I got my opo a week back.I rooted it and installed twrp custom recovery.I was trying to install a new boot logo via adb which bricked my phone.I used chillstep1998 software to flash the boot logo.Now there is no display,no fastboot,no recovery and no adb.i tries searching and found this http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 ,but my opo is not recognized as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008.I tried connecting to several pcs but nothing changed.i connect the phone to my laptop but nothing happens either in computer or in device manager.
PLEASE HELP and thanks for helping
Try holding POWER + VOLUME UP for about 30 Secs (it will vibrate). Mine was recognized after that (had the same problem)
radopi said:
Try holding POWER + VOLUME UP for about 30 Secs (it will vibrate). Mine was recognized after that (had the same problem)
Click to expand...
Click to collapse
Thanks bro. Windows detected the phone but color.zip file link is not working. Please post any mirrors or alternative link for the file. Thanks again
There is a tool which flashes CM11s instead of Color OS here.
radopi said:
There is a tool which flashes CM11s instead of Color OS here.
Click to expand...
Click to collapse
Thanks bro. Everything done. My phone is alive again as good as new. Thanks again
Hello Everyone,
i tried flashing my INFINIX X507 with spflash tool, now my phone wont boot
1. It does not boot.
2. It does not show battery charging when i connect my charger while the phone is off (as it does normally)
3. Screen is completely off, no response to power button, screen remains dark as if ive done nothing to power on my device
YES, when I connect my device to my PC it detects and also when I unplug it from my PC it detects as well.
i have tried flashing with FlashTool and I get this message during download process
BROM ERROR: S_FT_DA_NO_RESPONSE(4001)
DA didnt send response data to FlashTool[HINT]
...................................................................................................................................................................................................................................
PLEASE PLEASE ANYONE HELP ME HERE
I AM STUCK, AND WORRIED ALOT.......What should I do now???????
DEVICE: Inifinx X507.
Buerto said:
Hello Everyone,
i tried flashing my INFINIX X507 with spflash tool, now my phone wont boot
1. It does not boot.
2. It does not show battery charging when i connect my charger while the phone is off (as it does normally)
3. Screen is completely off, no response to power button, screen remains dark as if ive done nothing to power on my device
YES, when I connect my device to my PC it detects and also when I unplug it from my PC it detects as well.
i have tried flashing with FlashTool and I get this message during download process
BROM ERROR: S_FT_DA_NO_RESPONSE(4001)
DA didnt send response data to FlashTool[HINT]
...................................................................................................................................................................................................................................
PLEASE PLEASE ANYONE HELP ME HERE
I AM STUCK, AND WORRIED ALOT.......What should I do now???????
DEVICE: Inifinx X507.
Click to expand...
Click to collapse
I'm sorry to say but maybe its hard bricked.
Sent from my GT-S7500 using XDA Free mobile app
Hey! When i install CM 12 / CM13 and Ressurection im getting blackscreen [phone didnt work, only power button, cmw too didnt work.] Please help me, i need new system because my is old.
xawierstudio said:
Hey! When i install CM 12 / CM13 and Ressurection im getting blackscreen [phone didnt work, only power button, cmw too didnt work.] Please help me, i need new system because my is old.
Click to expand...
Click to collapse
You can try to flash back the stock firmware (MUST be the 4.2.2 version) via flashtool, root and install TWRP recovery with this app (http://forum.xda-developers.com/xperia-l/development/app-recoveries-recovery-installer-t3187915).
I dont have any other ideas, make sure you do all that ROM flash stuff properly.
I faced the same issue just now... any update? @xawierstudio
satyapol07 said:
I faced the same issue just now... any update? @xawierstudio
Click to expand...
Click to collapse
It's maybe because of an improperly unlocked bootloader. just reflash latest stock rom (Latest one Here) and check the state of bootloader (it should be " Bootloader unlock Done"). else, if you have Xperia L, use This Link to unlock the bootloader and install TWRP recovery, then install your desired Custom ROM
Well, I think we are the last Survivors of this tough Taoshan at 2019!
Hey Thanks alot for the reference.. But I'm not sure how can I start my phone in bootloader or recovery mode as I cant see any display
satyapol07 said:
Hey Thanks alot for the reference.. But I'm not sure how can I start my phone in bootloader or recovery mode as I cant see any display
Click to expand...
Click to collapse
First, make sure your battery has enough charge to start. if not, then try charging it and then continue your testing. if it doesn't charge, then you should use external battery charger to directly charge your battery (or you may need to change your battery!?). after passing this step, use flashtool version 0.9.18.6 to flash stock rom.
For going into Flash mode, while your phone is off, press and hold volume down and connect it with cable to PC. now LED light should turn into green, and it should be in flash mode ! (nothing displays in screen)
Just got this phone from my friend - he erased too much in twrp recovery (whole partitions) and now can't turn it on. No bootloader mode, no flash mode. Only one com port is visible in device manager: Qualcomm HS-USB QDLoader 9008. Anybody with knowledge what to do on this model?
Franek_Dolas said:
Just got this phone from my friend - he erased too much in twrp recovery (whole partitions) and now can't turn it on. No bootloader mode, no flash mode. Only one com port is visible in device manager: Qualcomm HS-USB QDLoader 9008. Anybody with knowledge what to do on this model?
Click to expand...
Click to collapse
I think these are the signs of hard bricking (or the memory has ended his life). more info and discussions can be found HERE. till now, NO absolute working method has been found for Xperia L. sorry, but I don't have much info about this issue (Although I have this phone too)
I was on Masik X 4.1. Phone was working just fine.
I downloaded Masik X 5, installed it over 4.1. Flashing goes very well but at the end phone become dead.
No response on USB, No Driver on PC at all. Phone is complete dead.
Just noticed that I mistakenly downloaded "Masik P Tulip.zip" and flashed it blindly. There was no warning regarding File Mismatch in TWRP.
Very very bad luck.
I manged to bring phone into EDL Mode by testpoint method. Phone flashed successfully with both Qfil and Miflash.
Flashed many many times, tried all files available on different threads but phone is now permanently stuck in EDL mode and dont reboot after successful flashing.
Phone flashed successfully every time but I cant get rid of EDL Mode aka Qdloader 9008.
Plz help me to get my phone out of Qdloader 9008 mode.
Anybody please help me.................................
press power button for more than 30 seconds to get out of edl mode.
yawarniazi said:
I was on Masik X 4.1. Phone was working just fine.
I downloaded Masik X 5, installed it over 4.1. Flashing goes very well but at the end phone become dead.
No response on USB, No Driver on PC at all. Phone is complete dead.
Just noticed that I mistakenly downloaded "Masik P Tulip.zip" and flashed it blindly. There was no warning regarding File Mismatch in TWRP.
Very very bad luck.
I manged to bring phone into EDL Mode by testpoint method. Phone flashed successfully with both Qfil and Miflash.
Flashed many many times, tried all files available on different threads but phone is now permanently stuck in EDL mode and dont reboot after successful flashing.
Phone flashed successfully every time but I cant get rid of EDL Mode aka Qdloader 9008.
Plz help me to get my phone out of Qdloader 9008 mode.
Anybody please help me.................................
Click to expand...
Click to collapse
AFAIK , there's no such things as "automatically reboot after successfully flashed the device"
I was also in this condition but with different phone (it was Redmi 4 Prime (markw)), and all I did is just disconnect the battery form the circuit and then replug it, then I can boot to the system successfully
Hope it helps, but if it isn't then maybe something wrong
Hello everyone,
History : So i was using Rice driod on my OP 8T peacefully and i got an update on the rom. i installed the update via local update of the rom and after reboot the phone never booted back. i tried all button combos to make to boot anything like fastboot or recovery etc but nothing worked.
Problem : While connecting to PC the device shows as "Qualcomm HS Diagnostic 900E" I know it should show as 'qualcomm hs loader 900' something which indicates EDL state. So i can't perform MSM. There are not port showing in MSM either. Its blank. Even after forcefully trying to boot EDL ( button combos ), it always boots back to same state.
Fixes i have tried : Reinstalled qualcomm drivers many times, also tried many other versions of MSM including the Hydrogen OS one. No solution.
Can anyone please help me with this situation. Its been few days now and i have really no hope left with the device.
alp47470 said:
Hello everyone,
History : So i was using Rice driod on my OP 8T peacefully and i got an update on the rom. i installed the update via local update of the rom and after reboot the phone never booted back. i tried all button combos to make to boot anything like fastboot or recovery etc but nothing worked.
Problem : While connecting to PC the device shows as "Qualcomm HS Diagnostic 900E" I know it should show as 'qualcomm hs loader 900' something which indicates EDL state. So i can't perform MSM. There are not port showing in MSM either. Its blank. Even after forcefully trying to boot EDL ( button combos ), it always boots back to same state.
Fixes i have tried : Reinstalled qualcomm drivers many times, also tried many other versions of MSM including the Hydrogen OS one. No solution.
Can anyone please help me with this situation. Its been few days now and i have really no hope left with the device.
Click to expand...
Click to collapse
complete noob here but I have heard someone said they fixed using indian msm tool, maybe I am wrong, idk
LR7875 said:
complete noob here but I have heard someone said they fixed using indian msm tool, maybe I am wrong, idk
Click to expand...
Click to collapse
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
alp47470 said:
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
Click to expand...
Click to collapse
does the computer even detect your device? what name of the device does it show up
alp47470 said:
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
Click to expand...
Click to collapse
1st, make sure your device is connected and recognized as 9008 HS-USB QDLoader.
2nd, try using MSM of 9R Ported ROM for 8T, it works in almost every situation
LinhBT said:
1st, make sure your device is connected and recognized as 9008 HS-USB QDLoader.
2nd, try using MSM of 9R Ported ROM for 8T, it works in almost every situation
Click to expand...
Click to collapse
The 1st one is main problem. It doesn't recognise as 9008 HS-USB QDLoader, it always keeps showing to 900E mode.
just a long shot, as i am on a 5t not the 8, but has windoze perhaps updated and "fixed" the usb driver on your behalf?
my 5t was invisible after unlocking, until i forced windoze to update the driver to an unsigned (working) version
[EOL][11.0][OFFICIAL] LineageOS 18.1 for Oneplus 5 & 5T
Is there anybody out there!ðŸ¤
forum.xda-developers.com
alp47470 said:
The 1st one is main problem. It doesn't recognise as 9008 HS-USB QDLoader, it always keeps showing to 900E mode.
Click to expand...
Click to collapse
That's a total different device state, it's on Diag mode, not EDL mode. Try to turn off the device COMPLETELY, then either using hardkeys ( VOL + VOL - press and hold at the same time, plug in cable ) or use Deep-Fash cable to put the device into correct EDL 9008 mode.
So, guys i was finally able to fix the device by EDL point method. Somehow the device was able to boot to edl anyhow. The drivers were correct and so was the cable etc, Thank you all for still helping me.
So relieved so my 8T alive again.
alp47470 said:
So, guys i was finally able to fix the device by EDL point method. Somehow the device was able to boot to edl anyhow. The drivers were correct and so was the cable etc, Thank you all for still helping me.
So relieved so my 8T alive again.
Click to expand...
Click to collapse
Could you please be more specific as to how you got it to connect in EDL mode - it would help others who end up in the same situation.
BillGoss said:
Could you please be more specific as to how you got it to connect in EDL mode - it would help others who end up in the same situation.
Click to expand...
Click to collapse
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel, reboot
Thanks for sharing that - much appreciated.
alp47470 said:
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel.
Click to expand...
Click to collapse
So the localshop is using Testpoint trick. It has the same effect as using Deep-Flash cable but more trustable, only that u will have to open the back cover.
Congrats on successfully rescue the device mate
LinhBT said:
So the localshop is using Testpoint trick. It has the same effect as using Deep-Flash cable but more trustable, only that u will have to open the back cover.
Congrats on successfully rescue the device mate
Click to expand...
Click to collapse
Thanks bro. Actually the shop kepper didn't do anything. Instead he was saying that the battery was damaged or something (probably scamming me) or he actually didn't had any idea for real. I had read about EDL point thing, so i just asked the shopkeeper to just remove the back panel. Rest i came home and did everything lol. NGL it was scary as hell.
In the process i also discovered that 8T and 9R being mostly identical also have same EDL points on motherboard. Same positioning too.
alp47470 said:
Thanks bro. Actually the shop kepper didn't do anything. Instead he was saying that the battery was damaged or something (probably scamming me) or he actually didn't had any idea for real. I had read about EDL point thing, so i just asked the shopkeeper to just remove the back panel. Rest i came home and did everything lol. NGL it was scary as hell.
In the process i also discovered that 8T and 9R being mostly idenical also have same EDL points on motherboard. Same positioning too.
Click to expand...
Click to collapse
Ah I see, same here when I 1st try the Testpoint trick few years back, scary as hell cuz that was the only phone I had at that time ))))
Btw, yes, 9R and 8T shares almost everything besides of SOC's name ( Snap870 in fact is Snap865 OCing ). That's why I told u to use the MSM Tool of 9R port ROM for 8T, it passes almost every errors u may face when using MSM of 8T itself!
alp47470 said:
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel, reboot
Click to expand...
Click to collapse
Hi, I'm the same boat after a bad flash of OSS12, hard brick, black screen, not detected in Windows devices manager, no vibration with every button combination ...
Could you share where the edl points are on the OnePlus 8T motherboard please ?
I would be eternally grateful!
NZX-DeSiGN said:
Hi, I'm the same boat after a bad flash of OSS12, hard brick, black screen, not detected in Windows devices manager, no vibration with every button combination ...
Could you share where the edl points are on the OnePlus 8T motherboard please ?
I would be eternally grateful!
Click to expand...
Click to collapse
Here.. hope it helps