Related
So after using CM14.1 and other ROMs based on it for days. One thing I felt missing was sRGB mode.
There were some ROMs which had sRGB mode forced in but some users wanted to switch it.
Hence I made a quick app to switch between sRGB modes therefore anyone can use it to their accordance.
This may not be the perfect app but it works.
I know there are some limitations such as it resets on reboot and app doesn't know if sRGB mode is enabled or not but soon I will fix it.
Also I will few features to it in future if needed.
This is just a temporary solution for current CM 14.1 ROMs till sRGB gets fixed.
Just tried this app on a recent CM 14.1 build and is working smooth.
Really need sRGB mode to enjoy my experience with OP3.
Thanks a lot!
I'm on latest RR from Eliminater (11 Dec). Even if rooted, the app doesn't work
LuckyNuke1310 said:
I'm on latest RR from Eliminater (11 Dec). Even if rooted, the app doesn't work
Click to expand...
Click to collapse
Official rr work fine.
Tnx a lot to developer.
Works great! However, I have to re-toggle the switch after every reboot. Any chance you could share the sources so I could program it to run at boot?
Sammekl said:
Works great! However, I have to re-toggle the switch after every reboot. Any chance you could share the sources so I could program it to run at boot?
Click to expand...
Click to collapse
They are at GitHub.com/rajparekh07.
I didn't get the time lately to work on these but yeah I was going to make work on every boot.
Sent from my ONEPLUS A3003 using Tapatalk
raj.parekh07 said:
They are at GitHub.com/rajparekh07.
I didn't get the time lately to work on these but yeah I was going to make work on every boot.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I actually made it myself this afternoon it's at github.com/Sammekl/
I will use your sources and create a pull request for you once it's done!
EDIT: Done, check your pull requests
thanks for the app!
any chance of the update to run automatically after reboot?
It's on the GitHub page already, so you could manually build it if you Android Studio or any other build tool. I could provide you with an unsigned apk if you'd like..
So I was flashing roms and stuff, but the only issues I had with custom roms is that there was no switch to disable dt2w. I personally use dt2w, as our mido has a massive battery life. But ofc, many don't like it. So here it is. Flashable zips to both enable and disable double tap to wake. Just flash in recovery over any rom. Do not flash over miui roms, as there is already a switch.
Ps. The kernel source is out now, so a switch for dt2w will be out soon. But till then, you can use this workaround
Vidhanth said:
So I was flashing roms and stuff, but the only issues I had with custom roms is that there was no switch to disable dt2w. I personally use dt2w, as our mido has a massive battery life. But ofc, many don't like it. So here it is. Flashable zips to both enable and disable double tap to wake. Just flash in recovery over any rom. Do not flash over miui roms, as there is already a switch.
Ps. The kernel source is out now, so a switch for dt2w will be out soon. But till then, you can use this workaround
Click to expand...
Click to collapse
Hi Vidanth, nice to see you here buddy. Coming from Moto G 2014.
Looking forward to ur great work for mido as well.
@Vidhanth this broke display rotation for me
Sent from my Redmi Note 4 using Tapatalk
Does dt2w consumes more battery?
Te$la said:
Does dt2w consumes more battery?
Click to expand...
Click to collapse
Of course! Not to much, not to little
is there a switch in custom roms now? lineage os for example?
Doesnt work on nikel. project aosp x lineage rom.
It works perfectly, thank you.
Workeddddd!!!
Thank you so much. It worked flawlessly.
Excuse me, what is the DT2w?
Not working for me
magnet1215 said:
Excuse me, what is the DT2w?
Click to expand...
Click to collapse
Double tap to wake!
Kuchayhilal said:
Not working for me
Click to expand...
Click to collapse
If you are rooted, you can run this command from a root terminal
Code:
echo "0" > /proc/touchpanel/enable_dt2w
You will need to do it on each reboot (eg, via an init.d script, or perhaps with something like Kernel Adiutor).
With or without root?
Hi, does this work without root? If so would you explain in detail how to do it?
I absolutely hate double tap to wake!
Also any tests with android 8.1?
Will this also work on Android One?
(Xiaomi MI A2 Lite)
saleyman said:
Will this also work on Android One?
(Xiaomi MI A2 Lite)
Click to expand...
Click to collapse
I have the same doubt, will this work on Android one official firmware or do I need to flash a custom kernel? (Xiaomi MI A2)
Is it good for land
sorry out of topic, but how to double tap to sleep the screen?
Switch donot work in miui 11 rom...so need a zip to disable it...there is no option in kernel auditor app to disable DT2W...please help
Download The Module Of MultiFunctions From This Thread https://forum.xda-developers.com/apps/magisk/module-multifunctions-bootloop-t3933386 For Getting The Ability To Use The Function Of DT2WStatus Inverter To Invert The Default DT2W Status ([From Disabled To Enabled] Or [From Enabled To Disabled]).
P.S. The Installed/Flashed Rom/Kernel Must Support The Feature Of DT2W (DoubleTap2Wake)
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Video recording (working but laggy if you want to watch it)
SELinux
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Changelog
Code:
[B]lineage-15.1-20180722-UNOFFICIAL-eagle.zip[/B]
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180707-UNOFFICIAL-eagle.zip[/B]
Fix low volume
Fix livedisplay
Fix kernel local version
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180624-UNOFFICIAL-eagle.zip[/B]
Initial release
Troubleshooting
Video recording
Video recording is broken in stock camera, just install
https://play.google.com/store/apps/details?id=com.simplemobiletools.camera
as workaround for now.
Playstore show not certified
Try to clean app data and cache first, if its not working for any reason read this
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Low RAM Configuration
Add the four lines into your build.prop with any rootexplorer you want, save it and restart your phone to activate them.
Code:
# Low memory device
ro.config.low_ram=true
# Force high-end graphics in low ram mode
persist.sys.force_highendgfx=true
If you need more information read this
https://source.android.com/devices/tech/perf/low-ram#intro
sgspluss said:
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Information
This are unofficial builds made by myself, will fix things, resync and rebuild it if i'll find some free time.
What's working
Mostly everything.
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Click to expand...
Click to collapse
did you fix some problems in this version?
i mean is there any different from the rom BETA 2?
and what abut laging? did you fix it?
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
sgspluss said:
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
Click to expand...
Click to collapse
great news..iam ready for start testing..i will report if i found somthing
hooooossamq said:
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.
Click to expand...
Click to collapse
snap is better because it uses newer drivers and open source (like the rom itself). and there is no point if you add sony camera because it is an AOSP rom, it meant to be pure android (except lineage tweaks)
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
hooooossamq said:
what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
Click to expand...
Click to collapse
Thats not that easy as you think, because need to port this app to the api, but apart of this i want to stay close as possible to lineage.
hooooossamq said:
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
Click to expand...
Click to collapse
Afaik there will be no odex files, if there are one i will change it in next update. To be honest, did not check it.
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Hrustus said:
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
Click to expand...
Click to collapse
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
hooooossamq said:
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Click to expand...
Click to collapse
Are they also present in builds befor?
Sent from my athene using XDA Labs
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Click to expand...
Click to collapse
Unfortunately no, but maybe somebody else remember version. Hmmm... Actually I am not sure that Magisc was working on LineageOS or on Ressurection ROM...
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Are they also present in builds befor?
Sent from my athene using XDA Labs
Click to expand...
Click to collapse
the lag is much more in your bulid..light bar was working in BEAT 2.
style day and night bug was present in BETA 2..
i was test ALPHA 4 before.every thing working of the bug i say before expact the light bar.and its the most smoth version.. its lagy.. but most smother than all
About problem with magisk, we are also unable to install the magisk manager will look into it whats the reason.
About lags and bugs its strange because i am using same sources, as you can read.
If Something not working logs are helpfull otherwise it takes more time to figure out whats wrong.
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Sent from my athene using XDA Labs
sgspluss said:
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Click to expand...
Click to collapse
and here goes my report (very early report, i will add more information)
1-) without gapps, there is some frame dropping in animations and recent apps section (with or without android go mode) but it is same as beta 2, but a bit slower than 8.0 versions. i wonder is there a huge change under the hood between two versions
2-) no lag present in bootanimation, that's unexpected
3-) front camera video works
4-) dark mode works just fine
summary: our device can't handle gapps, that's what i see here. there are minimal frame droppings. also rom is odexed sadly
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Sent from my athene using XDA Labs
sgspluss said:
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Click to expand...
Click to collapse
go optimization is better for our device for sure, but this recent apps lag holds me back. but without go and using microg, rom holds up pretty good actually.
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Sent from my athene using XDA Labs
sgspluss said:
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Click to expand...
Click to collapse
as i said before, i am using rom with low_ram=false, and there is less lag compared to go enabled mode.
hello
Me too "low_ram=false" make my m2 less laggy
Thank you for your work
I decided to start this thread because all the other GCAM port threads aren't up to date ,specially with the increasing number of APKS
so,let's get started
Disclamer
The Camera2api port for our device is buggy as hell not only that but the dual pixel technology libraries are f**** by OnePlus so to overcome that and get both portrait mode working and front camera hdr+
you must be rooted(or at least have a custom recovery)
for non root you can still use HDR+ only for the back camera with lots of dots!
Downloads
A-rooted downloads 1-the lib fix FOR ANDROID 8.1 ONLY
FOR ANDROID 9 PIE OOS 9.0.6 and above
2-Pixel Colours(optional)For OOS 9.0.6 and above you need Pixel Colours v3.0 HERE
B-APK download that's a bit easy
1-New Best Version Urnyx based on GCam 6.2 is excellent thanks Urnyx Download latest here
2-Gcam based on 5.1 Urnyx05 v6.2 for any OS for the 5t oreo and up of course
Settings
-For Gcam based on 5.1 only This one contains the settings I personally use with the current Google camera version Urnyx05 6.2 to get best results after testing many times(you can find yourself better settings anyways).
-the settings are attached as images in the post feel free to test them out.
Thanks, been looking for something like this an updated one. Using Urnyx and thanks for the settings
5star02707 said:
Thanks, been looking for something like this an updated one. Using Urnyx and thanks for the settings
Click to expand...
Click to collapse
You're Welcome
Lib fix breaks any audio mod like v4a, ainur, Dolby...
If you have audio mods and lib fix installed, any audio mod will not work and camera will not work in any app including stock camera app
You have to choose between camera or audio
SUPER KOKA said:
Lib fix breaks any audio mod like v4a, ainur, Dolby...
If you have audio mods and lib fix installed, any audio mod will not work and camera will not work in any app including stock camera app
You have to choose between camera or audio
Click to expand...
Click to collapse
use a custom kernel
and set it to permissive using a magisk module
or any other app
AlMaghraby said:
use a custom kernel
and set it to permissive using a magisk module
or any other app
Click to expand...
Click to collapse
I'm just warning the others before they come complaining about that :good:
SUPER KOKA said:
I'm just warning the others before they come complaining about that :good:
Click to expand...
Click to collapse
You can get both with permissive kernel
Works on OB20?
Ritwik Rahman said:
Works on OB20?
Click to expand...
Click to collapse
stated in the OP you need magisk to get it fully working
SUPER KOKA said:
Lib fix breaks any audio mod like v4a, ainur, Dolby...
If you have audio mods and lib fix installed, any audio mod will not work and camera will not work in any app including stock camera app
You have to choose between camera or audio
Click to expand...
Click to collapse
In my case, using the Lib Fix in the link, doesn't break the stock camera (didn't try any audio mod). But if I update the module from magisk (to the last version), that one is breaking the stock camera.
I am using blu spark kernel. What does it mean to set it to permissive and how do I do that? Any side effects (potentially unwanted) by doing that?
derei said:
In my case, using the Lib Fix in the link, doesn't break the stock camera (didn't try any audio mod). But if I update the module from magisk (to the last version), that one is breaking the stock camera.
I am using blu spark kernel. What does it mean to set it to permissive and how do I do that? Any side effects (potentially unwanted) by doing that?
Click to expand...
Click to collapse
kernel is either enforcing or permissive
hence the name suggests
permissive 'permits' apps from overriding system policies
enforcing enforces system policies
so use permissive when you have an app that requires it only
It theoritically impacts security
specially if you don't know what apps to install or don't get them from a trusted source
Do you know if they have a chance that the app damage my phone ? (OnePlus 5T Android 8.1 OxygenOs 5.1.7)
Supsyne said:
Do you know if they have a chance that the app damage my phone ? (OnePlus 5T Android 8.1 OxygenOs 5.1.7)
Click to expand...
Click to collapse
no damage don't worry
follow the guide and settings
AlMaghraby said:
no damage don't worry
follow the guide and settings
Click to expand...
Click to collapse
Thanks
AlMaghraby said:
I decided to start this thread because all the other GCAM port threads aren't up to date ,specially with the increasing number of APKS
so,let's get started
Disclamer
The Camera2api port for our device is buggy as hell so to overcome that and get both portrait mode working and front camera hdr+
you must be rooted(or at least have a custom recovery)
for non root you can still use HDR+ only for the back camera with lots of dots!
Downloads
A-rooted downloads 1-the lib fix FOR ANDROID 8.1 ONLY
FOR ANDROID 9 PIE OPEN BETA ONLY
2-Pixel Colours(optional) OREO ONLY I did not test on PIE(you can test yourself and report back
B-APK download that's a bit easy
1-by far the most stable is Urnyx05 v6.2 for any OS for the 5t oreo and up of course
2-latest apk based on the new pixel 3 camera with night sight (but still has issues like green tint) you can find it HERE
3-Arnova's latest HERE
Settings
-This one contains the settings I personally use with the current Google camera version Urnyx05 6.2 to get best results after testing many times(you can find yourself better settings anyways).
-the settings are attached as images in the post feel free to test them out.
Click to expand...
Click to collapse
Urnxy05 v6.2 is giving pinkish tint?? Do I need root for that??
rubai018 said:
Urnxy05 v6.2 is giving pinkish tint?? Do I need root for that??
Click to expand...
Click to collapse
try to remove pink tint from all cameras
settings/advanced/fixes
Hi all. Firstly, this camera is great. Using it on lineage with microg and using your suggested settings and am having no problems.
The only issue I see is that in lower light I experience lag when in portrait mode. Anyone know a solution to this?
adamokari said:
Hi all. Firstly, this camera is great. Using it on lineage with microg and using your suggested settings and am having no problems.
The only issue I see is that in lower light I experience lag when in portrait mode. Anyone know a solution to this?
Click to expand...
Click to collapse
less light = slower shutter
it is slower to get a decent image quality
and I don't think it's that slow
anyway there is no fix to that at least without affecting image quality
When I take photo I obtain something purple
Supsyne said:
When I take photo I obtain something purple
Click to expand...
Click to collapse
because you are not rooted and did not install the fix
use Urnyx05 v6.2 and in fixes enable remove pink from all cameras
Hey people,
While I use gcam mod usually by san1ty for pictures and open camera for video(I want to control bitrate and other options)
I just found this gcam mod from UltraM8. It's just like san1ty's but you can use the second back camera!
The only negative is that trying night mode crashes the app, I've send a message to the UltraM8's post and if it fixes that, you can give it a go
What do you think about this?
P.S. also this gcam version has some selection of bitrates for video recording
Best Camera app is this by Urnyx05 !
LINK
It's based on Gcam 7.3, it support dual camera (enable it on settings), night sight works well and it supports AstroPhoto!!
And there are a lot of settings that you can use it
fefuzzo said:
Best Camera app is this by Urnyx05 !
LINK
It's based on Gcam 7.3, it support dual camera (enable it on settings), night sight works well and it supports AstroPhoto!!
And there are a lot of settings that you can use it
Click to expand...
Click to collapse
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
Yes probably is an issue related to LOS...i'm on latest xiaomi.eu and it works without problems and no need any configuration, i only enabled Telephoto on Camera Settings.
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
Same thing here with ExtendedUI
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
same on pixel experience ...
On xiaomi.eu 12-10.
Urnyx05 camera switch is working and night mode, but 360° and slowmo crashes.
So still searching for the ultimate mi mix 2s gcam mod 7.3 (or any other).
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
Could have something to do with selinux. As far as I know second lens is only working in permissive on custom roms
Oxofrmbl said:
Could have something to do with selinux. As far as I know second lens is only working in permissive on custom roms
Click to expand...
Click to collapse
Man, you're a genius, that was it!
To everyone else using this camera mod, just set Selinux to permissive and the second camera works. I'm on Lineage OS 17.1.
How to change SELinux Android 10
igor_anta said:
Man, you're a genius, that was it!
To everyone else using this camera mod, just set Selinux to permissive and the second camera works. I'm on Lineage OS 17.1.
Click to expand...
Click to collapse
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
the BSG mod is the one that will always work without any crashes on anything on our device.
Sir_Bommel said:
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
Click to expand...
Click to collapse
I don't think it's a possibility without root unfortunately, I used a Magisk module for that :-/
igor_anta said:
Man, you're a genius, that was it!
To everyone else using this camera mod, just set Selinux to permissive and the second camera works. I'm on Lineage OS 17.1.
Click to expand...
Click to collapse
Hey, how did you make it work? I'm using Urnyx05 latest gcam on LOS 17.1 2020-04-23 build with Camera2Api enabled plus SELinux permissive and it just keeps crashing when I switch to x2.
I'm seeing that LOS merged some changes for Camera2 on may, but builds newer than april are not out yet, did you build it yourself?
Thanks!
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
You just need to set SELinux to permissive. Install this Magisk module: https://github.com/evdenis/selinux_permissive
Telephoto now works by default on latest LOS 17.1 nightly
No need to change SELinux to be permissive or to install a magisk module to enable camera2api, just update to lineage-17.1-20200529-nightly-polaris-signed.zip, they merged some camera2api stuff and now Telephoto, or second camera, works.
I'm using Urnyx05 latest gcam, it works flawlessly, just don't try to use Slow-mo or stop astrophotography while it's taking a photo because it will crash. I tried UltraCam and it works too, but zooming crashes the app for me.
Worth a try using san1ty's and BSG's gcam too. Though I believe san1ty disabled aux/tele camera on their mod.
And use Google Photos instead of default gallery app to stop weird behaviour while using gcam.
Sir_Bommel said:
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
Click to expand...
Click to collapse
I think you can do it with adb and the set enforce command. Look for that. But I think you have to enable it after every reboot again.
Or look for a twrp flash able zip which changes it
Edit: you can try this https://www.cyanogenmods.org/downloads/permissiver-v4-for-android-10/#
I think you have to flash it after every update
With TWRP you can
Sir_Bommel said:
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
Click to expand...
Click to collapse
Without root your phone you can change selinux to permissive with this zip (flash in TWRP)
THREAD CLOSED
@evronetwork A GCam discussion thread already exists, hence this thread is being closed. Kindly continue the discussion in the existing thread, if need be.
Link to existing thread: https://forum.xda-developers.com/xiaomi-mi-mix-2s/themes/google-camera-mod-t3792143
Thanks for your cooperation and understanding.
Regards,
shadowstep
Forum Moderator