,flashing started.
But i this case ,what happened i dont know,device is not connected but charges and same stuck at boot screen and device manager shows SPARKLE V in portable device list.
I hope some help make my phone .
Click to expand...
Click to collapse
Greetings and welcome to assist. It looks like this may be an issue with finding the correct drivers for your phone. I found this post which may help you
https://forum.xda-developers.com/showpost.php?p=68372526&postcount=4
Good Luck
Sawdoctor