Today I used the iGo8 GPS for a little bit just to get onto the freeway. The phone tends to go to sleep, and when that happens, it loses it's GPS signal. Since I was already on the freeway, I know my way around so I just let my phone sleep.
When I got home, I realized the bottom part of the screen, where you can scroll through home, people, messages, etc. is messed up. That part of the screen keeps flashing. AND the GPS screen got burnt into the screen, like how things burn into Plasma Screen TVs when you leave it there for a long time. But it's not a completely burn on, it is like a ghost affect.
I have soft resetted my phone. Doesn't work.
Anyone knows how to fix this problem?
Thanks.
I can post pictures/video if it will help.
Have you tried running igo again and closing it down properly?
Yeah, I closed igo properly. It's not just burnt in the igo screen new. It changes. Now it's the Today page. I can see the "Phone" and "Camera" buttons burnt into the lower part of the screen.
ROM Issue?
What ROM are you using? I always use EnergyROM and its a great ROM but it always does the same thing... i thought my phone was ruined the first time i saw this, but when i flashed to another ROM it all went away, im not sure if certain ROMs use different video drivers or what, but my problem atleast seems to just be with the ROM.
Good Luck!
use a all-black or all-white image(i think all black is betteR) and keep it on to try to reduce the burn it...
ohhh. I am using EnergyRom as well. I will change roms and see what's up.
the all black image seems to be a good idea.
Related
hi guys,
just got my Dopod 838 pro(TyTN)...and I love it. however I notice the screen brightness is not as bright as my o2 atom. even with the brightness turned all the way up in the settings. however I noticed that when I press the camera button the screen brightness increases for a second (to the same as my atom). but the when I close the camera the screen dims back again. seeing this lets me know that the screen does have the capabilities to be turned brighter then is allowed through the settings. does anyone know a reg hack or a trick so that I can turn the screen brightness up? does everyone else notice that the screen brightness goes up when the camera button is pressed? or is this a hardware issue? thanks for the help guys!
I've not tried it on Hermes, but VJLumos II takes advantage of the extra brightness that occurs when the camera is enabled, to make a super brite screen. This works on the Magician, and can be enabled on the Universal but not disabled until soft reset (I've not been motivated to finish writing the Universal's version.)
If the Hermes exhibits this same characteristic, VJLumos II might work on it. Give it a go and let me know.
V
Hi Vijay555 yeah i was actually on your site and ive heard alot about VJLumos II. But I thought it was only compatible with the Magician. Do you think there is any risk of it Hard resteting my 838pro(Hermes)? Anything else i should know before installing it? Does it work 100% correct on the magician? Please let me know!
Thanks!
Works 100% on the Magician, and the active part works on the Universal.
Basically it mimicks the camera and causes it to be activated, causing the extra brightness.
I can't guarantee 100%, but say 99% that it can't hardreset your device (without having the device in front of me I can't say...)
It'll either work or not work, it shouldn't interact with anything else.
I'd be interested to get a Hermes rom dump at some point to see what it's like. It's a great piece of hardware, I'm wondering how to get one now I've jumped ship to the Mio!
V
yeah the hermes is great. Ok well i guess i will be the guinea pig and test it out on my device...haha i hope nothing happens. Ill install it in a few hours and let you know what happens. If i need to remove it will it just uninstall?
By the way is the a reg hack that can do this also?
There's no registry setting I know of that will do this, but there might well be; however, as I said, VJLumos does this by interacting with the hardware in an unexpected way, so it's unlikely to be replicated in the registry.
I think you can run VJLumos in stand alond mode, without installing (which will cause it to be enabled every time you switch on). Just run it in stand alone mode to test it out.
V
Hi all,
I'll also try with Wizard,should I or not?
Any effect on battery life. I mean is it more than max of hardware brightness
vijay555 said:
There's no registry setting I know of that will do this, but there might well be; however, as I said, VJLumos does this by interacting with the hardware in an unexpected way, so it's unlikely to be replicated in the registry.
I think you can run VJLumos in stand alond mode, without installing (which will cause it to be enabled every time you switch on). Just run it in stand alone mode to test it out.
V
Click to expand...
Click to collapse
Hi Vijay, what do you mean run it in stand alone mode?
fordcan: I'm sure that it doesn't work on the Wizard, if it did then I would have written VJCandela for it as well. Not right now, and not until I get a wizard in my hands (all you new Hermes guys, if you find yourself with a spare Wizard, I can give it a good home!)
phame: if you just double click on the VJLumosII icon, it'll enable superbrite once. If you click on the -install icon it will try to enable it every run.
Like I said, it's not written fully for WM5 yet, because I never used my Universal as my main phone, and frankly the screen was bright enough. The magician benefited from it, but hopefully any HTC phone that exhibits the curious camera loading/screen brighter thing might benefit from it.
However, for now, as I said, it's not fully debugged for WM5. But test it, and if it works, I'll try to make some time to fix it. The problem is that it will only work the first time, not every time you run it. Hopefully easily fixable.. But it won't do any damage.
I presume it will drain the battery faster, since screen is brighter, but if you use it in bursts or recharge daily, it shouldn't be an issue. I never used my Magician without it, and it was fine after 1 year.
V
vijay555 said:
fordcan: I'm sure that it doesn't work on the Wizard, if it did then I would have written VJCandela for it as well. Not right now, and not until I get a wizard in my hands (all you new Hermes guys, if you find yourself with a spare Wizard, I can give it a good home!)
Like I said, it's not written fully for WM5 yet, because I never used my Universal as my main phone, and frankly the screen was bright enough. The magician benefited from it, but hopefully any HTC phone that exhibits the curious camera loading/screen brighter thing might benefit from it.
V
Click to expand...
Click to collapse
thanx for the reply,
I a bit confused; you are telling "doesn't work on Wizard" and at the same time "any HTC phone that exhibits the curious camera loading/screen brighter thing might benefit from it " Wizard got this..
curiosity kill the cat :wink: Better try and see issue :idea:
fordcan:
Sorry, it might benefit from the technique, not necessarily this version.
Like VJCandela, I have to have a Wizard in my hands to experiment with the camera driver. It'll be easy to write once I've got the device in my hands, but I can't test it.
It shouldn't do any harm, since it'll probably just not be able to find the correct camera driver on the Wizard. But give it a go and tell me if it does anything.
I never knew that the Wizard has this screen brightening effect
V
Absolutely not working.. tells; "Can't load Superbrite Libraries!"
Anyway "Trying times are no time to quit trying"
Ok i downloaded the cab file, copied it to my memory card and executed the file. And it worked perfectly instantly the screen brightness went up. And it didnt seem to be causing any type of slow down or problems.
When i click the camera button i just get an error message which sais "the camera app is already in use". But luckliy no soft reset.
However i couldnt find how to turn it off. It doesnt show up in the list of "running programs"
so far the way i launched it was by just clicking in the icon. Can you please tell me how to do the "-install" thing you were talking about?
and how do i shut it off if i want to use th camera? At the moment i can only do a soft reset for it to turn off.
Thanks!
You should have a bunch of shorcuts installed in yor startmenu.
Launching VJLumosII with parameters -off will disable it, clicking -install will install it so it's run every time it's switched on.
However, I've not tested the -install option on WM5 so let me know if it works appopriately. I'll get around to reweriting it eventually.
V
i tried clicking the short cut to shut it off. But i get an error message saying something about the application being corrupt. So to diable it i still have to soft reset. Im scared to install the app in fears that the remove shortcut may not work
Also ive noticed the battery drains about 30% faster with the app running.
any ideas?
As I've said, it only half works on anything other then the Magician. I'll fix it sometime as a priority - I just got a Hermes, and have to say that the screen is a bit "meh", not as bright as a Mio 701 or Magician. Washed out colours and poorer viewing angle. Superbrite is necessary, not optional
V
I've just switched from a Prophet to Magician. Couldn't stand the slowness of WM5, especially with some big database software I use. The only thing I miss is the Prophet's screen brightness (OK, battery life was great too) so I was really pleased to find vjlumosII. The only downside I've run into is that it adds about 3 seconds to the power up time when I press the power button on my Jam. I've not seen this mentioned elsewhere. Is this a normal effect of the software?
Do you see the slowness on the Magician or the Prophet?
On my Magician I never noticed it.
I just wrote a new kinda app yesterday for low level hacking, and will see if I can apply this to VJLumos. Hopefully some new ish updates coming soon - however, I am using my time well I hope. I'm writing a new website, hence the slow progress on programming.
V
For the Hermes, see here:
http://forum.xda-developers.com/showthread.php?t=279365
V
vjay
Vijay,
I've only used vjlumosII on the Magician. The Prophet is the first PDA/phone with a screen that was as bright as I'd want, so I never tried vjlumosII on it.
The delay on my JAM (the 128MB RAM version) is not subtle. It takes a full 3 sec for the phone to come on after you press the power button. The same thing happens if you push any other button to turn on the phone. There doesn't seem to be any delay in the phone coming on if it is awakened by recieving an incoming call. When I turn off vjlumosII the power up delay disappears.
Also the screen brightness initially doesn't come on at maximum. It takes another 2 seconds to boost up.
Thanks.
vijay555 said:
Do you see the slowness on the Magician or the Prophet?
On my Magician I never noticed it.
I just wrote a new kinda app yesterday for low level hacking, and will see if I can apply this to VJLumos. Hopefully some new ish updates coming soon - however, I am using my time well I hope. I'm writing a new website, hence the slow progress on programming.
V
Click to expand...
Click to collapse
So after updating to a couple WM6 ROMS and being happy, my phone starts to act weird, my screen starts to turn white at random times and i have to keep the keyboard slid out slightly to keep the screen from going white. Then after a while it changes again, and now my screen always goes white until i slide the keyboard in and out a couple of times and then slide it back in, but it will only stay normal for a little and my screen will go white again. In hopes to fix this i switched back to my official T-Mobile 2.26 ROM but i am still having the same problem. Can someone please help me fix this, my phone is almost at the brink of not working and i would have to wait about half a year before i can get a new one. Any help will be appreciated.
are you overclocking at all when you are experiencing the problem???
I have heard that overclocking to too high of a speed will cause the phone to go to a white screen..
just a thought
also, if you could, please list all third party apps and the current ROM you are running
.:Nstefanelli:.
Well i was overclocking to 260 using battery status, but i dont do that anymore,i am currently running the T-Mobile 2.26 official ROM, and i have these programs installed:
Wm5torage
Fizz Weather 2
TCPMP 0.81
Pocketdict
If you need some more info you can look at my signature too.
upgrade your IPL/SPL to 3.08..
double_ofour said:
upgrade your IPL/SPL to 3.08..
Click to expand...
Click to collapse
how do u do that ?
killerkhatiby009, you can check if it is a hardware problem by performing a remote control (PC controlling PPC, google for it) and start messing with your phone, see if the PC gives you the same problem.
IF the PC gives a good reading (e.g. no white screen) while the PPC gives you a white face, then it is probably the screen problem (not sure what).
IF both the PC and PPC gives you the white face, it is then either software error (hopefully so), OR internal harware error (e.g you've burned your microprocessor?).
Ok thanks for the help, ill go and try that ppc remote controll thing and report back.
Ok after testing it the PC comes up fine while the Pocket PC comes up white.
double_ofour said:
upgrade your IPL/SPL to 3.08..
Click to expand...
Click to collapse
will this be able to fix it?
can anyone help me?
hanmin said:
IF the PC gives a good reading (e.g. no white screen) while the PPC gives you a white face, then it is probably the screen problem (not sure what).
Click to expand...
Click to collapse
Ok after testing it the PC comes up fine while the Pocket PC comes up white.
Click to expand...
Click to collapse
Sounds like a hardware problem to me, which may be a result of your constant overclocking. It may also be due to a bad switch in the keyboard slider.
You might want to contact your provider and see if the phone is still under warranty and/or if you can get a replacement.
Well my phone is no longer under warrenty, does anyone know of a way to fix my phone or get a replacement?
Hi,
Can someone tell me how to upgrade my IPL please ?
found my answer. Thanks anyway
I have the EXACT same problem
Ignore my signature - I downgraded back to the latest stock T-Mobile ROM. I see the same problem no matter what ROM I am running.
It is EXACTLY the same as you describe here. I can usually make it stop by pressing the sides together (holding the screen and keyboard slider tighly closed). Once it stops if I set it down and don't touch it it will work fine.
Also when I reboot the splash screen never has the problem - the problem starts as soon as WM boots.
So what did you have to do? Buy a new one? Or were you able to get service or an exchange?
It seems to be the mechanics of the display connector that are causing this. I looked in the service manual and it shows a stiff flat flex-cable connecting the keyboard to the screen, and it seems to me that this cable is the problem - either it is damaged or it is not fully seated on one end or the other.
I considered trying to dissassemble it and clean/reset connecters - for about a nanosecond. But it looks way too fragile and full of hidden little plastic hooks that will break off if you don't release each one in exactly the right way and then it will never go back together again.
I switched roms to cog 4 and I didnt notice anything weird and then a few hours later I noticed that my auto rotate was not working. when I say not working I mean relly not working, when I open any app it will only open in landscape mode and the home screen is only viewable in portrait mode.
I have flashed back to stock, done a master clear, reflashed cog 4. I am at a loss now. Any help would really be appreciated.
I don't know if it will work for you, but......go to settings; display; scroll down to horizontal calibration and lay your phone on its back....follow directions.....and hopefully all is better.
I definitely was overthinking the problem and getting NO help from those in the know. I UTFSE (nice acronym) for hours and assumed that one of the ROMs had an I9000 kernel and corrupted the accelerometer.
I was probably too tired from nicely suggested (UsingTheF......SearchEngine) and assumed horizontal was from Upright Y axis, X side axis, but not Z (face up).
My own fault and probably one of the reasons no one chose to answer my requests.
Holy hell I must have tried this 5 times before I wiped and then loaded a new rom. everytime I did it it would callibrate it was just stuck dead in the center. I did it now and it worked.
Thank you for getting me to retry the simple things (now I seem like a moron, but I swear I really did try it haha)
Hi All,
I have looked around for a similar problem but could not find anything.
I have a problem with my screen on my HTC Sensation. I was using Virtuous ROM but when this started happening, I wiped with superscript and switched to Insertcoin ROM and the problem actually became worse.
When I lock my phone with the Power button, instead of the screen turning black instantly, the bottom and top of the screen slide up and meet in the middle (like a transition that you put inbetween chapters in a home made movie).
The same happens when I unlock the phone.. and it's very annoying and of course very slow.
I can't work out if it's hardware or not. I just recently edited the build.prop file (only removed the '#' from the screen capture line- which worked, didn't touch anything else)... and now when I unlock, the font and app icons seem a little enlarged and blurry.. then once I slide between screens and back it goes to normal.
I'm a noobie and would appreciate the help.
Thanks
Ginox
I always thought is was on purpose
No, this is very exaggerated and slow. Usually the phones screen goes off reasonably quick when you lock the phone (and vice versa with unlocking).
It sounds like you are describing the CRT animation for locking and unlocking, like an old TV turning on/off. Some ROMs include this by default. If the phone is running slow/sluggish it can look poor and cause other issues like the funky looking icons.
~T.J.
Hmm, it doesn't seem like that kind of problem... my phone runs reasonable fast.
Here's a video of it:
twitvid.com/ZMWJA
Can't direct link, please copy and paste.
Yup, thats the CRT animation, that's what its supposed to do. It must have been included with a ROM you installed by default. Like I said, its meant to look like you are turning on or off and old tube type television or computer monitor. Someone might have a flashable file out there for you to remove it, I don't know. At least now you can search "remove CRT animation" or something and see what you can get.
~T.J.
Oh really, thats interesting as I was pretty sure it done something similar on the previous Virtuous Rom.
Does anyone else out there have this feature on their Insertcoin ROM? (I've only ever had stock, Virtuous and Insertcoin).
I will have a search but if anyone knows the fix, please let me know
I've had the phone since the day it came out. It took me a while to notice but the screen is definitely unresponsive at times. It is actually difficult to notice because, if you are like me and spend hours on your phone every day, if every so often if a touch doesn't register, your brain automatically make you repeat the gesture and you don't even think about it. And, it's OK if it happens like once a day. But with this phone, it's hundred times a day. I thought I was crazy so I recorded a video with my OP5.
See here: https://imgur.com/a/lZS4eVP
OK so this is kind of a very bad occurrence. Usually, it's not always like that. Sometimes it works perfectly fine. I also wonder if this could be the reason why the double tap to wake is also inconsistent, when the screen is off.
Also, yes, I do have a screen protector, but I've had them on all my phones and never had an issue.
Looks like this is happening only with you, is this problem occurring only in specific apps? or globally..
The touch here works snappy and very responsive. Maybe a faulty device? report to service center, I guess.
I also noted unresponsive screen once in a while while trying to click some hyperlinks or items with small clickable icons. But it's not anywhere close to what your video showed. Best and fair thing to do would be: Fresh flash the stock rom, don't install any additional apps then see if the problem persists. If it does, time to call customer service for a replacement unit. Good luck!
I've had similiar issues with my Essential PH-1, turns out it was a defect in the digitizer and I was RMA'd on it.
Nope working great here.
Do I get a new phone if I rma it? Or refurbished?
No I get this sometimes as well. Not nearly as bad as shown in your video, but sometimes it just doesn't register the touch properly and you have to touch it harder for it to register. Or when scrolling it only registers the scrolling partially
i have same problem in the same position
It happens to me sometimes when I tap the screen (for example tapping on a contact in whatsapp) that the screen doensn't respond good. When I tap a few times more and with a little more pressure it's going well. (I didn't test without the factory applyed screen protector)
Do people who have this problem use gestures? For me, the problem also occurs (no reaction when I tap the hyperlink or a small icon) but I noticed that it only occurs when the gestures are on. Maybe there is a problem.