Searched around, and didn't see this one. Tablet was a refurb, added the keyboard dock, updated to last system asus released, unlocked the bootloader, rooted. System is stock 4.2.1 with Google bloatware frozen and a handful of free apps, nothing particularly exciting (unless you're thrilled by fbreader, etc.).
Occasionally, the screen "rolls up" to a thin area at the top of the screen. A "swat" (light tap) on the top or sides brings it back, which implies the cable is loose or making intermittent contact. Since the site doesn't allow video as attachment, I stuck a badly-shot short 4M FLV video at http://bes.lofcom.com/tf300t/ to explain better the symptoms. Clearly not too worried about the warranty tag at this point, but of course tearing apart any electronic device should only be attempted as a last resort.
Weird thing is, though, is that it never does it during the two boot screens...even when it's acting up, the initial asus screen and the second metallic-logo spinning-balls screen look fine, but at the moment it switches to the PIN screen it'll roll-up, implying a software cause. Which doesn't jive with tapping it to get it back.
So before I get out the chain saw to take it apart (kidding!), I'm wondering if there's anything else I should look at first.
Related
Today I used the iGo8 GPS for a little bit just to get onto the freeway. The phone tends to go to sleep, and when that happens, it loses it's GPS signal. Since I was already on the freeway, I know my way around so I just let my phone sleep.
When I got home, I realized the bottom part of the screen, where you can scroll through home, people, messages, etc. is messed up. That part of the screen keeps flashing. AND the GPS screen got burnt into the screen, like how things burn into Plasma Screen TVs when you leave it there for a long time. But it's not a completely burn on, it is like a ghost affect.
I have soft resetted my phone. Doesn't work.
Anyone knows how to fix this problem?
Thanks.
I can post pictures/video if it will help.
Have you tried running igo again and closing it down properly?
Yeah, I closed igo properly. It's not just burnt in the igo screen new. It changes. Now it's the Today page. I can see the "Phone" and "Camera" buttons burnt into the lower part of the screen.
ROM Issue?
What ROM are you using? I always use EnergyROM and its a great ROM but it always does the same thing... i thought my phone was ruined the first time i saw this, but when i flashed to another ROM it all went away, im not sure if certain ROMs use different video drivers or what, but my problem atleast seems to just be with the ROM.
Good Luck!
use a all-black or all-white image(i think all black is betteR) and keep it on to try to reduce the burn it...
ohhh. I am using EnergyRom as well. I will change roms and see what's up.
the all black image seems to be a good idea.
I am a complete noob to smartphones and the Relay is my first.
I have a stock, unrooted, unmolested T-mobile $400 prepaid Galaxy S Relay 4G, did the update to Jelly Bean via wi-fi. I've already sent one in for replacement because of the following problems, and the new one behaved the same way.
1. The home screen and pulldown menu do not rotate by gyroscope regardless of the screen rotate setting. This would not be a big deal, except that when the phone comes out of the box, they do rotate (it also rotates to keyboard when keyboard is open). The current phone stopped rotating after I did the update but the old one definitely stopped rotating before then, not sure why or when. It seems subzerobob had this same problem but I can't find any resolution he might have enjoyed: http://forum.xda-developers.com/showpost.php?p=35827475&postcount=748
2. Every time the phone is turned off and on, the time and date setting reset to default which seems to be "automatic time/automatic time zone". This does not work for my purposes and I find it extremely irritating besides.
Can anyone point me in the right direction here or even just explain why these things are happening? I feel like I'm going crazy and can hardly find any similar complaints, and T-mobile has been useless, verging on hostile ever since I bought this cursed thing.
If I recall correctly, the chipset used by our phone has the persistent real time clock disabled by default. And not just in our phone, but any phone that uses it. Apparently there's some sort of bug in it. I believe the people putting together our CM rom have successfully enabled it though.
So, I really really wanted to love this tablet. The disappointments have been many, but this focuses on the most severe and frustrating one.
Whenever I am using Dabbler, Skecthbook Pro, ArtFlow, or any other pen-enabled apps, the weirdest things start to happen. It works OK for a while, but then the tablet only starts receiving input from the stylus. Not even UI elements are usable with my fingers. PLEASE NOTE: I do know the tablet has a stylus-only mode, and this is NOT enabled. PLEASE ALSO NOTE: No, the stylus-only mode in the apps is not enabled either.
After a fresh reboot, I open the drawing app and everything works. Palm-rejection is gorgeous, pen accuracy is spot-on, multitouch gestures as pinch to zoom and panning work flawlessly. But after a while, or after I exit the app and return, it starts progressively degrading performance. At first it only accepts pinch to zoom like 50% of the time. Then it gets worse, until I can't do a thing without the stylus - not even the back, home and multitasking buttons.
I spoke with an nvidia tech support rep, and after a back and forth of emails (mostly me giving him info about the proof of purchase, serial number, etc) he told me to contact the seller (Amazon) and ask for a replacement.
I was about to go ahead and replace it, but I wanted to know if any of you are getting the same issues. On the latest official ROM, can everybody use Dabbler, Autodesk Skechbook, etc. for PROLONGED periods of time, and with a high tablet up time, without issues? Is this issue device-specific?
THANKS so much for any help and sorry for long post.
So,
was just browsing facebook this morning when my screen suddenly changed.
The entire screen was showing like an old school negative
it does survive a reboot, it also shows the screen like that in recovery so i'm guessing it's hardware and not software
see this video: Youtube Link
is this repairable or is it a totall loss and should i go for a new one?
It's probably a hardware issue. Pretty strange, that it takes a while before happening when booting. You can get a replacement screen with all tools needed from here. It's not that hard to repair it, but be sure to watch some videos before and take your time, if you want to do it
I've had the phone since the day it came out. It took me a while to notice but the screen is definitely unresponsive at times. It is actually difficult to notice because, if you are like me and spend hours on your phone every day, if every so often if a touch doesn't register, your brain automatically make you repeat the gesture and you don't even think about it. And, it's OK if it happens like once a day. But with this phone, it's hundred times a day. I thought I was crazy so I recorded a video with my OP5.
See here: https://imgur.com/a/lZS4eVP
OK so this is kind of a very bad occurrence. Usually, it's not always like that. Sometimes it works perfectly fine. I also wonder if this could be the reason why the double tap to wake is also inconsistent, when the screen is off.
Also, yes, I do have a screen protector, but I've had them on all my phones and never had an issue.
Looks like this is happening only with you, is this problem occurring only in specific apps? or globally..
The touch here works snappy and very responsive. Maybe a faulty device? report to service center, I guess.
I also noted unresponsive screen once in a while while trying to click some hyperlinks or items with small clickable icons. But it's not anywhere close to what your video showed. Best and fair thing to do would be: Fresh flash the stock rom, don't install any additional apps then see if the problem persists. If it does, time to call customer service for a replacement unit. Good luck!
I've had similiar issues with my Essential PH-1, turns out it was a defect in the digitizer and I was RMA'd on it.
Nope working great here.
Do I get a new phone if I rma it? Or refurbished?
No I get this sometimes as well. Not nearly as bad as shown in your video, but sometimes it just doesn't register the touch properly and you have to touch it harder for it to register. Or when scrolling it only registers the scrolling partially
i have same problem in the same position
It happens to me sometimes when I tap the screen (for example tapping on a contact in whatsapp) that the screen doensn't respond good. When I tap a few times more and with a little more pressure it's going well. (I didn't test without the factory applyed screen protector)
Do people who have this problem use gestures? For me, the problem also occurs (no reaction when I tap the hyperlink or a small icon) but I noticed that it only occurs when the gestures are on. Maybe there is a problem.