Related
Hey guys how are you?
Well a friend gave me an OPO that is really bricked.
Seems like it went to 0% of battery. I charged it to 100% but it does not boot. It stays in loop with the "cyanogen" logo
I tried every solution in every "hard brick resolution" thread.
Instaled ColorOS drivers, Samsung drivers, etc etc etc. nothing works, why? Well..
When i plug the phone on my computer, its recognized has MTP device. The "update driver" option is disabled. Its never recognized as qhsusb_bulk our adb or anything.
It does not seems to enter in fastboot mode ether, has i press vol up + power and it goes to the cyanogen logo again.
Im trying to do this recovery with an windows 10 64bit computer.
I tried to install qualcomm drivers also, but not compatible with my OS.
Not really sure what to do next..
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
Thank you! But the download links aren't working
cheveux_ said:
Thank you! But the download links aren't working
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
hea9vy said:
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
Click to expand...
Click to collapse
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Try it on a native USB port, so try different ports. Or if you have access to more than one pc/laptop try it on different ones.
I had the same issue a couple of months ago on my wife's oneplus. Spent an hour on my laptop and no go. Fired up the desktop and worked first time.
cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Cholerabob said:
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Click to expand...
Click to collapse
Yes. i Tried both :/
1st thing if it shows the cyanogen logo its not hard brick as per my knowledge.
Yes as suggested try different ports.
hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
hi. my friend. will this work for a 100% bricked? the phone cannot even show anything on screen
Sent from my ONE A2003 using Xparent BlueTapatalk 2
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
sanjeev7 said:
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
Click to expand...
Click to collapse
not working for me.
my PC cannot detect my opo
Sent from my ONE A2003 using Xparent BlueTapatalk 2
Can you get to fastboot?
evertking said:
Can you get to fastboot?
Click to expand...
Click to collapse
no. 100%bricked. go see the YouTube link above my pervious post
Sent from my ONE A2003 using Xparent BlueTapatalk 2
thx. my opo is un bricked. but now back to the problem before I bricked it.
the phone baseband is unknown (no efs save)
and the opo keeps rebooting every few second. is there a way to fix it?
Sent from my ONE A2003 using Xparent BlueTapatalk 2
So still no luck.
I have no fastboot and no recovery.
Has i connect the cable, it starts to charge.
If i click vol up + power it goes to the cyanogen logo and stays there...forever..
The problem is it is always recognized has "mtp device". I'm using an windows xp installation now...
Send me a PM and I'll try to help you!
Jeffrey98 said:
Send me a PM and I'll try to help you!
Click to expand...
Click to collapse
I think i can't send you messages, so here it goes
Hey Jeffrey! Has you asked, here is the pm.
So, in advance, thanks for your help. font know if this can be solved but its nice having someone interested in helping.
So, what i have:
- An OPO that doesn't boot.
- When i press the power button, it shows the one plus logo, and then the cyanogen logo, staying there forever..
- When i press vol up + power, it does the exactly same thing, never entering fastboot
- When i press vol down + power, it does the same thing. never entering recovery
I've prepared an old notebook with windows xp to unbrick the opo. Its completly clean.
The phone is always recognized has mtp device. I've installed all drivers on the internet. ColorOS, samsung, qualcomm, etc etc, everything. nothing works has its never detected in msm8974 or anything.
what can i do?
Thanks in advance
This might help!
If nothing works email oneplus and request for a remote session i did that and they flashed the os, and ps. while doing that they will tell you to download some files and in that some will be password protected and after completing the process they will delete the file so that we cant use it. If possible, after installing drivers they will tell u to reboot the system and log in back but after rebooting just copy the file to another place and then log in back so they can continue the process. Those files may be helpful for a lot of people.I have attached screen shots. Never mind the first folder, the remaining zip files are to be downloaded and in that two are password protected.
I used the LG Flash tool 2014 to CSE flash a kdz file, everything went alright until it finish loading at the Download mode. The phone turned off, computer can't detect my phone drive anymore. The phone is completely dead, can't charge and basically have no sign at all!!!!! When I now plug into the computer, it appears as OHSUSB_BULK on device manager. Please Please Please! Could any experts could help me out of this? Huge thank you!
hellobyelock118 said:
I used the LG Flash tool 2014 to CSE flash a kdz file, everything went alright until it finish loading at the Download mode. The phone turned off, computer can't detect my phone drive anymore. The phone is completely dead, can't charge and basically have no sign at all!!!!! When I now plug into the computer, it appears as OHSUSB_BULK on device manager. Please Please Please! Could any experts could help me out of this? Huge thank you!
Click to expand...
Click to collapse
Can you try to startup to download mode manually? If possible, then you still be able to flash the kdz again.
Follow this link.
http://www.android.gs/enter-lg-g-pro-2-download-mode/
bkcheah75 said:
Can you try to startup to download mode manually? If possible, then you still be able to flash the kdz again.
Follow this link.
To bkcheah75,
I can't even go to download mode nor the boot up LG logo page, is there any other method could save my phone please?
Click to expand...
Click to collapse
hellobyelock118 said:
bkcheah75 said:
Can you try to startup to download mode manually? If possible, then you still be able to flash the kdz again.
Follow this link.
To bkcheah75,
I can't even go to download mode nor the boot up LG logo page, is there any other method could save my phone please?
Click to expand...
Click to collapse
Press and hold the up volume button, then plug in the USB cable connected from computer.
Click to expand...
Click to collapse
bkcheah75 said:
hellobyelock118 said:
Press and hold the up volume button, then plug in the USB cable connected from computer.
Click to expand...
Click to collapse
Yeah man, I tried but still black screen with no sign at all!
Click to expand...
Click to collapse
When you press or hold the power button, do you see any screen popup with error?
The error you have seen, can you capture the screenshot and share to us?
I did encountered very bad problem on my GPRO2 before (When power up, it just showed few lines). I thought it was bricked, after few tries... I managed to fix it. I just trying to help here.
bkcheah75 said:
When you press or hold the power button, do you see any screen popup with error?
The error you have seen, can you capture the screenshot and share to us?
I did encountered very bad problem on my GPRO2 before (When power up, it just showed few lines). I thought it was bricked, after few tries... I managed to fix it. I just trying to help here.
Click to expand...
Click to collapse
Basically, I could not boot up my phone at all, tried to boot in download mode but still fail to do so. All I can see is when I plug in USB to the computer, it appears as QHSUSB_BULK on device manager. Please Help!
hellobyelock118 said:
Basically, I could not boot up my phone at all, tried to boot in download mode but still fail to do so. All I can see is when I plug in USB to the computer, it appears as QHSUSB_BULK on device manager. Please Help!
Click to expand...
Click to collapse
Hey man, any solution? Just got this problem too. Installed Xposed on my F350K running on 4.4.2. Computer only detected my phone as QHSUSB_BULK with a bunch of storage device. holy cow, just got this phone for 2 days
Tung Thanh Le plzz help me my phone lg g pro 2 f350s is dead Basically, I could not boot up my phone at all, tried to boot in download mode but still fail to do so. All I can see is when I plug in USB to the computer, it appears as QHSUSB_BULK on device manager. Please Help!
malikmaan said:
Tung Thanh Le plzz help me my phone lg g pro 2 f350s is dead Basically, I could not boot up my phone at all, tried to boot in download mode but still fail to do so. All I can see is when I plug in USB to the computer, it appears as QHSUmanager. SB_BULK on device Please Help!
Click to expand...
Click to collapse
hi bro contact me here is my number +233266680604 i can solve that ur phone complete dead problem 100%:good::good:
Solution
ther is a guide how to unbrick g3 same method can be followed for g pro 2 but here we dont need to open the phone as in that duide and chipset selection will be different all other steps are same here is the link https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
Since Xiaomi and Micro$oft released a public ROM of Windows 10 Mobile for Mi4, the curiosity drives me to try it. But I felt so uncomfortable after successfully installed win10 on my mi4.
So I decided go back to Android roms. But sh*t happened - my mi4 got bricked during the flashing.
Phone won't boot with black screen and no boot options. Holding any buttons (including power button + volume down more than 2 minutes) won't work.
The pc can not recognize a USB device after it is plugged in (in both Windows XP and Windows 8.1).
Then I plug it into my Mac OS X with a VirtualBox of Windows 7 OS inside.
The USB devices shows a unknown device of id 05C6:F006.
I did a lot of googling of 05c6:f006 which seems to be 05c6:9008 and something Qualcomm related.
And the most important thing is to make my computer to recognize it.
So things I need to figure out:
Is my phone hardware damaged or software damaged (hard bricked or soft bricked)?
Do I need to disassemble it?
How can I make my pc to recognize it ?
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
My phone was recognized as a USB input device, VID_05C6&PID_F006, seems to be Qualcomm_QHSUSB 9008 related
I have exacly the same probleme here, do you have find any solution ?
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
xiaomi mi4 lte not turn on
darkmaster566 said:
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
Click to expand...
Click to collapse
Good evening. I have a problem with my Xiaomi 4 lte, after trying to return from 6 to android 4.4 android after this tutorial : ]Now the phone does not start, if you stick to connect to PC loaded or red LED flashes once and the computer sounds like something I plugged in but not afiseaja nimicc device. He is charged for 24 hours and not start and MIFLASH program is not found
Mi4w hard brick
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
Hey! I had bymistakely flashed wrong partition and tried flash in miii 6.3.3 ROM....
Now my device is bricked....Whenever i connect to charger the red light blinks....And when connected to pc....The red light comes.....But no drivers come on my pc...Means its to recognising.....Can you help me please????
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Maybe you can try to follow this step :http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
If didnt work,maybe there is a problem in your hardware,try to service your phone to service center.
It didn't work.. Is there a way how to solve hardware problem?
Or trt another ways in this website
http://androidflagship.com/3217-fix-damaged-bricked-android-device
My note 10.1 N8000 have the same problem,i try to fix it,but its hard,so i send my phone to service person,they fix the hardware..
How much did you pay?
Growicek said:
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Click to expand...
Click to collapse
What tool are you using to flash the stock firmware .and it will be helpful if you say how exactly you bricked it
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Growicek said:
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Click to expand...
Click to collapse
So your saying the flashtool bricked your phone ?
Where did you get the firmware for your phone cuz flash tool can only brick your device if you used firmware not for your phone. Also does your phone shows any sign of life ie vibrate turn on for a sec, bootloop etc...
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Growicek said:
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Click to expand...
Click to collapse
I know two guys who had this problems.
1) guy took it to service ,they fixed it.
2) installed phone drivers again and tried again and it worked.
If you're confident you have the right firmware load scatter click download and connect your powered off phone without pressing any buttons ,and see if it works.
Anyway I'm narrowing down the cause of the problem to either an incorrect firmware or a sp flash tool version (some version are ****)
Didn't work
Growicek said:
Didn't work
Click to expand...
Click to collapse
Pull out the battery then leave it for 10 min reinsert and see if it boots (give it some time ) .if it doesn't
Or connect your phone to PC(without battery) ,load scatter click download on sp flash tool ,then put in the battery .
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Growicek said:
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Click to expand...
Click to collapse
What error code?
I bricked my device same as you so I could help you further but my device connected in meta mode and flashed its firmware fine ,so try another USB cord
Ps I've pretty much mentioned all I know about unbricking in this thread so I can't be of further help.https://www.google.co.in/url?sa=t&s...ggeMAA&usg=AFQjCNGkwgZbNQCJFWtm90DM-Mksnzk0dA look this up specifically #9
It didn't work.. Error is: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Growicek said:
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Click to expand...
Click to collapse
That's great ,what's the problem now ? Still brom error or download stuck st 0% or any other?
Still same brom error
Growicek said:
Still same brom error
Click to expand...
Click to collapse
Brom error is mostly related to see improper firmware which also explains why you're phone got bricked in the first place .
Try downloading another stock firmware
Man? I love you!!! I tried about four ROMs and the fourth is working!! .. There was a one more problem with flashing again with drivers, idk why but they dissapear, so I installed them again and then tried flash ROM.. Thank you very much! You saved my money!
Hello I was running a mi 5s plus with TWRP and everything was fine until I had a terrible idea of flashing the newest recovery rom from xiaomi through TWRP. It seemed to work but after a reboot my phone got stuck in a state where the screen is blank and I get no reactions from anything. When I connect it to PC and flash usin miFlash it says it was successful but the phone stays in that mode when I hold the power button i just hear the sound on my PC of the cable being connected and Dissconected but it still stays the same. In device manager it is called qualcomm hs-usb qdloader 9008. Please Help
Are you flashing the fastboot ROM?
Sent from my Xiaomi MI 5s Plus using XDA Labs
OKProductions said:
Hello I was running a mi 5s plus with TWRP and everything was fine until I had a terrible idea of flashing the newest recovery rom from xiaomi through TWRP. It seemed to work but after a reboot my phone got stuck in a state where the screen is blank and I get no reactions from anything. When I connect it to PC and flash usin miFlash it says it was successful but the phone stays in that mode when I hold the power button i just hear the sound on my PC of the cable being connected and Dissconected but it still stays the same. In device manager it is called qualcomm hs-usb qdloader 9008. Please Help
Click to expand...
Click to collapse
Hello,
I am stuck with the very same issue. After I flashed the Multi Lingual EU Rom everything went pitchblack and no more response to everything I tried. In device manager it says Quectel QD Loader 9008 (COM3), but nor in MI Flash neither in ADB + Fastboot I get any result.
So yes, I could really use all the help I can get. Thankx
I'm facing the same issue, no one found a solution?
4ur0r said:
I'm facing the same issue, no one found a solution?
Click to expand...
Click to collapse
try leave the phone for a week and charge
lp777 said:
try leave the phone for a week and charge
Click to expand...
Click to collapse
thanks for your reaply, i'll try leaving the phone for a while until battery drains out and then charge it.
4ur0r said:
thanks for your reaply, i'll try leaving the phone for a while until battery drains out and then charge it.
Click to expand...
Click to collapse
If someone else is facing this problem, I can confirm that leaving the phone discharging (while off) will make the phone exit EDL mode and then you just need to recharge it and it will work as before.