Good , someone who knows if there any Rom compatible with the Moto g 2015 1548 Virgin Mobile XT , cdma , as I tried eh cyanogenmod 12, 13 and do not work, flashed in and fix apn 3derp.
forgive mistakes but do not speak English and I am using translator:crying:
Put cm13, gapps and APN fix on your SD card
Boot to twrp
Wipe everything except SD card
Flash cm13 and gapps
Go to mount and Mount system
Now flash APN fix
Wipe cache and reboot system
I would also like a way to get custom roms to work with this phone. I have tried many different roms and the apn fix, and none of them allow data to work.
jonny30bass said:
I would also like a way to get custom roms to work with this phone. I have tried many different roms and the apn fix, and none of them allow data to work.
Click to expand...
Click to collapse
I use all the roms available for virgin mobile osprey without data issues . pick a rom of your liking for your specific device of course and follow the steps hossman gave in the post above you and try this apn fix . https://drive.google.com/folderview?id=0B1mtB5XM-ndHdGVBUGdpekxUbVU its an aroma installer so pick your correct apn for your carrier and all should be fine. All credit goes to the awesome devs at team OctOs for the aroma apn fix !
jonny30bass said:
I would also like a way to get custom roms to work with this phone. I have tried many different roms and the apn fix, and none of them allow data to work.
Click to expand...
Click to collapse
ravollmer said:
I use all the roms available for virgin mobile osprey without data issues . pick a rom of your liking for your specific device of course and follow the steps hossman gave in the post above you and try this apn fix . https://drive.google.com/folderview?id=0B1mtB5XM-ndHdGVBUGdpekxUbVU its an aroma installer so pick your correct apn for your carrier and all should be fine. All credit goes to the awesome devs at team OctOs for the aroma apn fix !
Click to expand...
Click to collapse
This doesn't work. I tried it. I believe that it is because I am using a Data Done Right plan from Walmart. The version of the phone that I have only accepts the Data Done Right plans. I believe that they might use a different APN. I have searched for hours on the internet and can't find anything that works.
jonny30bass said:
This doesn't work. I tried it. I believe that it is because I am using a Data Done Right plan from Walmart. The version of the phone that I have only accepts the Data Done Right plans. I believe that they might use a different APN. I have searched for hours on the internet and can't find anything that works.
Click to expand...
Click to collapse
Have you tried to pull the xml file from the stock rom ? Then try to manually enter the apns in the cm ROMs . just a suggestion [emoji6]
ravollmer said:
Have you tried to pull the xml file from the stock rom ? Then try to manually enter the apns in the cm ROMs . just a suggestion [emoji6]
Click to expand...
Click to collapse
I actually just searched the telephony.db file using sqlite and found the correct APN, and then I manually entered it into the rom and it worked. There were almost 3000 different APNs in the XML, so that approach was almost impossible lol. It was much easier to extract the correct APN from the telephony.db file because there was a "current" attribute in the "carriers" table that specified the currently used APN for the stock ROM. I made a post for the fix in a different thread. Here is the link: http://forum.xda-developers.com/showpost.php?p=65987522&postcount=1254
mine wont let me manually enter it
Related
Hi, I've been using packet data on my phone (Samsung Galaxy Ace Plus S7500) with stock firmware ever since I go my phone.
I've been trying to install CyanogenMod 10.1 for 3 days, and I can not get packet data to work; I have created the APN as should be for my network provider, but nothing happens; it looks like the phone does not even try connecting to the 3G APN.
Is there anything specifc to be done in order to get packet data working again?
rcplktb said:
Hi, I've been using packet data on my phone (Samsung Galaxy Ace Plus S7500) with stock firmware ever since I go my phone.
I've been trying to install CyanogenMod 10.1 for 3 days, and I can not get packet data to work; I have created the APN as should be for my network provider, but nothing happens; it looks like the phone does not even try connecting to the 3G APN.
Is there anything specifc to be done in order to get packet data working again?
Click to expand...
Click to collapse
i have also this issue b4, on CM10.1.2 my mobile internet is working very stable at first but drop after several hours. in signal bar it was E sign instead of H like on first flash. check my post on OP page 213 #2130
http://forum.xda-developers.com/showthread.php?t=2201821&page=213
press thanks if i help!
ANDROID-000 said:
i have also this issue b4, on CM10.1.2 my mobile internet is working very stable at first but drop after several hours. in signal bar it was E sign instead of H like on first flash. check my post on OP page 213 #2130
http://forum.xda-developers.com/showthread.php?t=2201821&page=213
press thanks if i help!
Click to expand...
Click to collapse
I had seen that post of yours already and I had tried it, in vain. Mine seems to be a different problem altogether; it looks like my phone does not even try connecting through the packet data APN for some reason.
When I'm on that screen (*#*#4636#*#* --> Phone Info), there's a field in there which says "Data Attempts: 0". I even tried accessing the menu on that screen, and there was "Enable data connection", I thought that would do the trick, but nada!
Is there some way I can debug this to see why the phone is not using the Data APN?
Ah, by the way, I have also tried with CM-10, same problem. When I revert back to stock firmware, works perfectly.
rcplktb said:
I had seen that post of yours already and I had tried it, in vain. Mine seems to be a different problem altogether; it looks like my phone does not even try connecting through the packet data APN for some reason.
When I'm on that screen (*#*#4636#*#* --> Phone Info), there's a field in there which says "Data Attempts: 0". I even tried accessing the menu on that screen, and there was "Enable data connection", I thought that would do the trick, but nada!
Is there some way I can debug this to see why the phone is not using the Data APN?
Ah, by the way, I have also tried with CM-10, same problem. When I revert back to stock firmware, works perfectly.
Click to expand...
Click to collapse
As far as i know you are the only 1 i saw who have this problem, others are low connection only. You sure you set your apn correctly? Note your apn setting in stock then flash cm check the apn setting if it is the same on the stock. Or just try to reflash the rom and make sure you follow the installation guide in op.
Try also to consult others maybe they can help.
---------- Post added at 01:24 AM ---------- Previous post was at 12:31 AM ----------
ANDROID-000 said:
As far as i know you are the only 1 i saw who have this problem, others are low connection only. You sure you set your apn correctly? Note your apn setting in stock then flash cm check the apn setting if it is the same on the stock. Or just try to reflash the rom and make sure you follow the installation guide in op.
Try also to consult others maybe they can help.
Click to expand...
Click to collapse
Edit: i remember the first time I use mobile internet my network send me some requirements like install handset setting, etc. w/c can be access in sim toolkit in stock rom. Our cm rom don't have sim toolkit if i remember (sorry my phone was brick cant see it) try that hope it help.
ANDROID-000 said:
As far as i know you are the only 1 i saw who have this problem, others are low connection only. You sure you set your apn correctly? Note your apn setting in stock then flash cm check the apn setting if it is the same on the stock. Or just try to reflash the rom and make sure you follow the installation guide in op.
Try also to consult others maybe they can help.
---------- Post added at 01:24 AM ---------- Previous post was at 12:31 AM ----------
Edit: i remember the first time I use mobile internet my network send me some requirements like install handset setting, etc. w/c can be access in sim toolkit in stock rom. Our cm rom don't have sim toolkit if i remember (sorry my phone was brick cant see it) try that hope it help.
Click to expand...
Click to collapse
Well, like I said, after I saw that Packet Data was not working on CM-10.1, I flashed to stock firmware; I created the same APN with the exact same settings as on 10.1, it worked fine; I thought I'd try CM-10 this time, so I did, and I created the same APN again, doesn't work; now I have reinstalled 10.1, with the hope that we come up with a solution soon.
Is there anyway I can see some connection debugging? Using adb, or otherwise? There must be a reason why the phone is not choosing the packet data APN, right?
Edit: I don't know if this could help, but I'm from a tiny island in the Indian Ocean called Mauritius. My operator is Emtel, and you can see the settings for Android on their website (emtel.mu/android). Based on that page, I am supposed to set up the APN as follows:
- For Name, enter WEB
- For APN, enter web
- For APN Type select Internet
- Leave all other entries blank
- Save
Click to expand...
Click to collapse
On stock firmware, I do have a drop-down to 'Select Internet' for APN type. On CM-10 and CM-10.1 however, I don't have the drop-down; I have only a textfield; could that be a problem?
rcplktb said:
Well, like I said, after I saw that Packet Data was not working on CM-10.1, I flashed to stock firmware; I created the same APN with the exact same settings as on 10.1, it worked fine; I thought I'd try CM-10 this time, so I did, and I created the same APN again, doesn't work; now I have reinstalled 10.1, with the hope that we come up with a solution soon.
Is there anyway I can see some connection debugging? Using adb, or otherwise? There must be a reason why the phone is not choosing the packet data APN, right?
Click to expand...
Click to collapse
Sorry dude, i dont know already of what is the other sulotion. Try asking our mate maybe they know.
ANDROID-000 said:
Sorry dude, i dont know already of what is the other sulotion. Try asking our mate maybe they know.
Click to expand...
Click to collapse
Well, I think I'll just have to wait here for someone else to answer; I don't know where I can ask this question except here.
Fixed it!
rcplktb said:
Well, I think I'll just have to wait here for someone else to answer; I don't know where I can ask this question except here.
Click to expand...
Click to collapse
Ok, so I was able to fix it in a very simple way; I checked out this post (showthread.php?t=2316943), and in there they tell you how to manually modify the /system/etc/apns-conf.xml file; I checked it and went through it, checking how the other APNs were set up; it turns out I just had to change APN Type to "Default" instead of "Internet" as specified on Emtel's website.
It now works!
Thanks for trying to help , ANDROID-000.
Just for clarification; I ended up not needing to modify the /system/etc/apns-conf.xml file manually; I just changed the APN Type from the interface.
rcplktb said:
Ok, so I was able to fix it in a very simple way; I checked out this post (showthread.php?t=2316943), and in there they tell you how to manually modify the /system/etc/apns-conf.xml file; I checked it and went through it, checking how the other APNs were set up; it turns out I just had to change APN Type to "Default" instead of "Internet" as specified on Emtel's website.
It now works!
Thanks for trying to help , ANDROID-000.
Just for clarification; I ended up not needing to modify the /system/etc/apns-conf.xml file manually; I just changed the APN Type from the interface.
Click to expand...
Click to collapse
Gud to hear, you help me too. My friend had the same problem maybe I will try this too.:thumbup:
ANDROID-000 said:
i have also this issue b4, on CM10.1.2 my mobile internet is working very stable at first but drop after several hours. in signal bar it was E sign instead of H like on first flash. check my post on OP page 213 #2130
http://forum.xda-developers.com/showthread.php?t=2201821&page=213
press thanks if i help!
Click to expand...
Click to collapse
Aftet reboot the Network Preferred turn back to "WCDMA preferred".. How to make "WCDMA only" be permanently?
Sent from my GT-S7500 using xda app-developers app
mohdradzi84 said:
Aftet reboot the Network Preferred turn back to "WCDMA preferred".. How to make "WCDMA only" be permanently?
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
thats i don't know, sorry! I just do the step again everytime i reboot my phone. Anyways, if your phone was reeboted just the same too:sly::thumbup:
---------- Post added at 12:21 PM ---------- Previous post was at 12:19 PM ----------
ANDROID-000 said:
thats i don't know, sorry! I just do the step again everytime i reboot my phone. Anyways, if your phone was reeboted just the same too:sly::thumbup:
Click to expand...
Click to collapse
I'm searching for it too but as of now i'm contented w/ this.:beer::beer:
Dear all,
it is the first time for me to post something in this forum, I hope you guys forgive my poor english
Anyway, I was rooted and installed the other roms but I found that I cannot use the mobile network anymore (even I checked the APN)
I hope the experts in this forum can give me some ideas to fix this problem
thx very much
Hello,
Did you perform a full wipe (Data/cache/dalvic) before you flashed a custom rom? Which rom did you flash?
Head over to the recovery and wipe the above things I have mentioned and again flash the rom and then the gapps..
vin4yak said:
Hello,
Did you perform a full wipe (Data/cache/dalvic) before you flashed a custom rom? Which rom did you flash?
Head over to the recovery and wipe the above things I have mentioned and again flash the rom and then the gapps..
Click to expand...
Click to collapse
Thanks for your reply very much, I was flashed the rom GarTot-CARBON-KK4.4.2-0228-Nexus5 in my machine and I did triple wipes as well...
Btw, wt is the meaning of "gapps"?
JACKYCYK said:
Thanks for your reply very much, I was flashed the rom GarTot-CARBON-KK4.4.2-0228-Nexus5 in my machine and I did triple wipes as well...
Btw, wt is the meaning of "gapps"?
Click to expand...
Click to collapse
Could you please share the link of the rom? From where did you download it??
If you have performed wipes correctly and flashed the rom successfully, I don't see any reason for it not to access connection(2g,3g)... You're using the kernel which came with the rom, right?
Gapps means Google Apps... You need to flash it after the rom flash usually...
I'm having the same problem! I just flashed faux kernel with ParanoidAndroid and I can't get any data connection
Bump, any ideas?
quentin0 said:
I'm having the same problem! I just flashed faux kernel with ParanoidAndroid and I can't get any data connection
Click to expand...
Click to collapse
Verify your APNs are correct
Sent from my Nexus 5
Pirateghost said:
Verify your APNs are correct
Sent from my Nexus 5
Click to expand...
Click to collapse
I believe they are correct. I tried the APN settings which looked correct that were already there, and I even tried deleting out all the APNs and recreating T-mo LTE one that I use.
I tried reflashing back to stock and I still cannot connect.
I popped my SIM into my Nexus 4 and it works perfectly, but not when it's in my Nexus 5.
Well I figured out my issue, it's super embarrassing.
I had replaced my battery because it wasn't holding a charge well anymore. Apparently the antenna on the volume button side of the phone wasn't pushed down all the way (i think it got unhooked when prying open the cover).
The reason I thought it was software was because I flashed all this stuff right after I put the cover back on. Lesson learned: change one thing at a time, will make troubleshooting easier if things go south,
vin4yak said:
Could you please share the link of the rom? From where did you download it??
If you have performed wipes correctly and flashed the rom successfully, I don't see any reason for it not to access connection(2g,3g)... You're using the kernel which came with the rom, right?
Gapps means Google Apps... You need to flash it after the rom flash usually...
Click to expand...
Click to collapse
Hi guys,
thanks for your replies, I was installed the rom made by Carbon,
https:// carbon-rom.com/downloads/?device=hammerhead
Here is my installing steps:
1. Backup all of my data,
2. Download the .zip file from the link
3. reboot into the recovery mode
4. triple wipes.
5. install the .zip frm SD card
6. reboot
7. checked the mobile network.
8. Failed (the logo of mobile signal is still the same as "Off" in the "Mobile Network", No "H", "2G", "3G" or "LTE" logo):crying:
Please tell me if I did any wrong steps in there
JACKYCYK said:
Hi guys,
thanks for your replies, I was installed the rom made by Carbon,
https:// carbon-rom.com/downloads/?device=hammerhead
Here is my installing steps:
1. Backup all of my data,
2. Download the .zip file from the link
3. reboot into the recovery mode
4. triple wipes.
5. install the .zip frm SD card
6. reboot
7. checked the mobile network.
8. Failed (the logo of mobile signal is still the same as "Off" in the "Mobile Network", No "H", "2G", "3G" or "LTE" logo):crying:
Please tell me if I did any wrong steps in there
Click to expand...
Click to collapse
After rom flash, flash the carbon gapps: http://www.androidfilehost.com/?fid=23311191640114013
Double check whether the network/apn settings are entered correctly...
You've followed all the steps correctly m8.. not sure what's causing this problem...
Did you try inserting a different sim? May be it's a sim card problem??
Hi All.
I've got a Samsung Galaxy Relay 4G using PhilZ Touch 6 recovery and cm-11-20140518-NIGHTLY-apexqtmo. I have an AT&T sim card and when I try to input APN settings for AT&T nothing saves. I've tried everything including 5 ROM's, all running KitKat emulations. I read that Android 4.0+ will not allow you to change APN settings, but is there some workaround. I've also discovered it disables APN apps from accessing APN settings.
I've also tried to flash 10.2 but I get Status 7 errors every time I try. I've followed instructions on removing access commands from the updater-script file and re-zipping, but it also aborts.
I've called *#*#4636#*#* and it doesn't look like the phone sees the SIM card, but maybe that's due to the APN settings? It won't even call let alone send/receive data. I've tried 2 different AT&T SIM cards with the same result.
Any help would be greatly appreciated!
Kenwood97031 said:
Hi All.
I've got a Samsung Galaxy Relay 4G using PhilZ Touch 6 recovery and cm-11-20140518-NIGHTLY-apexqtmo. I have an AT&T sim card and when I try to input APN settings for AT&T nothing saves. I've tried everything including 5 ROM's, all running KitKat emulations. I read that Android 4.0+ will not allow you to change APN settings, but is there some workaround. I've also discovered it disables APN apps from accessing APN settings.
I've also tried to flash 10.2 but I get Status 7 errors every time I try. I've followed instructions on removing access commands from the updater-script file and re-zipping, but it also aborts.
I've called *#*#4636#*#* and it doesn't look like the phone sees the SIM card, but maybe that's due to the APN settings? It won't even call let alone send/receive data. I've tried 2 different AT&T SIM cards with the same result.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
yes there is a way to be able to and requires modding the build.prop file... i can show you how if need be
REV3NT3CH said:
yes there is a way to be able to and requires modding the build.prop file... i can show you how if need be
Click to expand...
Click to collapse
Actually it turns out I couldn't see the IMEI number either, so I returned to stock ROM and could then see the IMEI. I then flashed CWM 6.0.1.2 and CM 10.2 and was able to then set the APN. I'm still having trouble getting phone and data connection over the cell, but at least it now shows some bars. Thanks for replying, though.
My connection issue was a problem with the SIM. It's all working properly now.
I'm working on transitioning my Galaxy S5 from Sprint to Ting ... but I'm running into mobile data problems and I hope someone on here can help! I went back to stock so I could update the PRL (profile) and everything seemed to be working okay. I went back to CM13 and I can make phone calls just fine, but the mobile data does not work. In CM13, I can't update the PRL like I can with the stock rom. Anyone have a workaround for this? Is there a way to update the PRL in CM13? Will mobile data work even if I'm able to update the PRL in CM13? Should I try another custom rom or should I just make do with rooted stock? Any thoughts or ideas would be greatly appreciated. Thanks in advance!
bswiatowy said:
I'm working on transitioning my Galaxy S5 from Sprint to Ting ... but I'm running into mobile data problems and I hope someone on here can help! I went back to stock so I could update the PRL (profile) and everything seemed to be working okay. I went back to CM13 and I can make phone calls just fine, but the mobile data does not work. In CM13, I can't update the PRL like I can with the stock rom. Anyone have a workaround for this? Is there a way to update the PRL in CM13? Will mobile data work even if I'm able to update the PRL in CM13? Should I try another custom rom or should I just make do with rooted stock? Any thoughts or ideas would be greatly appreciated. Thanks in advance!
Click to expand...
Click to collapse
Did you edit the apns to add in yours for ting? There is probably also a flashable zip to do it. I'm not on ting so not sure but as a boost client I have to flash APN fixes.
Kreatur3 said:
Did you edit the apns to add in yours for ting? There is probably also a flashable zip to do it. I'm not on ting so not sure but as a boost client I have to flash APN fixes.
Click to expand...
Click to collapse
Thank you for your response! It prompted me to start digging more into the APNs and trying to figure out what needs to be done further. There is a Ting APN in CM13 ... and after messing with it a little, I at least got to the point that I could get 3G data working. So thank you for that!! I can't get LTE to work however. I'm in the process of digging around and trying to find out how to make LTE work.
bswiatowy said:
Thank you for your response! It prompted me to start digging more into the APNs and trying to figure out what needs to be done further. There is a Ting APN in CM13 ... and after messing with it a little, I at least got to the point that I could get 3G data working. So thank you for that!! I can't get LTE to work however. I'm in the process of digging around and trying to find out how to make LTE work.
Click to expand...
Click to collapse
Good luck man. I'm not on ting but if you could report back, after getting it to work, for others on ting. That would be awesome!
I ended up using the new 6.0.1 stock rom posted by muniz (found here: http://forum.xda-developers.com/spr...ment/rom-g900ppca-6-0-1-stock-rooted-t3387717) and LTE works flawlessly on it. If I can figure out how to carry and integrate the APN settings from that rom into CM13, I would probably be all set. But the key is figuring out how to make that happen.
bswiatowy said:
I ended up using the new 6.0.1 stock rom posted by muniz (found here: http://forum.xda-developers.com/spr...ment/rom-g900ppca-6-0-1-stock-rooted-t3387717) and LTE works flawlessly on it. If I can figure out how to carry and integrate the APN settings from that rom into CM13, I would probably be all set. But the key is figuring out how to make that happen.
Click to expand...
Click to collapse
You can either find a working app to back them up and then restore the APN in your new rom. Just go after and make sure it's enabled. Or you can wrote down the APN settings and manually add them in on your new rom. You can do it!
I extracted the file from Ting APMv5.zip and placed it in the /SYSTEM/ETC directory. I had to use root browser to have the privileges to do that. I then used the "change APN" app from the play store to "reset to default". I have to go through this every time I update to a new nightly, so I don't think CM13 includes the Ting Apn. Hope this works.
My Moto G3 XT1550 2GB always randomly reboots everytime when I install any Nougat OS.:crying:
I need help.
Anyone please!?!?
maheshfuture said:
My Moto G3 XT1550 2GB always randomly reboots everytime when I install any Nougat OS.:crying:
I need help.
Anyone please!?!?
Click to expand...
Click to collapse
Clean flash... wipe system, data, and caches, then flash only the ROM without Gapps and verify boot. If it still fails you will need to give us more information of what you were on before, especially any custom kernels you may have tried.
I tried.
acejavelin said:
Clean flash... wipe system, data, and caches, then flash only the ROM without Gapps and verify boot. If it still fails you will need to give us more information of what you were on before, especially any custom kernels you may have tried.
Click to expand...
Click to collapse
I installed AOSP, Lineage OS and Ressurection Remix WITHOUT no other custom Kernels with and without installing Gapps. But when I run Chrome ,Maps or Mx Player, it soft reboots itself. And also the internet connnection and calls gets cutoff while downloading files. All Nougat roms that I installed has the same problem. So now I'm running stock rom 6.0.1 rooted and it has not shown any of the above problems. And also the phone lags from time to time on 7.x.x. I am completely hopeless now now. I love nougat. And I'm a big fan of Custom ROMs. Please can you find some other way.
maheshfuture said:
I installed AOSP, Lineage OS and Ressurection Remix WITHOUT no other custom Kernels with and without installing Gapps. But when I run Chrome ,Maps or Mx Player, it soft reboots itself. And also the internet connnection and calls gets cutoff while downloading files. All Nougat roms that I installed has the same problem. So now I'm running stock rom 6.0.1 rooted and it has not shown any of the above problems. And also the phone lags from time to time on 7.x.x. I am completely hopeless now now. I love nougat. And I'm a big fan of Custom ROMs. Please can you find some other way.
Click to expand...
Click to collapse
Sounds like it's time to revert to stock via fastboot and start clean... Also be aware there is a known issue with LineageOS and others based on it that supplementl GPS data is broken, the fix is delete your APN and re-enter it manually without the "supl" APN type.
Done it.
acejavelin said:
Sounds like it's time to revert to stock via fastboot and start clean... Also be aware there is a known issue with LineageOS and others based on it that supplementl GPS data is broken, the fix is delete your APN and re-enter it manually without the "supl" APN type.
Click to expand...
Click to collapse
Already done fastbooting to stock rom. And then tried installing custom roms but that didn't fix the problems.
acejavelin said:
Sounds like it's time to revert to stock via fastboot and start clean... Also be aware there is a known issue with LineageOS and others based on it that supplementl GPS data is broken, the fix is delete your APN and re-enter it manually without the "supl" APN type.
Click to expand...
Click to collapse
What do you mean by GPS data is broken? What does the APN have to do with GPS. Do phone calls go through?
Thanks, just trying to understand cause I just flashed ViperOS, based on linageOS
melp57 said:
What do you mean by GPS data is broken? What does the APN have to do with GPS. Do phone calls go through?
Thanks, just trying to understand cause I just flashed ViperOS, based on linageOS
Click to expand...
Click to collapse
There is a known issue with how LineageOS handles the APN entries in some cases (not everyone has this problem), specifically regarding APN type "supl" which is short for "Secure User Plane Location" which is location information from your carrier and it's towers which is used by location services (and GPS indirectly). I can't find the raised bug entry, but the fix is to delete your apn and rebuilt it manually, skipping "supl" in the APN Type field, but you still get SUPL data, it comes from "default". Remember that APN Type is used to tell your phone what type of data uses what APN, if a type isn't specified then it uses default (with the notable exception of mms which must be implicitly configured).
But I didn't really intend to make this a crash course in APN's and how they work, just suffice it to say that there is a GPS/Location problem with how LineageOS handles SUPL being configured in an APN... This is temporary and is either fixed or will soon be fixed in LineageOS and will trickle down to other ROM's based on it.
For reference; https://jira.lineageos.org/plugins/servlet/mobile#issue/BUGBASH-248
I have this problem too and it was very frustrating.
Goodluck!
grantdb said:
For reference; https://jira.lineageos.org/plugins/servlet/mobile#issue/BUGBASH-248
I have this problem too and it was very frustrating.
Goodluck!
Click to expand...
Click to collapse
Wow this is great, I think it might fix it. The only thing is - I can't delete the APN for some reason. Rooted with magisk.
NSD said:
Wow this is great, I think it might fix it. The only thing is - I can't delete the APN for some reason. Rooted with magisk.
Click to expand...
Click to collapse
Try making a new entry for APN first. And you have to save the original APN and then you can discard I think.
grantdb said:
Try making a new entry for APN first. And you have to save the original APN and then you can discard I think.
Click to expand...
Click to collapse
You are the best. That's exactly what I did and it worked, thanks a bunch!
NSD said:
You are the best. That's exactly what I did and it worked, thanks a bunch!
Click to expand...
Click to collapse
No problem it drove me nuts trying to figure this out!
I am also facing the same issue but in my case it happens while using all the roms I hv tried many custom roms but faced frequent reboots, most disappointing thing is that it was happening when I was using the stock rom as well.... Can anyone help me on this ... Thanks in advance
sunnyMehra22 said:
I am also facing the same issue but in my case it happens while using all the roms I hv tried many custom roms but faced frequent reboots, most disappointing thing is that it was happening when I was using the stock rom as well.... Can anyone help me on this ... Thanks in advance
Click to expand...
Click to collapse
Not good sign if it happened on stock. The only thing I can think of is do a compete wipe and try start again with original firmware. Maybe there was somthing wrong from the factory. Look here https://forum.xda-developers.com/showthread.php?t=3187750
Ya never know...