Database Info

[GUIDE]Newbie Guide for How to Root/Flash Recovery/UNBRICK on Canvas A111

Hi good day to all am RJ am going to guide how to ROOT / FLASH RECOVERY in Micro max Canvas A111 jb4.1.2
WARNING: If your Micromax Canvas A111 smartphone gets bricked or gets damaged while following the tutorial given below, we shouldn’t be held responsible. Proceed at your OWN RISK.
I will try to keep this guide up to date. Please let me know if you find something wrong or missing
Content:
1) Introduction
2) How to root
3) How to flash recovery
4) FAQs (ADB, Loki, Download Mode, Go to Recovery etc.)
5) Troubleshooting (unbricking)
1) Introduction:
Micromax Canvas Doodle a111 is a 3G Android smartphone with a 5-inch TFT HD Touchscreen display. The phone is powered with 1.2 GHz Quad-Core Processor and it runs on Android 4.1.2 Jelly bean OS. With 8 mega pixel rear view camera, the phone offers high quality image capturing. If you are looking for a smartphone under 10000 INR with good features, then Micromax Canvas A111 would be the ideal choice!
If you are a user of Micromax Canvas Doodle a111 and would like to gain root access for installing rooted apps or custom ROM’s, then the following tutorial will help you. I have given step by step instructions for rooting A111 smartphone below
2) How to root:
Prerequisites To Root Micromax Canvas A111 Smartphone​1. Take complete backup of your personal data in the Micromax device using appropriate apps. Although the root process won’t affect them, its safe to keep a backup.
2. Remove all the Antivirus applications installed on your smartphone for virus protection since sometimes they will cause trouble while the rooting process is going on.
3. Charge your phone battery and keep its backup level above 80% as the rooting process drains the battery. If you don’t have enough battery backup and your device gets switched off during the rooting, then surely it will get bricked. Avoid it by having a good battery backup.
4. ***Enable USB Debugging mode in your device by following the path: Settings -> Developer Option -> USB Debugging.
5. *** Make sure you have drivers for your phone Download from here http://www.androidrootguide.com/micromax-usb-driver-download-get-drivers-micromax-smartphones
Once you have done all the above mentioned tasks, you can move on to the rooting tutorial given below.
download any one application from bellow links
1. For VROOT :: click here
2. For Root Genius:: click here
Tutorial To Root Micromax Canvas A111
> To get started, download VROOT / Root Genius from bellow link and install it on your computer. Once installed, open the application.
> Now connect your Micromax Canvas A111 smartphone to the computer using the “USB Debugging Mode”. If you have installed the required USB drivers for your phone on the computer, then the VROOT application will automatically detect your smartphone.
> Now just click on the “Root” button shown on the VROOT / Root Genius window and let the rooting process begin. The smartphone will get restarted several times during the process. So, don’t panic. Once the rooting process is finished, the device will reboot for one more time.
> Thats it. Now you have successfully rooted your Micromax Canvas A111 smartphone. If you want to confirm whether you have successfully rooted or not, use the “Root Checker” app. If you encounter any issues while following this rooting tutorial, do let me know via comments.
****** if u not able to understand the above please click on the Link it will more easy http://rjpraveen.blogspot.in/2014/08/how-to-root-micromax-canvas-doodle-a111.html
3) How to flash recovery:
To install ROM’s and Kernels you need a custom recovery already you learned how to ROOT Device from above information now its the time to use unlocked boot loader to your device k lets move through the part
and
to flash recovery no need root access don't bother if u are rooted or unrooted. if you are unrooted then also you can do it i provide both information for rooted and unrooted users
Things needed before flashing:
1. Proper drivers (see section 1)
2. ADB. There are various ways to get it but don't worry about size and installation i marked it small and easy
3. Required Recovery images(TWRP/CWM/STOCK & MIUI) provided link bellow.
4. Basic Knowledge on PC..
NOTE:: I am not responsible for bricked devices.
Download Recovery image files from billow links
CWM Recovery :: Download the img for your device here
TWRP Recovery :: Download the img for your device here
MIUI Recovery :: Download the img for your device here
STOCK Recovery :: Download the img for your device here
This Step for Rooted Users Only
Download Flashify from Google Play here
(before follow this step please ensure that your battery device has more 50% in case of out of battery during this process)​
1) Use Flashify Application:
This program required Root Permission and it free with limited functioned that can install Custom Recovery 3 times a day. If need more please support dev.
2) Make sure you hit “Allow” when Superuser request window pops up when opening the Flashify app.
3) Choose “Recovery image” for recovery images like CWM or TWRP. (You could even flash stock recovery images and unroot btw.)
4) Next, choose the file you want to install by choosing “Choose a file”.
5) Choose one of the Recovery Download CWM or TWRP or OTHER but I recommended TWRP
6) Browse your storage and choose the IMG file you want to flash.
7) Choose “Yup”. That’s it!
if u want to See more Detailed Information with image presentation click here
This Step for Rooted/NON Rooted Users also
>>>> Download ADB Required files from here
if u want to watch video how to install click here
1> Enable USB debugging mode in ur device
for this(go to setting >> developer Options >> tick usb debugging)
2> Switch off your device and start it in ""fast boot"" mode
for this Switch off device after this
Hold (Volume down + Power Button) both at same time it will show canvas logo with top blue LED above sensor
that's it it means that now your device in fast-boot mode
3> Now connect your mobile to PC with the data cable it will automatically install drivers if not install drivers manually download from above section 1
4> Now get back to PC navigate to download folder it contains 2 folders
1.fast boot files and
2.Recovery Images
now copy recovery which one u want from "Recovery Images" folder to "fast boot files" folder
(stock -- default what MMX device provides)
(CWM/TWRP/MIUI Custom recoverys)
then rename the copied file with name "recovery"
5> Now open "fast boot files" folder at this time in keyboard hold "shift button and click right mouse button" at a time with in the folder
(don't select any file first just left click on white space then proceed "shift+right mouse click at a time")
6> with in this choose option "Open Command Window Hear" then type command
command is
Code:
fastboot flash recovery recovery.img
​ now it show to "okay" messages
now type command
command is
Code:
fastboot reboot
​
7> wait until Ur home screen available on device then disconnect from PC that it enjoy recovery
4) FAQs:
1. HOW TO CHECK WHETHER I ROOTED OR NOT ?
A. Don't worry there is a lot of options to check root access on of that is easy Download "Root Checker" from Google Play and follow procedure in app
2. WHEN FOR ROOTING I CONNECT DEVICE NOTHING PROCESSING ?
A. Install drivers Perfectly and check data cable
3. HOW TO ENTER FAST BOOT MODE?
A. Take Look its easy but small confusion is device started in fast boot mode or not when in fastboot mode its just showing blue led and logo and stuck at logo its enough device in fastboot mode
to switch on fastboot mode(Volume down + Power Button)
4. HOW TO ENTER INTO RECOVERY MODE AFTER INSTALL OR CHECK IT?
A. just Switch off device and press (Volume UP + Power Button) wait until it show recovery don't leave keys
5. HOW TO BACK UP EXISTING ROM?
A. just enter into recovery choose backup option that's it it will place folder according to Ur recovery in SD
5) Troubleshooting
a)Unbricking
If you are reading this you have a problem. Your phone has become a brick. But do not despair yet as there are a few ways to unbrick your phone. Let us first determine whether it is a soft brick or a hard one.
**Soft Brick: Basically it means your phone is bootlooping or showing a blank screen but you can still go to recovery/download mode. The easiest way to fix this (and determine if you have a soft vs hard brick) is turn off the phone and then press the volume up button and powerbutton (keeping vol up pressed). If you see recovery no problem flash stock rom
**Hard Brick: If you cannot enter download or recovery mode then you may have a hard-brick. This is not a fun situation to be in but there is a fix that may work. It involves lots of linux commands and is not for newbies but then if you are hard-bricked what have you got to lose.
Here is the guide done by ChinmaySharma to get back if u hard bricked
http://forum.xda-developers.com/showthread.php?t=2901983
For Video Review to Unbrick watch here in this link in you tube https://www.youtube.com/watch?v=35E21Vi_ddE
Enjoy New Tricks Don't put face like this if u got any stuck at any where just ping me ill make u like :fingers-crossed:

Hi I tried to flash one of your ROM and it displayed bricked cant help and when i reboot it stuck with boot image of canvas. can you please help me

hii..thanks for this...but i soft bricked my phone
when i connect my phone to pc to install drivers....it is showing unknown usb device (device descriptor request failed)
please help me out

thanks sir i am doing it right
I was not able to Flash my drive but becz i have taken Fast boot file from another place and recovery file from another place. But you did the right thing everything going right and i am able to install rom in my micromax A111. Thank you so much sir. I appreciate your hard work.

[GUIDE] [ROOT] Alcatel One Touch T' Pop

Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu

May you also upload any stock ROM for OT-4010D ???

Install TWRP & Root Your Symphony i50

Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.

It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please

I need a Symphony i18 twrp or root
Place help us

Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.

[ROOT][CWM] Starmobile Play Boost CWM Recovery Port + Root Files

I've ported Lenovo a1000 cwm recovery to Starmobile Play boost!
link: below
JUST RENAME IT WITH "recovery.img" without quotes!
NOTE: THE CWM RECOVERY IS NOT FULLY PORTED.. (PROBLEMS IN LOGGING) you cant see the progress of
flashing fully but it works!
ROOT GUIDE:
TO ROOT STARMOBILE PLAY BOOST.. FLASH THE SUPERSU ZIP ROOT USING CWM RECOVERY I PROVIDED!
(it works! VERIFIED BY ME)
Link for supersu: below
METHOD FOR FLASHING THE RECOVERY:
MY METHOD IS INVOLVING WIPING DATA.. YOU CAN USE YOUR'E OWN METHOD BUT THIS IS THE METHOD I USE TO FLASH THE RECOVERY TO MY PHONE
INSTALL SPREADTRUM DRIVERS, LINK: below
INSTALLING SPREADTRUM DRIVERS NEEDED DISABLED DRIVER SIGNATURE ENFORCEMENT... LINK FOR DISABLING IT: below
SPREADTRUM UPDATE UTILITY:below
STARMOBILE PLAY BOOST STOCK ROM: below
STEPS FOR FLASHING: INVOLVES DATA WIPING!!!!
STEP 1: INSTALL SPREADTRUM DRIVERS: GUIDE:
STEP 2: EXTRACT THE STOCK ROM (.PAC) FILE AND THE UPGRADE UTILITY IN ONE FOLDER
STEP 3: OPEN THE "UpgradedDownload.exe" PROGRAM
STEP 4: PRESS THE SINGLE COG LOGO (OPEN PACKET FILE) AND LOCATE THE STOCK ROM .PAC TO THE SAME FOLDER
STEP 5: WAIT THE UTILITY TO EXTRACT THE FILES
STEP 6: AFTER THE FILES EXTRACTED, GO TO THE DIRECTORY OF THE UTILITY, YOU WILL SEE "ImageFiles" FOLDER, OPEN IT
STEP 7: YOU WILL SEE A FOLDER THERE NAMED "_DownloadFiles*******", OPEN IT!
STEP 8: ONCE YOU ARE THERE, DELETE THE EXISTING STOCK "recovery.img" THERE AND REPLACE IT WITH THE CWM THAT I PROVIDE "rename it with recovery.img"
STEP 9: GO BACK TO THE UTILITY AND PRESS THE PLAY BUTTON
STEP 10: TO START THE DOWNLOAD PROCESS:
TURN OFF YOUR'E DEVICE
MAKE SURE YOU INSTALLED THE SPREADTRUM DRIVERS CORRECTLY!
REMOVE THE BATTERIES
PUT THE BATTERIES BACK
PRESS VOL UP + POWER BUTTON WHILE PLUGGING THE USB CABLE
IT WILL START THE PROCESS
STEP 11: WAIT THE UTILITY TO STATE "passed" AND YOUR'E GOOD TO GO! "WIPED DATA + CWM RECOVERY INSTALLED!"
EXTRAS: ADB DRIVERS: below
GLAD TO HELP SOMEONE! to acquire links go to pastebin and /AGNYFQ62

Help!!!
Most of the links are expired or can't be found.....

TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
email me here > [email protected]

TweakBox04 said:
Most of the links are expired or can't be found.....
Click to expand...
Click to collapse
yes it's impossible to find them

recovery img dropbox. com/s/83777cy ayia8ti3/STARM OBILE %20RECOV% 20CWM .img?dl=0
supersu root zip drop box .com/s/qfhl78 bifwawj3f/supe rsu-flashable- root.zip?dl=0
spreadtrum driver dropbox. com/ s/go1r5 xylh6ghmj k/android_spreadt rum_driver. zip?dl=0
disable driver signature enforcement guide packard-bell-scandic.cus thelp. com/app/answers/detail /a_id/38288/~/windows -10%3A-disable-signed-driver- enforcement
spreadtrum utility drop box. com / s/7nemx01hd0c u30u/SPD_ Upgrade_Tool_R17 .0.0001.zip?dl=0
stock rom needrom. com /download /starmobile-play- boost/
guide install spreadtrum drivers android mtk. com/ install-spreadtrum- usb-driver-manually
adb drivers dropbox.
com/ s/kwddnc xu000ue7 8/adb-setup-1. 4.3.exe?dl=0[
urls are not allowed to post sorry.

Alcatel one touch pop c5 unroot,unbrick,flash stock rom

How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers