Related
This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot
Thanks to everyone in this thread for helping figure this thing out!
Working perfect on liquid smooth rom, thanks for posting this!
Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.
confirm working for d855 on cm11... thanks
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..
Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app
Anyone tested this on CM12 yet?
if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.
Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.
And let us know!
Sent from my LG-D851 using Tapatalk
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.
Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?
rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times
As the title says, this is a flashable OmniSwitch recents management zip for 5.1.x ROMs. All credit goes to @maxwen for creating OmniSwitch and @czboyshubham for creating this zip originally for 5.0. I simply updated it for 5.1.x so it functions properly on updated ROMs. I did this for Pure Nexus, but it should work on anything as far as I know - let me know if you run into issues and I will update this post accordingly. czboyshubham's original thread for those who wish to say thanks:
http://forum.xda-developers.com/mot...based-roms-t3079752/post62398131#post62398131
For those of you who need or want to assign a shortcut to open OmniSwitch instead of dragging the handle (or do both like I do), here's a link to the apk "Toggle OmniSwitch" by @kikuto that will allow you to assign it as an app shortcut: http://forum.xda-developers.com/showpost.php?p=54078587&postcount=19
Enjoy navigating with ease!
Updated to include newest OmniSwitch with vertical mode and a few other things as requested by @AndroidSlave
Download:
https://www.androidfilehost.com/?fid=24052804347809052
Thanks for the update!
This is what I am loooking for.
Thank you.
Love it.
@wrongway213 would you be kind enough to update this zip to have the newest omniswitch? There are a few amazing new features like having the program in vertical mode that I would love to have.
AndroidSlave said:
@wrongway213 would you be kind enough to update this zip to have the newest omniswitch? There are a few amazing new features like having the program in vertical mode that I would love to have.
Click to expand...
Click to collapse
Sure thing. I'll get it done sometime today and update the OP with a new flashable zip. Thanks for the heads up they added new features - been busy lately and have not been tracking Omni's git.
Can this be flashed on 4.4.2 miui Rom. I like omniswitch
wrongway213 said:
Sure thing. I'll get it done sometime today and update the OP with a new flashable zip. Thanks for the heads up they added new features - been busy lately and have not been tracking Omni's git.
Click to expand...
Click to collapse
Yeah the vertical feature is awesome. It makes it similar layout to slim recents (but much better IMO)
AndroidSlave said:
Yeah the vertical feature is awesome. It makes it similar layout to slim recents (but much better IMO)
Click to expand...
Click to collapse
I've been messing with this for like 2 hours and no matter how I package the zip it will absolutely not open OmniSwitch outside of "restricted mode" no matter what I do. This is apparently going to be more difficult than I thought, but I'm still working on getting the permissions working so we can upgrade.. will update the thread as soon as I get it working. The new layout is nice, but I don't think we want restricted mode.. need to get to the bottom of this.
xcoded said:
Can this be flashed on 4.4.2 miui Rom. I like omniswitch
Click to expand...
Click to collapse
Thread for 4.4: http://forum.xda-developers.com/showthread.php?t=2700039
wrongway213 said:
I've been messing with this for like 2 hours and no matter how I package the zip it will absolutely not open OmniSwitch outside of "restricted mode" no matter what I do. This is apparently going to be more difficult than I thought, but I'm still working on getting the permissions working so we can upgrade.. will update the thread as soon as I get it working. The new layout is nice, but I don't think we want restricted mode.. need to get to the bottom of this.[/url]
Click to expand...
Click to collapse
Same issue I was having. I read somewhere that you can use XxX to fix that issue, but I couldn't figure that out either.
Post edited: I didn't realize that program wasn't allowed to be mentioned here.
AndroidSlave said:
Same issue I was having. I read somewhere that you can use lucky patcher to fix that issue, but I couldn't figure that out either.
Click to expand...
Click to collapse
Thread updated with new OmniSwitch with vertical mode and all the goodies, full permissions. Link in OP. Enjoy everyone!
wrongway213 said:
Thread updated with new OmniSwitch with vertical mode and all the goodies, full permissions. Link in OP. Enjoy everyone!
Click to expand...
Click to collapse
Working great. Thanks again buddy.
AndroidSlave said:
Working great. Thanks again buddy.
Click to expand...
Click to collapse
Awesome, glad it's running great for you too. What device/ROM you have it running on? Curious if it is working across the board, works great on Pure Nexus for N6 but haven't tested anything else myself. Anyone who uses this, feel free to leave device/ROM info if it works or doesn't - I hope this is compatible with anything, it should be the way perms are set but I am not really sure so confirmation would be cool.
wrongway213 said:
Awesome, glad it's running great for you too. What device/ROM you have it running on? Curious if it is working across the board, works great on Pure Nexus for N6 but haven't tested anything else myself. Anyone who uses this, feel free to leave device/ROM info if it works or doesn't - I hope this is compatible with anything, it should be the way perms are set but I am not really sure so confirmation would be cool.
Click to expand...
Click to collapse
Also on Pure Nexus on N6. Really no reason it shouldn't universally work though.
Thanks wrongway213, running perfectly - with the toggle apk - on my Xiami Xi3 with 5.1.1 with the EOS AOSP ROM. :good:
Thanks for this. Working on my Oneplus One. The kill app button doesn't seem to work though. I'm not able to swipe apps away either.
nightfireblaze8 said:
Thanks for this. Working on my Oneplus One. The kill app button doesn't seem to work though. I'm not able to swipe apps away either.
Click to expand...
Click to collapse
What ROM/kernel are you running? Does it give you a "restricted mode" notification when you first boot? I was having these issues for the first 20 or so times I tried to package this, but the release I finally put out works outside of restricted mode on my Nexus 6. My kernel is set to permissive as well, if that matters any - definitely curious to see what causes the incompatibility.
wrongway213 said:
What ROM/kernel are you running? Does it give you a "restricted mode" notification when you first boot? I was having these issues for the first 20 or so times I tried to package this, but the release I finally put out works outside of restricted mode on my Nexus 6. My kernel is set to permissive as well, if that matters any - definitely curious to see what causes the incompatibility.
Click to expand...
Click to collapse
I'm using AK kernel with Cyanogen OS 12.1. Yes, I did get the restricted mode notification. I'll try reflashing it after going back to the stock kernel soon.
Thanks.
nightfireblaze8 said:
I'm using AK kernel with Cyanogen OS 12.1. Yes, I did get the restricted mode notification. I'll try reflashing it after going back to the stock kernel soon.
Thanks.
Click to expand...
Click to collapse
I doubt AK kernel is the issue. I'm curious if it's a device issue, or more likely that this does not work on stock firmware, only custom ROMs. If anyone has this up and running on the One Plus One, or if anyone has this running on stock, please let me know. My guess is that this will only work on stock AOSP or custom ROMs, but that is just a guess at this point - hoping to get confirmation as more people download and flash. Thanks for reporting, I'll see what I can do once I get more information from other users across devices (hopefully).
Just wanted to let everyone know - this works for M ROMs, at least for Pure Nexus Marshmallow. Enjoy spicing up your M ROMs until features get added, thought I'd have to wait on Omni M
Hey guys,
New to the OnePlus 3 scene but been around for a while. Made a little mod to add pixel navbar and animation to this phone. Have been wanting something like this since I got it and haven't seen anyone post it for OOS so here we go!
As always, you do this mod at your own risk so make sure you backup your rom. Also, I have only tried this on FreedomOS so please tell me if it works on others (it should since I didn't see any mods that messed with the systemUI) This works with stable builds, beta is missing some new qs tiles.
Back up your ROM first!!!
Hope you guys enjoy it like I do!
Thanks man. Been looking for this forever as well. Works like a charm on experience os v17.
Cool.
Could you also make a revert zip?
Sent from my OnePlus 3 using XDA Labs
joaoennes said:
Cool.
Could you also make a revert zip?
Click to expand...
Click to collapse
Yeah, at work right now so I won't be able to for a while. You could also just flash your ROM.
Been searching for long man,at last!
Flashed this on Experience v18 based on OB13.
Everything works except I lost the new Data Network speed introduced in OB13.
I guess this happened because this MOD is based on old system UI (<OB13)
Can you please update it?
Nice thanks!
Hey man amazing work! Could you also port it to Lineage ROMs? If that's not too much trouble! Thanks!:laugh:
I kind of need that revert zip
oliake said:
I kind of need that revert zip
Click to expand...
Click to collapse
Just reflash your Rom again
Sent from my OnePlus 3 using XDA Labs
oliake said:
I kind of need that revert zip
Click to expand...
Click to collapse
First post says to make a backup.
Either reflash your ROM or restore backup. I haven't had time to get back to this. Work has me flooded and I don't even have time to mess with my OP3T. Also replaced my laptop with a surface book and haven't set it up with the proper environment nor does it run Linux well yet.
Dear OP, Can you please make this mod for OB14 also since the SystemUI crashes when we use the swipe down gesture in it
Thank you
Nice work,and can you update it for oos 14? Thanks!
jassycliq said:
First post says to make a backup.
Either reflash your ROM or restore backup. I haven't had time to get back to this. Work has me flooded and I don't even have time to mess with my OP3T. Also replaced my laptop with a surface book and haven't set it up with the proper environment nor does it run Linux well yet.
Click to expand...
Click to collapse
Yeah sorry it wasn't meant to sound like a bad comment or so. I love the animation and everything on the nav bar. It's just that something weird happens to my OP3 when you install it, some other animations on the phone disappears.. Like the new charging animation and so. But thank you for the mod, always appreciated!
Awesome mod, but could you please update it to the latest OOS?
It would be really nice of you could update this to work with the latest OOS 4.1.3 OP, it's a really awesome mod!
Does this work for lineage os ??
Adridge2456 said:
Does this work for lineage os ??
Click to expand...
Click to collapse
No, OOS only
Sent from my OnePlus 3 using XDA Labs
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Video recording (working but laggy if you want to watch it)
SELinux
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Changelog
Code:
[B]lineage-15.1-20180722-UNOFFICIAL-eagle.zip[/B]
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180707-UNOFFICIAL-eagle.zip[/B]
Fix low volume
Fix livedisplay
Fix kernel local version
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180624-UNOFFICIAL-eagle.zip[/B]
Initial release
Troubleshooting
Video recording
Video recording is broken in stock camera, just install
https://play.google.com/store/apps/details?id=com.simplemobiletools.camera
as workaround for now.
Playstore show not certified
Try to clean app data and cache first, if its not working for any reason read this
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Low RAM Configuration
Add the four lines into your build.prop with any rootexplorer you want, save it and restart your phone to activate them.
Code:
# Low memory device
ro.config.low_ram=true
# Force high-end graphics in low ram mode
persist.sys.force_highendgfx=true
If you need more information read this
https://source.android.com/devices/tech/perf/low-ram#intro
sgspluss said:
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Information
This are unofficial builds made by myself, will fix things, resync and rebuild it if i'll find some free time.
What's working
Mostly everything.
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Click to expand...
Click to collapse
did you fix some problems in this version?
i mean is there any different from the rom BETA 2?
and what abut laging? did you fix it?
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
sgspluss said:
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
Click to expand...
Click to collapse
great news..iam ready for start testing..i will report if i found somthing
hooooossamq said:
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.
Click to expand...
Click to collapse
snap is better because it uses newer drivers and open source (like the rom itself). and there is no point if you add sony camera because it is an AOSP rom, it meant to be pure android (except lineage tweaks)
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
hooooossamq said:
what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
Click to expand...
Click to collapse
Thats not that easy as you think, because need to port this app to the api, but apart of this i want to stay close as possible to lineage.
hooooossamq said:
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
Click to expand...
Click to collapse
Afaik there will be no odex files, if there are one i will change it in next update. To be honest, did not check it.
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Hrustus said:
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
Click to expand...
Click to collapse
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
hooooossamq said:
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Click to expand...
Click to collapse
Are they also present in builds befor?
Sent from my athene using XDA Labs
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Click to expand...
Click to collapse
Unfortunately no, but maybe somebody else remember version. Hmmm... Actually I am not sure that Magisc was working on LineageOS or on Ressurection ROM...
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Are they also present in builds befor?
Sent from my athene using XDA Labs
Click to expand...
Click to collapse
the lag is much more in your bulid..light bar was working in BEAT 2.
style day and night bug was present in BETA 2..
i was test ALPHA 4 before.every thing working of the bug i say before expact the light bar.and its the most smoth version.. its lagy.. but most smother than all
About problem with magisk, we are also unable to install the magisk manager will look into it whats the reason.
About lags and bugs its strange because i am using same sources, as you can read.
If Something not working logs are helpfull otherwise it takes more time to figure out whats wrong.
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Sent from my athene using XDA Labs
sgspluss said:
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Click to expand...
Click to collapse
and here goes my report (very early report, i will add more information)
1-) without gapps, there is some frame dropping in animations and recent apps section (with or without android go mode) but it is same as beta 2, but a bit slower than 8.0 versions. i wonder is there a huge change under the hood between two versions
2-) no lag present in bootanimation, that's unexpected
3-) front camera video works
4-) dark mode works just fine
summary: our device can't handle gapps, that's what i see here. there are minimal frame droppings. also rom is odexed sadly
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Sent from my athene using XDA Labs
sgspluss said:
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Click to expand...
Click to collapse
go optimization is better for our device for sure, but this recent apps lag holds me back. but without go and using microg, rom holds up pretty good actually.
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Sent from my athene using XDA Labs
sgspluss said:
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Click to expand...
Click to collapse
as i said before, i am using rom with low_ram=false, and there is less lag compared to go enabled mode.
hello
Me too "low_ram=false" make my m2 less laggy
Thank you for your work
Night all, looking for someone to test riceDroid on the p7/p7 pro please.
alvin14 said:
Night all, looking for someone to test riceDroid on the p7/p7 pro please.
Click to expand...
Click to collapse
I can test, thanks
I can also test if you are still looking for someone
alvin14 said:
Night all, looking for someone to test riceDroid on the p7/p7 pro please.
Click to expand...
Click to collapse
I will gladly test. I have the P7.
Hit me with a build, I'm a regular tester in private telegram groups for multiple devices, aka, can provide logs or do basically anything you need.
id like to test ricedroid if possible i test em all
I'm down as soon as I get home....this ROM is the reason I decided to get my 1st Pixel, I might as well help
P7P
I can test it, sir
Thanks
@alvin14 do you maybe have a TG channell for the testing purposes?
Pixel 7 here, can test
Panther (P7) here.
Willing and able to test.
Ran your Ricedroid build on P6 before I upgraded. Would love to test for P7 (panther).
I would like to test it please
ok I tested the 2/2 with gapps/pixel build can't restore apps and there's no play store. when setting the wifi connects then it drops after and asks do you want to continue setup or try other network
@alvin14 I noticed you put up another Pixel build? where do you want me to send the logs to?
going to flash in a little bit
@jhc1
on the latest build the setup manager does not work either and there is no playstore available
b0uNz said:
@jhc1
on the latest build the setup manager does not work either and there is no playstore available
Click to expand...
Click to collapse
is there face unlock @b0uNz? if so I'm gonna try the aosp build and flash gapps
b0uNz said:
@jhc1
on the latest build the setup manager does not work either and there is no playstore available
Click to expand...
Click to collapse
jhc1 said:
is there face unlock @b0uNz? if so I'm gonna try the aosp build and flash gapps
Click to expand...
Click to collapse
No face unlock(it did pop up as a notification though, I didn't check it with the Pixel build), but flashing AOSP build and then flashing MindTheGApps, this one here, will get you the Play Store.
I'm going to run the build for tomorrow and see how it holds up. Going through the settings, so far what I've noticed, is that the system icon packs doesn't apply for theming. Other than that, everything else seems to be holding up for the past couple hours that I've been on it.
@alvin14 Any chance you have a TG group up for Pantah?
I also have the AOSP version running for a few days. No faceunlock but you can use UniversalAuth FaceUnlock from this thread https://forum.xda-developers.com/t/11-universalauth-face-unlock-for-all-roms.4419343/ works fine for me. I use NikGapps Basic, everything works so far except Android Auto.
Curiousn00b said:
No face unlock(it did pop up as a notification though, I didn't check it with the Pixel build), but flashing AOSP build and then flashing MindTheGApps, this one here, will get you the Play Store.
Click to expand...
Click to collapse
Android Auto works with these gapps, thank you