i rencetly bought the htc touch pro but when i connect trough usb on pc the pc does not reconize. it's not showing nothing on phone i try severel usb's and diferent pc's with diferent operating system. the phone charges but it not recognize. i only can syncronize trouhg bluetooh.
i did all the step's i find in the forum and in the internet. and i'm getting the same results.
Please anyone can help me ???? tnks.
Sory for my english.
Are you running stock or a custom ROM? I haven't had that issue(yet) but I am trying to help troubleshoot.
viBranZeOS-2.0-WWE this is the rom that i'm using. and i try alredy 2 other roms, and its the same.
I honestly have no idea what the issue is nor a fix/work-around. However, what I am attempting to deduce is if you had a stock ROM I wouldn't be of much assistance because I only run the ROM in my sig/signature, which is a custom ROM. Now, I'm not 100% on if your ROM has this option but I know the ROM in my sig has an option to change the behavior of the USB connection, from mass storage to active sync. What I am attempting to figure out is if one of those modes has been enabled and the registry is just not accepting or if the usb port is stuck on only charging. I have no clue on how you would find out as I've never heard of that ROM. By the way, what version of TP do you have, GSM or CDMA and is it a RAPH100, RAPH110 or what ever is showing above the imei behind the battery. You should see a bar code and just above that are four (4) letters followed by three (3) numbers. Let us know what you have and maybe someone else can chime in.
EnergyROM 29018 w/CHT2.0&.sencity this is your rom ??? i can give it a try. how can i see if is GSM or CDMA ???? my phone is RAPH100.
tnks in advance.
p.s i'v had the phone charging for 2 hours and it's only 2 risks. :s
Clarification: It's not my ROM but it is a ROM that I use most often. GSM/CDMA depends on your carrier/service provider. Looks like you may have a GSM device but I'm not a 100%.
Additionally, what happens when you turn off(shut down your phone completely) and charge?
well i'm using vodafone. and the phone is unlock from factory. it was that the guy told me. i am giving a try with that rom. whit the phone shut down and usb turn on the home buton stay's whit the light. i'n the 3 color screen when i conect the usb it's allways saying serial and don't change to usb.
Not exactly sure that is what I am asking. So do this for me: remove the battery, then put it back in and without turning on the device, plug in your phone to a charger(not USB cable) and tell me if you see an LED circle around the center button slowly light up and then disappear.
yes is that what it happens. and it happens this to with the usb plug in. whit the phone on or off.
So let me guess here, does it still take forever to charge from 30% and still get hot when the device is completely off and plugged in. If so, it still seems like it could be a battery issue to me. I don't know how to confirm if it is the device or the battery but I'd start there if you haven't already.
Additionally, if you are getting to the multicolor screen, then connecting the device to your computer and not seeing the change from Serial to USB and you've already tried changing the USB port, USB cable and computer then it is possible that your device's USB port is somehow broken(for the lack of a better word).
"if you are getting to the multicolor screen, then connecting the device to your computer and not seeing the change from Serial to USB and you've already tried changing the USB port, USB cable and computer then it is possible that your device's USB port is somehow broken(for the lack of a better word)."
you are right i go the multicolor screen and not change from serial to usb. but i didn't try in other computers. i will tell you when i try.
Recently we have been getting in stock i997's that are having USB issues connecting to the computer. As always we enable USB debugger and connect to the computer however now the units are going into charge mode a few seconds after connecting to the computer and shutting the device down. Once we disconnect the device from the computer it automatically restarts.
Here is what we have done so far with no luck:
-Enable USB debugging
-Disable USB debugging & enable mass storage
-*#7284# was set to USB=PDA, changed to Modem & back to PDA
-*#9090# Didn't see any relevant options
-Slightly bending the USB port
I don't think it is a hardware issue but a software issue that needs to be configured. Any help would be very much appreciated!!
USB
Get it as stock as you can with software. If the USB still does not connect correctly then it is a hardware issue. There was never a problem in any stock rom with USB connectivity.
Just my thoughts. It may not be the phone but the connection-- Computer, cable, oops,-- or drivers.
I'm facing the same problem !
I too have the same problem very weird tried several time stock have no issue in connection. this issue occur after few days not immediately and no regular pattern so can't say what's going on. right now my phone while put on charge shows charging but when un plug it still have 1% as charge no battery put to charge message shows up, tried with charger, usb to computer.
I also noticed before that charging stops and only come in effect when you pull the battery and plug the cable put the battery it will start the phone automatically and charge start up.
Can't ever put in charge in switch off mode as every time it automatically switch on my phone.
I tried several time these step 1. Go back to stock by heimdall , 2. heimdall kernal flash for red cwm, 3 wipe, format, fix permission 4. flash
couple of days work smoothly then problem reoccurs
Did you try mtp mode like with media player mode
Sent from my SGH-I997 using xda premium
RDomke said:
Get it as stock as you can with software. If the USB still does not connect correctly then it is a hardware issue. There was never a problem in any stock rom with USB connectivity.
Just my thoughts. It may not be the phone but the connection-- Computer, cable, oops,-- or drivers.
Click to expand...
Click to collapse
Thanks RDomke for the reply.
We already flashed UCKD5 with no luck. Would there be anything else we could do? I agree that it may be hardware if stock doesn't work but we have been getting in too many units out of box with this issue. Not saying that it isn't possible to be hardware, just seems like it's something that could be software related.
SOLVED
RDomke said:
Get it as stock as you can with software. If the USB still does not connect correctly then it is a hardware issue. There was never a problem in any stock rom with USB connectivity.
Just my thoughts. It may not be the phone but the connection-- Computer, cable, oops,-- or drivers.
Click to expand...
Click to collapse
RDomke,
Many thanks as we have solved the issue with your advise. The 1st unit we were testing did in fact have a bad usb port. Once properly diagnosed we tested another by flashing it back to stock and then performing a factory reset. Once done issue was solved and worked on many other with same issue.
I have a note 2 I currently use- when I plug the usb in - in windows 7 I get the option to view files etc....
I just bought a used sprint galaxy s5 from my ol ladys sister who had it hooked up at one of those corner wireless shops.
I want to root it but read to make sure your pc recognizes it first- which it does not.
Ive downloaded the latest usb drivers for the phone.
Ive enabled debugging mode.
Ive used the original supplied cord and also tried my note 2 cord.
When I plug it in it recognizes it and detects drivers but the phone does not show up under my computer and I dont get the window popup asking if I want to view files etc.
Getting really frustrated.
Any ideas?
deezdrama said:
I have a note 2 I currently use- when I plug the usb in - in windows 7 I get the option to view files etc....
I just bought a used sprint galaxy s5 from my ol ladys sister who had it hooked up at one of those corner wireless shops.
I want to root it but read to make sure your pc recognizes it first- which it does not.
Ive downloaded the latest usb drivers for the phone.
Ive enabled debugging mode.
Ive used the original supplied cord and also tried my note 2 cord.
When I plug it in it recognizes it and detects drivers but the phone does not show up under my computer and I dont get the window popup asking if I want to view files etc.
Getting really frustrated.
Any ideas?
Click to expand...
Click to collapse
When I plug the s5 into my pc and pull down the notification bar ...it doesnt even show usb connected.
I cant find any usb options other than usb debugging.
I just went through all this same crap with a galaxy mega a buddy had.
I just dont get why there is no "usb connected as" notification and why this is so complicated to connect to pc when my note connects fine
Bad cable? Maybe Bad Drivers? Where did you download them from? Windows is going to try to recognize it as a media device. Ill give you a couple tips
Just because the "popup window" doesnt popup, you probably just have auto play set to recognize it a certain way.
Just copy and paste this into your explorer window:
%windir%\system32\control.exe /name Microsoft.AutoPlay
and then reset it for your phone.
Also.
1. Make sure the cable is actually connecting, like charging the phone, consistantly, not on and off. If it is, then you know thats good, if not, switch the usb drive you have the cable plugged into. USB Ports actually on the motherboard are the ones Ive always had luck with never disconnecting.
2. If you want to root your phone, and you want the adb drivers, Windows wont find those for you.
Thanks for the reply.
I downloaded the drivers straight from the windows usb driver dowload page for my phone from samsung.
Ive uninstalled reboot,installed rebooted.
Ive set usb debugging off/on.
Tried dialling *#0808# which ive read is the code to enable usb but it doest work it just calls the #.
Tried all my moyherboard usb ports
Tried different cable
The original cable charges fine.
This sg5 NEVER has a usb icon when connected to usb... i find that odd.
A samsung mega a buddy had which was also previously hooked up at the same wireless shop that this s5 was..... also has the same exact issue.... no usb icon and not recognised as media by windows and no way to change usb settings.
Its like that wireless shop disabled usb on there phones for some reason.
I had the phone 2 weeks and cant do anything with it untill I can root it.
My note 2 works fine , i get usb icon in notification area,i can switch to media device from there.
On the sg5 theres no usb icon even though it connects fine to the pc as installer
Sent from my SCH-I605 using Tapatalk
Maybe Im misunderstanding you, but when I have my phone plugged into my pc there is no usb icon, its just connected as a media device and shows its charging. Both screenshots are of my phone while its plugged into my computer
When you plug it into your computer can you access the files on the phone through your windows explorer, like in the first screenshot?
Thanks for replying and the screenshots.
When my phone is plugged into the computer it shows the charging status but no "connected as media device" it doesnt show a connected as anything so nothing to touch for options.
The phone does not show up under windows explorer in my computer.
Ive been using galaxy phones since the original galaxy and never had issues like this.
I just dont get it
I'm similar issues...my phone will just time out in the middle of transfers or won't see the phone at all
Both of your issues sound like driver issues. Heres the link from Samsung for Windows for the S5
http://www.samsung.com/us/support/owners/product/SM-G900PZKASPR
To make this issue stranger....
My neighbor came over to borrow juice for her ecig. I noticed she has an s5.
I ask if i can connect it to my computer and as soon as I plug it in with my s5 cable...bam ...connected as media device , touch for usb options.
And my computer brought up the screen to view files.
So i now know its not my pc,drivers, or cables.
I did however notice when I plugged my s5 in.... in the notification area where it would say touch for usb options.
It says "system update"
But i have no sim or service on the phone so it doesnt update.
Could the system update be needed for the usb to work?
How would i even update system ?its nolonger on sprint. I wouldnt want any more over the air updates anyway as im wanted to root so i can save a straight talk apn and probablly flash a custom rom
Yea... this is nuts.
This sprint s5 i got looks and performs like a brand new phone.
But cannot for the life of me get "connected as ......" to show when a usb is plugged in. When i search settings for "pc connection" , "media" , mtp" , usb" etc.....
Theres nothing I can find to enable how to connect when usb is connected.
I dont even know who or where to ask anymore.
Bought this phone weeks ago and cant do anything with it.
My neighbors s5 connects to my pc no problems. So does my note 2.
I just dont know anymore what else to do
i dont see where not having a sim would matter. does the usb port on your phone seem loose or anything? do you have access to another pc to try connecting to that?
ultimately you can get around most things that require needing a usb connection. theres even a wireless adb.
i doubt this will work either, but have you tried seeing if odin will recognize the phone in download mode? (power off the phone and press the power+home+volume down buttons)
also what version of android is on the phone now? if its still on 4.4.2 or 4.4.4 then you might want to look into towelroot, but i think i remember reading thats not working with 5.0
as for rooting, you could try looking for a flashable update.zip , put it on a external sd card, put that in your phone and boot into recovery (power off the phone and press the power+home+volume up buttons) and flash it, then find a custom recovery like clockworkmod or philz touch or something
all in all im 99% sure theres a way to root the phone without having to do anything on a pc, its just a matter of finding a way to do it, and the before choosing a method to tell you to try, i need to know the android version. also im just assuming the model number is SM-G900P, is that right?
Go into your settings and tell me the
Software Version
Model Number
Android Version
and the Baseband Version
once factory reset...usb works fine.
Im now rooted and flashed MOAR
thanks for all who tried to help
Glad you got it figured out
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
No one else has experienced this or is willing to shed some light on this?
When I had that issue with my nexus 7 I switched out the USB cable for a different one. Seems to have improved.
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
Try downgrading to windows 7. Before you connect your phone to the computer install necessary drivers, samsung driver and kies. Use USB 3.0.
SBColasito said:
Try downgrading to windows 7. Before you connect your phone to the computer install necessary drivers, samsung driver and kies. Use USB 3.0.
Click to expand...
Click to collapse
Yeah, I'm definitely not going to downgrade to Win7. That would be 2 Windows versions ago for me. I've installed every driver available, from Samsung's (with and without Kies) to Google's universal Android USB drivers, and none have worked. I've also tried USB 3.0 and 2.0 ports (I have both on my laptop).
wvcadle said:
Yeah, I'm definitely not going to downgrade to Win7. That would be 2 Windows versions ago for me. I've installed every driver available, from Samsung's (with and without Kies) to Google's universal Android USB drivers, and none have worked. I've also tried USB 3.0 and 2.0 ports (I have both on my laptop).
Click to expand...
Click to collapse
Install kies. My computer didnt recognize my phone until I installed kies including every feature on kies.
SBColasito said:
Install kies. My computer didnt recognize my phone until I installed kies including every feature on kies.
Click to expand...
Click to collapse
Are you reading my posts? I stated in both that I've installed Kies and still couldn't get it to stay connected.
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
Hey, did you try connecting other usb devices to your pc to see if they connect? furthermore, you should also try to connect your phone to another pc to check if there is a USB port problem with your PC/Phone
For me the standard USB cable gives this problem, with another cable it works perfectly. So try another cable
Sent from my SM-G920F using XDA Free mobile app
Hi, everybody.
May you help me, please? My S6 SM-G920F, also is not recognised by windows 7. Smart Switch say S6 dont connect in emergency mode. I supose they means "emergency calls only", is that? I had bought the phone locked to O2 but I live in Portugal and I have no valid O2 SIM card. I bought an unlock SRS by TomMobile because I dont knew that needs a USB cable connection. What can I do, please?
Thanks in advance. AS
SBColasito said:
Install kies. My computer didnt recognize my phone until I installed kies including every feature on kies.
Click to expand...
Click to collapse
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
hi dear .you still facing this problem or you been able to resolve this issue... i am facing exactly same problem on s6 edge..... try many thinks but no success...
very slow charging
not connected to computer
not connect with odin in download mode
not connecting on ADB mode
reactivation lock also not removed from phone...
not accepting any code from dial pad
.....................
plz help me if someone have soloution of this.......
iphone and Samsung S6 same issues
Hello wvcadle,
I have the same issue and it is quite frustrating. Did you find a solution? As some additional info for you. My i-phone was doing the same thing on my computer. I thought it was the phone and I upgraded to a Samsung S6. It does the same thing as the I-phone, what you described and it works fine with other PCs. SO must be computer related. My bet is windows and my IT recommend a full wipe and reinstall of windows. We run Windows 7 Professional.
wvcadle said:
Hello all. I have a problem that is not unique, but I cannot for the life of me seem to fix it.
My S6 will not stay connected to my PC so I can transfer files, use Kies, SmartSwitch, or anything. Sometimes I hear the Windows notification that it's plugged in, but even when I do, it goes back and forth between being recognized and not. Most of the time it doesn't even show up in Device Manager.
I'm currently running Windows 10, but it did the same thing on Windows 8.1.
I have downloaded the Samsung USB drivers as well as allowed Kies and SmartSwitch to install them.
Thinking my Windows 10 being upgraded from 8.1 without a full wipe carried over whatever problem was in 8.1, I did a full wipe of my PC and reloaded Windows 10 clean. That also didn't help. Note: when I first installed Windows 10 clean, my PC didn't recognize my phone at all. It just acted like a charger. After I installed the Samsung USB drivers, it started making the 'connecting' and 'disconnecting' sounds. Also, the most I got Windows to recognize my phone was for about 5 seconds, and that was right after turning off USB debugging. But with it on or off, it still won't stay connected.
And yes, I've made sure (when the phone has connected for a second or two) that it was on MTP. But... I've tried the camera mode as well.
This makes it not only impossible to move files easily between my phone and PC, but also to use Odin.
I've read many posts where people have this problem, but everyone just tells them to go download the Samsung USB driver, and after having done so three different ways, I can say it doesn't work for me.
Anyone who could solve this for me... well... I'd be willing to donate a bit of money to the cause of your choosing, including yourself.
Click to expand...
Click to collapse
Most of the basics have been covered. Did you ever try different cables? Or on another computer? Do you have any issue charging the device by cable?
---------- Post added at 07:54 PM ---------- Previous post was at 07:42 PM ----------
fadi81 said:
hi dear .you still facing this problem or you been able to resolve this issue... i am facing exactly same problem on s6 edge..... try many thinks but no success...
very slow charging
not connected to computer
not connect with odin in download mode
not connecting on ADB mode
reactivation lock also not removed from phone...
not accepting any code from dial pad
.....................
plz help me if someone have soloution of this.......
Click to expand...
Click to collapse
Most USB ports only put out about .4 - .5 amps. They will generally charge more slowly
ULTERIOR-kurt said:
Hello wvcadle,
I have the same issue and it is quite frustrating. Did you find a solution? As some additional info for you. My i-phone was doing the same thing on my computer. I thought it was the phone and I upgraded to a Samsung S6. It does the same thing as the I-phone, what you described and it works fine with other PCs. SO must be computer related. My bet is windows and my IT recommend a full wipe and reinstall of windows. We run Windows 7 Professional.
Click to expand...
Click to collapse
there is no solution currently available i sold my cellphone as is. or you can send your phone to samsung service center if its under warrenty because only they can repair or replace phone for you
---------- Post added at 03:20 PM ---------- Previous post was at 03:17 PM ----------
Theodric58 said:
Most of the basics have been covered. Did you ever try different cables? Or on another computer? Do you have any issue charging the device by cable?
---------- Post added at 07:54 PM ---------- Previous post was at 07:42 PM ----------
Most USB ports only put out about .4 - .5 amps. They will generally charge more slowly
Click to expand...
Click to collapse
its not usb port or cable problem... this problem starts when someone trying to root ... & damage efs partition..
Its just Cable problem my friend.
Find and buy a reliable usb cable. You stated all options and fixes but you never been able to speak of your cable
For those whose saying that root and damaged efs will affect your phone connection to your pc, he's wrong . Rooting and corrupted efs partition doesnt have to do with windows driver etc.
Just think out of the box.
If it did not work with your pc. Then switch to other pc with smart switch & samsung usb driver installed.
I prefer installing samsung usb driver and then smart switch.
If it didnt work, try using different cables.
If it didnt work again, use other samsung phone and see if it connects.
And so on ...
Having exactly the same issue...
Started just today (yesterday and previously no problems experienced, phone would just connect & be visible and available for data tfr, no problems). Today, no go. To be clear, it's Galaxy S6 128 gb running Lollipop, which no longer connects for data tfr via USB to laptop running win7 ultimate. It only connects and charges. I have checked for updates for both windows and Android. There are none outstanding. I have downloaded & reinstalled samsung USB drivers on laptop. No change. I have tried 4 different USB cables, 2 new, and the cable supplied with phone. No go. I have tried these cables in all USB ports on laptop. I have tested other devices in all USB ports and connectivity to laptop with other devices is fine. I have tried connecting phone to another PC, same issue (only charging). I have done the developer thing and switched USB debugging on, no change, and off again, rebooted both devices multiple times, all with no change. Yesterday all was good, today - nada. Anyone got any other suggestions?? Wit's end, reached.
It's been said many times already, but I had this problem and it was the original white cord that came with the phone. It would not stay connected to my laptop nor would it stay connected to the charger. It sat there blinking and making the charge cord inserted sound when plugged into the charger/computer. I changed cables and it went away.
I remember picking the phone up one night in bed and forgot the charging cord was attached. I reached the end of the line and it yanked out of my hand and fell to the ground. This is the only thing I can think of that damaged the cord. I was lucky it didn't damage the charge port on the phone. So you could have a screwed up charge port on the phone if you've tried new cords with no avail. I wouldn't encourage it but sometimes the charging fin can be bent back into place to make a better connection....had to do this on a dell tablet.
Also, if you're using lock screen or fingerprint, I believe you have to unlock the phone after connecting to PC to access and transfer stuffs - just a thought.
talroot said:
...So you could have a screwed up charge port on the phone if you've tried new cords with no avail. I wouldn't encourage it but sometimes the charging fin can be bent back into place to make a better connection....had to do this on a dell tablet.
Also, if you're using lock screen or fingerprint, I believe you have to unlock the phone after connecting to PC to access and transfer stuffs - just a thought.
Click to expand...
Click to collapse
Thanks for the input - it's not a lock screen issue - I've tried connecting with screen locked (then unlocking when connected) - and connecting with screen unlocked, and I don't use the fingerprint security option. No changes observed. I have had concerns about the charging fin, but I am always careful connecting and careful with the phone generally - it looks OK and I'm rather loath to start bending it about in case I just f**k it up entirely. At least it still charges OK. Looks like I might have to bite the bullet, wipe it and take it to a Samsung repair centre. At least it's still under first year warranty. Thanks for your time talroot.
Original white cable did not work from day 1. Fast Charging is working fine but USB connection and tethering is a hell. You need a new cable and a good quality, not some cheep stuff.
Samsung really disappointed me because I owned many of their devices and most of them had some small issues, but after this in s6 edge and overheating issue (especially when using Gear VR) I will not by from Samsung anymore.
just for the record....
...my phone started connecting to laptop again. After about 3 weeks of non-connectivity, I connected again to charge and *ding* it was an external USB device once more. Same cable as before. Doesn't make any sense, but there it is. Thank you everyone for your input.