Hey people,
While I use gcam mod usually by san1ty for pictures and open camera for video(I want to control bitrate and other options)
I just found this gcam mod from UltraM8. It's just like san1ty's but you can use the second back camera!
The only negative is that trying night mode crashes the app, I've send a message to the UltraM8's post and if it fixes that, you can give it a go
What do you think about this?
P.S. also this gcam version has some selection of bitrates for video recording
Best Camera app is this by Urnyx05 !
LINK
It's based on Gcam 7.3, it support dual camera (enable it on settings), night sight works well and it supports AstroPhoto!!
And there are a lot of settings that you can use it
fefuzzo said:
Best Camera app is this by Urnyx05 !
LINK
It's based on Gcam 7.3, it support dual camera (enable it on settings), night sight works well and it supports AstroPhoto!!
And there are a lot of settings that you can use it
Click to expand...
Click to collapse
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
Yes probably is an issue related to LOS...i'm on latest xiaomi.eu and it works without problems and no need any configuration, i only enabled Telephoto on Camera Settings.
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
Same thing here with ExtendedUI
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
same on pixel experience ...
On xiaomi.eu 12-10.
Urnyx05 camera switch is working and night mode, but 360° and slowmo crashes.
So still searching for the ultimate mi mix 2s gcam mod 7.3 (or any other).
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
Could have something to do with selinux. As far as I know second lens is only working in permissive on custom roms
Oxofrmbl said:
Could have something to do with selinux. As far as I know second lens is only working in permissive on custom roms
Click to expand...
Click to collapse
Man, you're a genius, that was it!
To everyone else using this camera mod, just set Selinux to permissive and the second camera works. I'm on Lineage OS 17.1.
How to change SELinux Android 10
igor_anta said:
Man, you're a genius, that was it!
To everyone else using this camera mod, just set Selinux to permissive and the second camera works. I'm on Lineage OS 17.1.
Click to expand...
Click to collapse
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
the BSG mod is the one that will always work without any crashes on anything on our device.
Sir_Bommel said:
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
Click to expand...
Click to collapse
I don't think it's a possibility without root unfortunately, I used a Magisk module for that :-/
igor_anta said:
Man, you're a genius, that was it!
To everyone else using this camera mod, just set Selinux to permissive and the second camera works. I'm on Lineage OS 17.1.
Click to expand...
Click to collapse
Hey, how did you make it work? I'm using Urnyx05 latest gcam on LOS 17.1 2020-04-23 build with Camera2Api enabled plus SELinux permissive and it just keeps crashing when I switch to x2.
I'm seeing that LOS merged some changes for Camera2 on may, but builds newer than april are not out yet, did you build it yourself?
Thanks!
igor_anta said:
Sounded so promising, yet I get crashes when switching to telephoto. Might be an issue with Lineage OS 17.1 tho, or some specific config I need to tweak. I'll test out the rest of the features and let you know how it works, thanks for the suggestion
Click to expand...
Click to collapse
You just need to set SELinux to permissive. Install this Magisk module: https://github.com/evdenis/selinux_permissive
Telephoto now works by default on latest LOS 17.1 nightly
No need to change SELinux to be permissive or to install a magisk module to enable camera2api, just update to lineage-17.1-20200529-nightly-polaris-signed.zip, they merged some camera2api stuff and now Telephoto, or second camera, works.
I'm using Urnyx05 latest gcam, it works flawlessly, just don't try to use Slow-mo or stop astrophotography while it's taking a photo because it will crash. I tried UltraCam and it works too, but zooming crashes the app for me.
Worth a try using san1ty's and BSG's gcam too. Though I believe san1ty disabled aux/tele camera on their mod.
And use Google Photos instead of default gallery app to stop weird behaviour while using gcam.
Sir_Bommel said:
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
Click to expand...
Click to collapse
I think you can do it with adb and the set enforce command. Look for that. But I think you have to enable it after every reboot again.
Or look for a twrp flash able zip which changes it
Edit: you can try this https://www.cyanogenmods.org/downloads/permissiver-v4-for-android-10/#
I think you have to flash it after every update
With TWRP you can
Sir_Bommel said:
Hi,
is there a way to change SELinux without root on Android 10?
Could you just explane it? I googeld it and didn't find a methode that works for me :-/
Thx anx cheers
Sir_Bommel
Click to expand...
Click to collapse
Without root your phone you can change selinux to permissive with this zip (flash in TWRP)
THREAD CLOSED
@evronetwork A GCam discussion thread already exists, hence this thread is being closed. Kindly continue the discussion in the existing thread, if need be.
Link to existing thread: https://forum.xda-developers.com/xiaomi-mi-mix-2s/themes/google-camera-mod-t3792143
Thanks for your cooperation and understanding.
Regards,
shadowstep
Forum Moderator
Related
Hello,
i know that there are many Camera Ports and Mods out there and i wondered if we could put all in one Collection?
Which do you know?
-Google Camera Pixel 2 HDR+ Port
-Oneplus 5 Port
-Moto Port
I do not know much. Can you help me? Maybe with links?
Maybe we can create a threat like:
https://forum.xda-developers.com/mi-5/themes/app-collection-camera-modded-t3591177
by the way, do you know if the Ports for Xiaomi mi5 above work for Redmi Note 4 (Snapdragon)?
Thank you.
i tested the oneplus camera(both the v8 and 2.0.0 version) from the link you gave and compared it with the oneplus camera from this link https://forum.xda-developers.com/re...s-5-camera-port-redmi-note-4-7-0-t3656125.The best of these 3 is the oneplus5 2.0.0 version but iso on the pro mode does not work.If you have to choose between the oneplus5, the moto g5 camera and the google camera,google camera is the best in my opinion.Also,i have a sony sensor
It depends on your camera sensor... Photo or video, And how you take photos, manual or point n shot.
Mine is omnivision, I just care about still photoshot, I never record video. Then I don't want to mess with manual mode. So, the best mod is google camera hdr+ and snap camera with LLM mode.
Do you know if we can install and use the ports from link above in my first post?
Im getting pink images on hdr on front camera alone
Does the Google camera work on miui 9?
manuelbvb said:
Do you know if we can install and use the ports from link above in my first post?
Click to expand...
Click to collapse
Hello there , your link directed me to the thread created by arnova8g2. I can assure you you can use the camera mods mentioned there . I am using gcam builds and miui cam ports from that thread . So far no major issues for me
adamix94 said:
Does the Google camera work on miui 9?
Click to expand...
Click to collapse
Yes . The only requirement is camera2api (search it ). thank you
Boomshiva said:
Hello there , your link directed me to the thread created by arnova8g2. I can assure you you can use the camera mods mentioned there . I am using gcam builds and miui cam ports from that thread . So far no major issues for me
Yes . The only requirement is camera2api (search it ). thank you
Click to expand...
Click to collapse
Done it..works now...thanks
Boomshiva said:
Hello there , your link directed me to the thread created by arnova8g2. I can assure you you can use the camera mods mentioned there . I am using gcam builds and miui cam ports from that thread . So far no major issues for me
Yes . The only requirement is camera2api (search it ). thank you
Click to expand...
Click to collapse
Great. Thank you.
I installed google camera and it worked. Not perfect (Front cam and few functions do not work) but it works.
But i did not install camera2api. But i am in resurrection remix. Maybe i do not have to install it?
manuelbvb said:
Great. Thank you.
I installed google camera and it worked. Not perfect (Front cam and few functions do not work) but it works.
But i did not install camera2api. But i am in resurrection remix. Maybe i do not have to install it?
Click to expand...
Click to collapse
No need to enable camera2api or.make changes in build prop . That is required only if you using official miui . Custom roms comes by default with camera2api .
Few things don't work ?
Well.except slow motion and some artistic pictures with front cam ? all is fine ...
I am currently on v11 -N build ..didn't tried the beta builds ...
Boomshiva said:
No need to enable camera2api or.make changes in build prop . That is required only if you using official miui . Custom roms comes by default with camera2api .
Few things don't work ?
Well.except slow motion and some artistic pictures with front cam ? all is fine ...
I am currently on v11 -N build ..didn't tried the beta builds ...
Click to expand...
Click to collapse
Which settings do you use?
manuelbvb said:
Which settings do you use?
Click to expand...
Click to collapse
This ?
This MOD is now Discontinued support for Oreo 5.02+ FW, please move your attention to @CrashOverride1995 post HERE
----------------
I originally found this mod from op5 thread by @pankajsammal post, and also few simular threat from other different oneplus device, but @pankajsammal post offers magisk module, so here I am sharing this beauty after a little cook myself for op5t.
Feature:
HEVC/H265 codec enable at Original OP5T bit-rate for all video and audio on Stock OOS camera app and GCam ported
4K 42Mbps
1080p 20Mbps
etc.
BUG:
**Incompatible with Viper4Android* Magisk module
@pankajsammal Original post link: HERE
ALL credit goes to @pankajsammal !!
Use it on your OWN RISK!!
changelog
update v2.1.1 @jkyoho
Original Bit-rate for op5t, tested on OOS4.7.6 stock camera app
-------------
Update V2.1- via @pankajsammal
Fix for slow motion crashing on modded google camera
The big "Use it on your OWN RISK!!" really does not want to make me try it.
How to install it ? from scratch please.
Can the phone read the video with the stock player ?
Tried it on ob1. Very nice. No crash. 4K=29sec=156mb. Zoom to focus works too. Stock cam v2.5.2 thank you
DoKaTSuYa said:
The big "Use it on your OWN RISK!!" really does not want to make me try it.
How to install it ? from scratch please.
Can the phone read the video with the stock player ?
Click to expand...
Click to collapse
you need a working Magisk on your phone
Easiest way: add this module from Magisk module "+" icon and locate the zip you downloaded.
And yes, stock galary player or any player should be able to playback since your 835 processor can do hevc work
I don't think it's works on OB1
dariett said:
I don't think it's works on OB1
Click to expand...
Click to collapse
Can you post screenshot Magisk Module and log?
jkyoho said:
Can you post screenshot Magisk Module and log?
Click to expand...
Click to collapse
Attached the screenshot of magisk... How I can save a log?
dariett said:
Attached the screenshot of magisk... How I can save a log?
Click to expand...
Click to collapse
Go to log section and pick Magisk and then top right save button
Thanks a lot
dariett said:
Thanks a lot
Click to expand...
Click to collapse
I just checked you log. Viper4AndroitFX also modified medoa_profiles.xml and other config of vedio setting. That's why it doesn't work for you
jkyoho said:
I just checked you log. Viper4AndroitFX also modified medoa_profiles.xml and other config of vedio setting. That's why it doesn't work for you
Click to expand...
Click to collapse
Ok thanks a lot I will try another version of V4A
jkyoho said:
I just checked you log. Viper4AndroitFX also modified medoa_profiles.xml and other config of vedio setting. That's why it doesn't work for you
Click to expand...
Click to collapse
Any way to revert this? I also have ViPER4Android installed and this Module don't work any More. I tried to installed ViPER4Android but the Problem is there
deves000 said:
Any way to revert this? I also have ViPER4Android installed and this Module don't work any More. I tried to installed ViPER4Android but the Problem is there
Click to expand...
Click to collapse
TRY UNINSTALL V4A old version and use v2.9 fron magisk module download.
I just did quick test from V4A magisk v2.9 . seems no effects on my hevc module ,but I am on Nogats not Oreo
OK i ll try and let you Know
Not work on Beta 2.
With witch app can I open log file to see if supported H265?
Sent from my iPad using Tapatalk Pro
paatha13 said:
With witch app can I open log file to see if supported H265?
Sent from my iPad using Tapatalk Pro
Click to expand...
Click to collapse
view video file property/info from VLC player or any player(stock player does not show detail )
NCC_1701 said:
Not work on Beta 2.
Click to expand...
Click to collapse
please upload your ORIGINAL /system/etc/media_profiles.xml from OB2 for comparison.
Also provide your magisk module screenshot and magisk system log for troubleshot
I'm running Dirty Unicorns RC - 8.1, which is AOSP.
This was working fine with OOS OB1.
This isn't currently working with 8.1 custom AOSP ROM. I'm not sure if there's a way to get it to work.
I've linked the requested xml file if it helps. I tried attaching but file wouldn't upload to post.
https://mega.nz/#!QPJmwKQI!SWBGwAdAp12uc6wzTp5gCofEdpQaLvAQu-_CvQZm21U
Hi, i've installed the last update of Lineage OS (8.1), but the camera app is too bad. I tried with some porting of Google Camera etc, but most of them crash for different reasons and I did't find a good solution.
Is there a camera app, or a zip mod that I can install by recovery, to get a better shot (or at least, like the stock app of the Samsung Experience)?
i'm using gcam mod from this thread : https://forum.xda-developers.com/showthread.php?p=77595226
Sent from my SM-G935F using Tapatalk
dhio.sc said:
i'm using gcam mod from this thread : https://forum.xda-developers.com/showthread.php?p=77595226
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Which version do you use? the last one?
Storm937 said:
Which version do you use? the last one?
Click to expand...
Click to collapse
I'm using : GCam_5.1.018.177470874.41362666_N6_1.8.apk (IDan, 2018-09-12, exynos, changelog)
so far have no problem with regular photos (just potrait photos/selfie), without any changes on option.
Sent from my SM-G935F using Tapatalk
dhio.sc said:
I'm using : GCam_5.1.018.177470874.41362666_N6_1.8.apk (IDan, 2018-09-12, exynos, changelog)
so far have no problem with regular photos (just potrait photos/selfie), without any changes on option.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
there's no portrait mode in this version :/
edit: not true, lol, is there
I use this version from miniuser:
https://drive.google.com/file/d/1xH3yLwrt5ZIkcTqGg-xxepHHMd5W8YfF/view?usp=sharing
Works great for me. Make sure the gcam is set to Nexus 6 Hdr+ auto ( settings-> advanced-> config camera hdr+).
For video recording you will have to select camcorder.h265 in developer settings (settings -> developer settings)
Here is a pdf from IDan with info about the gcam:
https://drive.google.com/file/d/13AmdLB0E3z-e7ZFhFnm97-LYgc_63cCC/view?usp=sharing
BarryPooter said:
I use this version from miniuser:
https://drive.google.com/file/d/1xH3yLwrt5ZIkcTqGg-xxepHHMd5W8YfF/view?usp=sharing
Works great for me. Make sure the gcam is set to Nexus 6 Hdr+ auto ( settings-> advanced-> config camera hdr+).
For video recording you will have to select camcorder.h265 in developer settings (settings -> developer settings)
Here is a pdf from IDan with info about the gcam:
https://drive.google.com/file/d/13AmdLB0E3z-e7ZFhFnm97-LYgc_63cCC/view?usp=sharing
Click to expand...
Click to collapse
When I tap on switch camera, the app crashes. is there a fix?
Can't seem to find one that will open
Hi
I yesterday installed lineage 15.1 on my s7 Edge.. What a fantastic rom. It feels so much faster and smoother to me than stock oreo.
I have installed it with no gapps and have rooted . I wanted to use Google camera as a replacement but every one I have tried force closes immediately (must have tried 20 or more based on recommendations here, in reddit and elsewhere).
Any suggestions on how to get this working? What puzzles me is that others seem to have it working. Maybe because I haven't flashed gapps?
Thanks in advance
Whatsapp and Instagram camera issue - bad quality
Semi OT: is there a fix for the bad processing and quality of the Whatsapp and Instagram (specially with the Stories) camera?
With android oreo you need to have the "google service framework" apk installed for google apps. You can install the attached app or you can search for it on apkmirror. After installation you can freeze the app with titanium backup.
Boo222444666 said:
Hi
I yesterday installed lineage 15.1 on my s7 Edge.. What a fantastic rom. It feels so much faster and smoother to me than stock oreo.
I have installed it with no gapps and have rooted . I wanted to use Google camera as a replacement but every one I have tried force closes immediately (must have tried 20 or more based on recommendations here, in reddit and elsewhere).
Any suggestions on how to get this working? What puzzles me is that others seem to have it working. Maybe because I haven't flashed gapps?
Thanks in advance
Click to expand...
Click to collapse
Storm937 said:
Semi OT: is there a fix for the bad processing and quality of the Whatsapp and Instagram (specially with the Stories) camera?
Click to expand...
Click to collapse
I think not, as of for now, but the dev had already found the problem and made some improvement, but still in progress, hopefully in the next LOS update there will be good news for camera.
-update-
The update for LOS is done already, you might wanna try do dirty flash over existing build. and update here for the result (i can't update right now).
Sent from my SM-G935F using Tapatalk
Use this Mod, everything is working, including lens blur, portrait and slowmo:
https://forum.xda-developers.com/ga...eras-ports-t3778837/post77512040#post77512040
How's the battery life compared to stock?
No updates?
Which version gcam will work on Lineage 16? (I have a black screen or FC with links here)
patsonator said:
How's the battery life compared to stock?
Click to expand...
Click to collapse
I wouldn't say that there is a very big difference. ( 30+ minutes on lineage)
BatZzn said:
Use this Mod, everything is working, including lens blur, portrait and slowmo:
https://forum.xda-developers.com/ga...eras-ports-t3778837/post77512040#post77512040
Click to expand...
Click to collapse
It is discountinued
Boo222444666 said:
Hi
I yesterday installed lineage 15.1 on my s7 Edge.. What a fantastic rom. It feels so much faster and smoother to me than stock oreo.
I have installed it with no gapps and have rooted . I wanted to use Google camera as a replacement but every one I have tried force closes immediately (must have tried 20 or more based on recommendations here, in reddit and elsewhere).
Any suggestions on how to get this working? What puzzles me is that others seem to have it working. Maybe because I haven't flashed gapps?
Thanks in advance
Click to expand...
Click to collapse
I don't think that's the problem, I flashed gapps and there isn't any camera app in app drawer. So, I am not able to use camera app and flashlight.
I decided to start this thread because all the other GCAM port threads aren't up to date ,specially with the increasing number of APKS
so,let's get started
Disclamer
The Camera2api port for our device is buggy as hell not only that but the dual pixel technology libraries are f**** by OnePlus so to overcome that and get both portrait mode working and front camera hdr+
you must be rooted(or at least have a custom recovery)
for non root you can still use HDR+ only for the back camera with lots of dots!
Downloads
A-rooted downloads 1-the lib fix FOR ANDROID 8.1 ONLY
FOR ANDROID 9 PIE OOS 9.0.6 and above
2-Pixel Colours(optional)For OOS 9.0.6 and above you need Pixel Colours v3.0 HERE
B-APK download that's a bit easy
1-New Best Version Urnyx based on GCam 6.2 is excellent thanks Urnyx Download latest here
2-Gcam based on 5.1 Urnyx05 v6.2 for any OS for the 5t oreo and up of course
Settings
-For Gcam based on 5.1 only This one contains the settings I personally use with the current Google camera version Urnyx05 6.2 to get best results after testing many times(you can find yourself better settings anyways).
-the settings are attached as images in the post feel free to test them out.
Thanks, been looking for something like this an updated one. Using Urnyx and thanks for the settings
5star02707 said:
Thanks, been looking for something like this an updated one. Using Urnyx and thanks for the settings
Click to expand...
Click to collapse
You're Welcome
Lib fix breaks any audio mod like v4a, ainur, Dolby...
If you have audio mods and lib fix installed, any audio mod will not work and camera will not work in any app including stock camera app
You have to choose between camera or audio
SUPER KOKA said:
Lib fix breaks any audio mod like v4a, ainur, Dolby...
If you have audio mods and lib fix installed, any audio mod will not work and camera will not work in any app including stock camera app
You have to choose between camera or audio
Click to expand...
Click to collapse
use a custom kernel
and set it to permissive using a magisk module
or any other app
AlMaghraby said:
use a custom kernel
and set it to permissive using a magisk module
or any other app
Click to expand...
Click to collapse
I'm just warning the others before they come complaining about that :good:
SUPER KOKA said:
I'm just warning the others before they come complaining about that :good:
Click to expand...
Click to collapse
You can get both with permissive kernel
Works on OB20?
Ritwik Rahman said:
Works on OB20?
Click to expand...
Click to collapse
stated in the OP you need magisk to get it fully working
SUPER KOKA said:
Lib fix breaks any audio mod like v4a, ainur, Dolby...
If you have audio mods and lib fix installed, any audio mod will not work and camera will not work in any app including stock camera app
You have to choose between camera or audio
Click to expand...
Click to collapse
In my case, using the Lib Fix in the link, doesn't break the stock camera (didn't try any audio mod). But if I update the module from magisk (to the last version), that one is breaking the stock camera.
I am using blu spark kernel. What does it mean to set it to permissive and how do I do that? Any side effects (potentially unwanted) by doing that?
derei said:
In my case, using the Lib Fix in the link, doesn't break the stock camera (didn't try any audio mod). But if I update the module from magisk (to the last version), that one is breaking the stock camera.
I am using blu spark kernel. What does it mean to set it to permissive and how do I do that? Any side effects (potentially unwanted) by doing that?
Click to expand...
Click to collapse
kernel is either enforcing or permissive
hence the name suggests
permissive 'permits' apps from overriding system policies
enforcing enforces system policies
so use permissive when you have an app that requires it only
It theoritically impacts security
specially if you don't know what apps to install or don't get them from a trusted source
Do you know if they have a chance that the app damage my phone ? (OnePlus 5T Android 8.1 OxygenOs 5.1.7)
Supsyne said:
Do you know if they have a chance that the app damage my phone ? (OnePlus 5T Android 8.1 OxygenOs 5.1.7)
Click to expand...
Click to collapse
no damage don't worry
follow the guide and settings
AlMaghraby said:
no damage don't worry
follow the guide and settings
Click to expand...
Click to collapse
Thanks
AlMaghraby said:
I decided to start this thread because all the other GCAM port threads aren't up to date ,specially with the increasing number of APKS
so,let's get started
Disclamer
The Camera2api port for our device is buggy as hell so to overcome that and get both portrait mode working and front camera hdr+
you must be rooted(or at least have a custom recovery)
for non root you can still use HDR+ only for the back camera with lots of dots!
Downloads
A-rooted downloads 1-the lib fix FOR ANDROID 8.1 ONLY
FOR ANDROID 9 PIE OPEN BETA ONLY
2-Pixel Colours(optional) OREO ONLY I did not test on PIE(you can test yourself and report back
B-APK download that's a bit easy
1-by far the most stable is Urnyx05 v6.2 for any OS for the 5t oreo and up of course
2-latest apk based on the new pixel 3 camera with night sight (but still has issues like green tint) you can find it HERE
3-Arnova's latest HERE
Settings
-This one contains the settings I personally use with the current Google camera version Urnyx05 6.2 to get best results after testing many times(you can find yourself better settings anyways).
-the settings are attached as images in the post feel free to test them out.
Click to expand...
Click to collapse
Urnxy05 v6.2 is giving pinkish tint?? Do I need root for that??
rubai018 said:
Urnxy05 v6.2 is giving pinkish tint?? Do I need root for that??
Click to expand...
Click to collapse
try to remove pink tint from all cameras
settings/advanced/fixes
Hi all. Firstly, this camera is great. Using it on lineage with microg and using your suggested settings and am having no problems.
The only issue I see is that in lower light I experience lag when in portrait mode. Anyone know a solution to this?
adamokari said:
Hi all. Firstly, this camera is great. Using it on lineage with microg and using your suggested settings and am having no problems.
The only issue I see is that in lower light I experience lag when in portrait mode. Anyone know a solution to this?
Click to expand...
Click to collapse
less light = slower shutter
it is slower to get a decent image quality
and I don't think it's that slow
anyway there is no fix to that at least without affecting image quality
When I take photo I obtain something purple
Supsyne said:
When I take photo I obtain something purple
Click to expand...
Click to collapse
because you are not rooted and did not install the fix
use Urnyx05 v6.2 and in fixes enable remove pink from all cameras
After testing a few ROM's on this forum I find that there is always an issue with the camera app.
Right now I'd like to stick with the PixelExperience or OmniTreskmod ROM, but the OOS camera crashes when I try to use slow-motion, and the GCAM apk also crashes frequently. (I've tried the latest December version and also an older version)
Are these features not available for custom ROM's? Should I just modify stock OOS with magisk modules to make it look/feel like a Pixel?
Edit: Does the OOS camera needs the OnePlus gallery to function correctly?
I have no issue with the latest gcam or included oos cam in AOSP extended
GCam works well, you just have to load a good XML
fuarkgl3 said:
GCam works well, you just have to load a good XML
Click to expand...
Click to collapse
I cant find any information on xda about loading an XML file. Where can I find this XML file for the OnePlus6?
fireguy0306 said:
I have no issue with the latest gcam or included oos cam in AOSP extended
Click to expand...
Click to collapse
So does your slowmotion video work? TreskMod had an oxygenOSCam.zip file, maybe it's just out of date. I'll search the forum for a different OOScam
have u find something out there??
klym.software said:
So does your slowmotion video work? TreskMod had an oxygenOSCam.zip file, maybe it's just out of date. I'll search the forum for a different OOScam
Click to expand...
Click to collapse
pekas said:
have u find something out there??
Click to expand...
Click to collapse
I've moved to the OnePlus7Pro and it has the exact same issue. From what I've seen you cannot use a custom ROM on a OnePlus device and have a fully functional OOS camera app. This is sadly why I'm moving away from using custom ROMs.
thats too sad, cause getting a new version phone is caused mostly you wanna have a great camera too, isnt?
otherwise, why to buy a such a expensive phone when the quality of the pictures is like some years ago??
klym.software said:
I've moved to the OnePlus7Pro and it has the exact same issue. From what I've seen you cannot use a custom ROM on a OnePlus device and have a fully functional OOS camera app. This is sadly why I'm moving away from using custom ROMs.
Click to expand...
Click to collapse