Categorizing Kirin SoC into respective architecture
List of ARM SoC: Kirin 910 , Kirin 910T, Kirin 920 , Kirin 925
List of ARM-64 SoC: Kirin 620 , Kirin 930 , Kirin 935 , Kirin 950
Xposed for EMUI 3.1 Android 5.0
arm: http://dl-xda.xposed.info/framework/sdk21/arm/
arm64: http://dl-xda.xposed.info/framework/sdk21/arm64/
Xposed Installer 3.0a4: http://forum.xda-developers.com/showthread.php?t=3034811
Uninstaller: http://dl-xda.xposed.info/framework/uninstaller/
Xposed for EMUI 3.1 Android 5.1.1
arm: http://dl-xda.xposed.info/framework/sdk22/arm/
arm64: http://dl-xda.xposed.info/framework/sdk22/arm64/
Xposed Installer 3.0a4: http://forum.xda-developers.com/showthread.php?t=3034811
Uninstaller: http://dl-xda.xposed.info/framework/uninstaller/
Xposed for EMUI 4.0 Android 6.0
arm: http://dl-xda.xposed.info/framework/sdk23/arm/
arm64: http://dl-xda.xposed.info/framework/sdk23/arm64/
Xposed Installer 3.0a4: http://forum.xda-developers.com/showthread.php?t=3034811
Uninstaller: http://dl-xda.xposed.info/framework/uninstaller/
All Xposed versions later than v86 work flawlessly on Huawei devices with Theme Engine enabled. Thanks to the awesome devs who have made this possible.
All credits goes to @rovo89 and @wanam
That is certainly interesting. I'll have to try it some time. How did you find out that de-odexing the files makes it possible to use Xposed?
See updated OP. No need to disable resource hooks....
That's how Xposed works on most Xperia and Samsung ROMs. Just thought to try it on ours!
it worked for me on my honor 6 android 6.0 B803
and I disabled Huawei theme engine by editing this line
ro.config.hwtheme=0
I found it in
system/emui/base/prop/local.prop
amazing...finally
Sent from my H60-L04 using Tapatalk
hamzio7 said:
it worked for me on my honor 6 android 6.0 B803
and I disabled Huawei theme engine by editing this line
ro.config.hwtheme=0
I found it in
system/emui/base/prop/local.prop
amazing...finally
Sent from my H60-L04 using Tapatalk
Click to expand...
Click to collapse
So editing local.prop achieves same effect. Excellent!
And BTW did you followed my guide?
How does disabling the theme engine affect the look and feel of the UI?
yes...I followed your guide...thank you so much
on android 5.1 you can find this line in the build.prop
Sent from my H60-L04 using Tapatalk
---------- Post added at 04:27 PM ---------- Previous post was at 04:25 PM ----------
micechal said:
How does disabling the theme engine affect the look and feel of the UI?
Click to expand...
Click to collapse
its not so different...only the icons will be on their default form
Sent from my H60-L04 using Tapatalk
micechal said:
How does disabling the theme engine affect the look and feel of the UI?
Click to expand...
Click to collapse
Icons go weird. Looks like if they are from Android Honeycomb
Installing a Custom Launcher however, fixes the issue (as you can use Icon Packs)
Other than that, everything works as expected.
it will look like this
Sent from my H60-L04 using Tapatalk
guys after working with the phone using the xposed framework I realized that the phone is so slower and some apps crash i.e. phone manger
and the overall performance of the phone is very bad..
any idea how to fix it?
Sent from my H60-L04 using Tapatalk
Are you able to measure the performance loss somehow? For example by running some benchmarks. Or do you experience overall slowness rather than raw performance decrease?
Is it the same if you turn the theme engine back on and disable resource hooks?
That slow performance is due to deodexing but should be gone after a boot or two.
However, my phone's performance is the same as before. However, there is one app which crashes i.e. Huawei Swype but I use Google Keyboard instead.
Remember I asked you to create a backup! If there is an app crashing restore the odexed version of that app from backup (not the complete backup).
And BTW Phone Manager works for me
mfbcool said:
That slow performance is due to deodexing but should be gone after a boot or two.
However, my phone's performance is the same as before. However, there is one app which crashes i.e. Huawei Swype but I use Google Keyboard instead.
Remember I asked you to create a backup! If there is an app crashing restore the odexed version of that app from backup (not the complete backup).
And BTW Phone Manager works for me
Click to expand...
Click to collapse
after deodexing every time I restart my phone it shows me the optimizing screen...is it normal???
Swype keyboard works fine for me...
Sent from my H60-L04 using Tapatalk
hamzio7 said:
after deodexing every time I restart my phone it shows me the optimizing screen...is it normal???
Swype keyboard works fine for me...
Sent from my H60-L04 using Tapatalk
Click to expand...
Click to collapse
This should happen only on 1st boot.
However, tell if the boot time is long as it was after you first booted when deodexed.
mfbcool said:
This should happen only on 1st boot.
However, tell if the boot time is long as it was after you first booted when deodexed.
Click to expand...
Click to collapse
No its not as long as the first time... But it takes about one minute...
On which firmware are you?
i am on B803 beta
Is it possible that the problem is only on MM???
I didn't test on 5.1
Sent from my H60-L04 using Tapatalk
hamzio7 said:
No its not as long as the first time... But it takes about one minute...
On which firmware are you?
i am on B803 beta
Is it possible that the problem is only on MM???
I didn't test on 5.1
Sent from my H60-L04 using Tapatalk
Click to expand...
Click to collapse
If boot time is less as compared to the first one, then everything is okay.
I'm on EMUI 4.0 B803 Marshmallow Beta version.
Please confirm if your bluetooth is working...
I restored my backup right now because I have to go somewhere...
I will test it tonight and I will tell you if it works or not
Sent from my H60-L04 using Tapatalk
When I am deleting framework in system partition, immediately my phone switches off and hanging on logo HONOR.
Why this is happening?
Monika25 said:
When I am deleting framework in system partition, immediately my phone switches off and hanging on logo HONOR.
Why this is happening?
Click to expand...
Click to collapse
Are you trying to delete those folders from TWRP or within a live system? You can't delete system files when you are already booted into the system.
mfbcool said:
Are you trying to delete those folders from TWRP or within a live system? You can't delete system files when you are already booted into the system.
Click to expand...
Click to collapse
My fault, I did it on a running system.
And I exactly dont understand what I have to do on this point:
2. Download the apk, uninstaller arm zip and v80-sdk23-arm zip replacing 23 in sdk23 with your Android API level.
Related
Code:
[SIZE="2"]
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
[/SIZE]
What is ODEX and DEODEX?
Android uses application packages, or APKs as they’re normally called, to tell the operating system what app to load and execute. The framework, that contains others packages, with JARs extension, is the first part of the OS that is in /system partition and it is the first one that is loaded when the OS boots up.
Coming back to Android applications, there are two possible routes to follow, based on the fact that each app is comprised of an APK and a cache part that tells the Android Dalvik VMwhat components does the app come with.
The cache for each APK is contained separately in a .odex file, which loads into the Dalvik VM at the time of boot, thus speeding up boot times. (ODEX)
The cache for each APK is contained within the APK itself as a classes.dex file, making the boot times slower as Dalvik VM is built up. (DEODEX)
Now, ideally, most OEMs choose to opt for the first route, for two major reasons. First, it makes modifying the system apps more difficult (making the OS more stable and secure), and two, faster load times for the OS itself, since the cache is built as part of the virtual machine itself. In normal cases, where an Android firmware is odexed the .odex files for each /system APK and JAR are written into the Dalvik VM when the OS boots up. Since these .odex files contain preliminary load information about each system app, the OS knows what to expect when it’s booting up, and consequently, loads all these apps faster. Ultimately, for the user, it means that boot times are significantly sped up, and you can put your device to use much sooner. As opposed to the above, in a deodexed (custom) ROM, there is no cache information within the Dalvik VM at the time of boot, so when the system status up, it only gets to know which files to load once the /system partition APKs and JARs are actively accessed. This, in effect, will result in a much longer boot time, since each APK and JAR will be processed one by one, and you will be able to use your device long after you’ve powered it up. In real life, that’s not the case. With deodexed ROMs, only the first ever boot after clearing Dalvik-cache is slower, and all subsequent ones will be the same as any odexed ROM. This is owing to the fact that during the first boot, all cache information is written to the virtual machine anyway, and hence, it will behave as any other firmware (until you clear the Dalvik-cache once again). While an odexed firmware is faster and more secure, a deodexed one gives more modification freedom, and is the only way possible to change the look and feel of system apps.
Summary of ODEXED ROM
It's fast to open system app, has more stability and more battery life, uses less RAM than DEODEXED ROM but it's a little bit complex to customize APKs and JARs and is a little bit slower to boot up.
Summary of DEODEXED ROM
It's slower than an ODEXED ROM to open system app, has less stability and less battery life, uses badly RAM but it's a "easy" customization of APKs and JARs and is a little bit faster to boot up.
Click to expand...
Click to collapse
What is Odexer Tool?
Odexer Tool (OT) is a script that allow you to odex your ROM in a safety way without using a PC. I worked a lot of time to make it and so if you like it, please give a thanks.
Click to expand...
Click to collapse
What does OT do?
1 -> Odex Framework in /system/framework/*.jar
2 -> Odex Apps in /system/app/*.apk
3 -> Odex Apps in system/priv-app/*.apk
4 -> Remove classes.dex from JARs/APKs (if emabled)
Click to expand...
Click to collapse
Which are the commands of OT?:
frame -> odex all framework
sysapp -> odex all system apps
all -> odex all ROM
set -> enable/disable 'Remove classes.dex'
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Is it safe to ODEX the ROM?
I think that it is dangerous to ODEX the ROM because you are touching Android completely. With OT I made a safety way to ODEX but there us always a possibility to soft brick your device. I suggest you to use it when you are at home with a PC (and not when you are out) if something goes wrong.
Click to expand...
Click to collapse
Is it safe to enable 'Remove classes.dex'?
No, i dangerous because if something goes wrong (for example during framework odex), there is more possibility to soft brick the device but if you have Honey Comb, Ice Cream Sandwich or Jelly Bean you must enable it if you don't want message "Android is upgrading" on every boot.. On KitKat is really dangerous because some older rom (first KitKat built) this option will soft brick at 100% your device.
Click to expand...
Click to collapse
Which Android versions are compatible?
Froyo (2.2.x)
Gingerbread (2.3.x)
Honey Comb (3.x.x)
Ice Cream Sandwich (4.0.x)
Jell Bean (4.1.x, 4.2.x, 4.3.x)
KitKat (4.4.x)
Click to expand...
Click to collapse
What do I need to ODEX?:
I need only 4 things!
First, DEODEXED (or partial) ROM.
Second, custom recovery to flash OT.
Third, some free space in /system (check below).
Fourth, a working brain!
Click to expand...
Click to collapse
How much space do I need to ODEX?:
Framework -> 14% or more of free space in system.
System apps -> 23% or more of free space in system.
All ROM -> 31% or more of free space in system.
Click to expand...
Click to collapse
How can I ODEX my device?
First of all be sure to have a chance to restore everything!
1 -> Download Odexer Tool (link in second post)
2 -> Reboot into recovery
3 -> Install Odexer Tool
4 -> Reboot into system
5 -> Open Terminal Emulator
6 -> Type 'su' to obtain root access
7.a -> Type 'odex' to show possible command/s
8.a -> Type one of the possible command/s that is available
8.a -> Waiting and enjoy!
OR
7.b -> Type 'odex one of the possible command/s' (for example 'odex all')
8.b -> Waiting and enjoy!
Click to expand...
Click to collapse
Follow me here: Odexer Tool Official Community
Download Odexer Tool
Credits:
- @MatrixDJ96 (Me)
- MrTony68 (Beta Tester)
- @Thyrus (Beta Tester)
- @angel.sea (For Support)
- Stericson (For BusyBox)
Reserved aaa
Reserved aa
ohh New beta I'll try
Amazing work! :good:
Successfully odexed everything in 4.4 kitkat on e970 LG Optimus G.
EDIT: "Sorry, you are limited to 8 thanks per day"...... You will get a thanks tomorrow!
Urticant2 said:
ohh New beta I'll try
Click to expand...
Click to collapse
Thanks for support
MiZrY said:
Amazing work! :good:
Successfully odexed everything in 4.4 kitkat on e970 LG Optimus G.
EDIT: "Sorry, you are limited to 8 thanks per day"...... You will get a thanks tomorrow!
Click to expand...
Click to collapse
Are this work on cusrom toucwiz s4?
Sent from my GT-I9500 using Tapatalk 4
Ok now just gapps fc mhhh (i use banks gapps core)
does it work with MIUI too?
Hey Matrix!
What's the difference between this new version and your old script?
Sent from my HTC Desire C using xda app-developers app
Did it and chose all and getting Package Access Helper fcs?
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:37 AM ---------- Previous post was at 03:35 AM ----------
Google Partner Set up fcs! And my browser is fcing? !
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:42 AM ---------- Previous post was at 03:37 AM ----------
Works after a restart! Maybe tell people to restart after its done?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Odexed my cm7 ROM & I straight away saw a performance improvement! Thanks for this awesome & easy script! Also we need to reboot for the changes to take place, add this to the OP.
Sent from my GT-S5830 using Tapatalk 2
Urticant2 said:
Ok now just gapps fc mhhh (i use banks gapps core)
Click to expand...
Click to collapse
Reboot
poczynek said:
Did it and chose all and getting Package Access Helper fcs?
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:37 AM ---------- Previous post was at 03:35 AM ----------
Google Partner Set up fcs! And my browser is fcing? !
Sent from my SM-N9005 using XDA Premium 4 mobile app
---------- Post added at 03:42 AM ---------- Previous post was at 03:37 AM ----------
Works after a restart! Maybe tell people to restart after its done?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh sorry i forgot this part...
I'll add automatic reboot (or hot reboot reboot is the same) in the next version
atomomega said:
Hey Matrix!
What's the difference between this new version and your old script?
Sent from my HTC Desire C using xda app-developers app
Click to expand...
Click to collapse
New style and new option, very simple and fast, added support for kitkat (you can also have an odexed rom 4.4 with working art)
Oops.... nevermind ;p
MatrixDJ96 said:
Reboot
Click to expand...
Click to collapse
After install a new GApps odexed
All work good with ART
Big Thanks MatrixDJ96 for your hard work
Edit: have you planned to add data/app option or costume option ? in futur
Urticant2 said:
After install a new GApps odexed
All work good with ART
Big Thanks MatrixDJ96 for your hard work
Edit: have you planned to add data/app option or costume option ? in futur
Click to expand...
Click to collapse
I will add option to odex a custom partition
This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot
Thanks to everyone in this thread for helping figure this thing out!
Working perfect on liquid smooth rom, thanks for posting this!
Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.
confirm working for d855 on cm11... thanks
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..
Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app
Anyone tested this on CM12 yet?
if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.
Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.
And let us know!
Sent from my LG-D851 using Tapatalk
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.
Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?
rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
KK, LP or MM?
Yes Viper4Android is working on MM. Already using it for almost 24 hours. No problem at all.
Tomogitarist said:
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
Click to expand...
Click to collapse
sachs said:
KK, LP or MM?
Click to expand...
Click to collapse
It works on both Lollipop and Marshmallow. I've tested it on D855 30B stock ROM and also Lollipop 21A stock ROM. Should work with any ROM, even AOSP and CM.
Great help! Does it still needs to set selinux to permisive ?
gado45 said:
Great help! Does it still needs to set selinux to permisive ?
Click to expand...
Click to collapse
No it doesn't. The new version works with kernel set to enforcing as well.
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
darisito said:
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
Click to expand...
Click to collapse
I don't know why you can't find the app. Try deleting the previous one using Titanium if it is installed into system or just uninstall it normally. then try re flashing this zip.
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I guess you have to place the IR sample files into the specific folder right?
Here this will help:
IRS Instructions
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Got to choose "expert" mode from the menu before it works
i tried but not working on cm13
Vivasanti said:
Got to choose "expert" mode from the menu before it works
Click to expand...
Click to collapse
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Gugus38 said:
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
IAM_TheFlash said:
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Click to expand...
Click to collapse
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Vivasanti said:
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Click to expand...
Click to collapse
Thanks! It works for irs but not for DDC folder is empty whereas there profiles in the app..
Regarding the zip, I deleted the whole app and all its folders and it worked, the app then installed to latest version.
Sent from my LG-D855 using Tapatalk
Somehow it doesn't show any effect on LL Stock Rom.
Tried Fx compatible mode, still doesn't work with Stock Music App.
Edit: Works now, forgot to change SELinuxMode
IAM_TheFlash said:
No it doesn't. The new version works with kernel set to enforcing as well.
Click to expand...
Click to collapse
It did not worked without setting the selinux to permissive. Status abnormal said
gado45 said:
It did not worked without setting the selinux to permissive. Status abnormal said
Click to expand...
Click to collapse
On LP you still need a permissive kernel. I'm not sure about MM, although my kernel is indeed set to permissive. I'm on Xceed so that is set to permissive.
Can someone say, what s the best configuration ? I can t find it anywhere.
Hi there. Anyone using xposed on their le1s devices???? Installed xposed yesterday from le 1s official forum but I am unable to see list of modules.
Anyone trying specific modules for 1s, do share here, specifically battery related, coz I guess that's the biggest downside with the 1s
Sent from my ONE E1003 using XDA-Developers mobile app
Xposed installed successfully
Dude i have installed Xposed n using gravitybox n xuimod for animations...
Install xposed installer and flashed the framework zip..it do works but only limited modules are working or u get bootloop..
Try Amplify for me its saving my battery prety well any other help needed rply me
Thanks I wanted to try amplify but currently i have underclocked my device to see battery performance, will definitely try amplify.
The problem I m facing is under downloads, there are no modules, I have to download apk, install it, and then activate it
Previously I mistakenly flashed the wrong xposed zip, can it occur because of this.
Sent from my ONE E1003 using XDA-Developers mobile app
Check to see if download is enabled in the Xposed settings menu. Without it enabled you won't see anything.
If you are running an EUI rom, this is the Xposed Framework you need to flash:
http://dl-xda.xposed.info/framework/sdk21/arm64/xposed-v84-sdk21-arm64.zip
..and then the installer app here: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
If u hv flash wrong zip the module wont work u need to flash xposed-v79-sdk21-arm64..
Download is working no issue with it..try uninstaller and install xposed again but firstly uninstall all ur modules it cause bootloop i hav faced that problm
Amplificator said:
Check to see if download is enabled in the Xposed settings menu. Without it enabled you won't see anything.
If you are running an EUI rom, this is the Xposed Framework you need to flash:
http://dl-xda.xposed.info/framework/sdk21/arm64/xposed-v84-sdk21-arm64.zip
..and then the installer app here: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Click to expand...
Click to collapse
I'll check the settings, xposed is working fyn, no issues wid it, just that download modules are all invisible
Sent from my ONE E1003 using XDA-Developers mobile app
gurgao said:
I'll check the settings, xposed is working fyn, no issues wid it, just that download modules are all invisible
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
I've attached a screenshot of where you can find it.
If I disable "Enable downloads" on my phone, then the download-section will not show anything; it will just be blank.
Amplificator said:
I've attached a screenshot of where you can find it.
If I disable "Enable downloads" on my phone, then the download-section will not show anything; it will just be blank.
Click to expand...
Click to collapse
Yup buddy I had this checked. The problem was I flashed wrong zip file. Yesterday I uninstalled xposed and reflashed correct zip, all is working fine and downloads is also visible.
Btw have u tried lspeed. Installed it today and did some tweeks, will comment on performance in some time
Sent from my ONE E1003 using XDA-Developers mobile app
gurgao said:
Yup buddy I had this checked. The problem was I flashed wrong zip file. Yesterday I uninstalled xposed and reflashed correct zip, all is working fine and downloads is also visible.
Btw have u tried lspeed. Installed it today and did some tweeks, will comment on performance in some time
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
That's why I linked to the correct zip file above
My guess is you flashed the arm32 version, our device is arm64 (64bit)
I enabled a bunch of stuff in lspeed, yes. I havn't done any comparison with and without it though; it's smooth as it is
yeah Lspeed work perfect..
I have vnmod rom installed on my le 1s which comes with inbuild Lspeed app..wroks perfect for me
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
Use gravity box to enable on screen navigation keys..n use navbar music visualizer module..and play music it looks awsome n somthing differnt try it out..
Lazyboy-Summit said:
I have vnmod rom installed on my le 1s which comes with inbuild Lspeed app..wroks perfect for me
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
Use gravity box to enable on screen navigation keys..n use navbar music visualizer module..and play music it looks awsome n somthing differnt try it out..
Click to expand...
Click to collapse
Thanks for the tip, I like pie controls more[emoji2] [emoji2] [emoji2] [emoji2]
Sent from my ONE E1003 using XDA-Developers mobile app
Was using Greenify but switched to Amplify now.
Mostly installed Xposed for YouTube Background but Amplify and LSpeed (About to install) also enticed me.
Try project skynet before installing lspeed, compare both
Sent from my ONE E1003 using XDA-Developers mobile app
Check this xposed module specifically developed for EUI. LeEco EUI Moder. makes your phone look like AOSPworks partially with LeEco 1s
hey ,
i have installed xposed and using virtual sensor module for gyroscope emulator..it works but only problem is that z axis is not working in youtube 360 videos..plz help or any other module which can help...
thanks in advance..
dhruv035 said:
hey ,
i have installed xposed and using virtual sensor module for gyroscope emulator..it works but only problem is that z axis is not working in youtube 360 videos..plz help or any other module which can help...
thanks in advance..
Click to expand...
Click to collapse
VirtualSensor is still in its alpha stage.. dev is still working on it ...
You can try this module. Also http://forum.xda-developers.com/xposed/modules/wip-gyroemu-accelerometer-magnetometer-t3424314 this also still in dev stage
Sent from my Moto G using XDA Labs
reversegear said:
VirtualSensor is still in its alpha stage.. dev is still working on it ...
You can try this module. Also http://forum.xda-developers.com/xposed/modules/wip-gyroemu-accelerometer-magnetometer-t3424314 this also still in dev stage
Click to expand...
Click to collapse
Thanks but i have already tested that..but it's not working..
those who have installed the xposed on letv 1s eco, please try the android n-ify and please let me know, it has all the custom features of android N.
Android N ify is not working for le x509
Hello where can I find it zip file for Android 6.0 ?..
Thanks for helping me.
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Video recording (working but laggy if you want to watch it)
SELinux
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Changelog
Code:
[B]lineage-15.1-20180722-UNOFFICIAL-eagle.zip[/B]
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180707-UNOFFICIAL-eagle.zip[/B]
Fix low volume
Fix livedisplay
Fix kernel local version
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180624-UNOFFICIAL-eagle.zip[/B]
Initial release
Troubleshooting
Video recording
Video recording is broken in stock camera, just install
https://play.google.com/store/apps/details?id=com.simplemobiletools.camera
as workaround for now.
Playstore show not certified
Try to clean app data and cache first, if its not working for any reason read this
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Low RAM Configuration
Add the four lines into your build.prop with any rootexplorer you want, save it and restart your phone to activate them.
Code:
# Low memory device
ro.config.low_ram=true
# Force high-end graphics in low ram mode
persist.sys.force_highendgfx=true
If you need more information read this
https://source.android.com/devices/tech/perf/low-ram#intro
sgspluss said:
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Information
This are unofficial builds made by myself, will fix things, resync and rebuild it if i'll find some free time.
What's working
Mostly everything.
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Click to expand...
Click to collapse
did you fix some problems in this version?
i mean is there any different from the rom BETA 2?
and what abut laging? did you fix it?
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
sgspluss said:
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
Click to expand...
Click to collapse
great news..iam ready for start testing..i will report if i found somthing
hooooossamq said:
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.
Click to expand...
Click to collapse
snap is better because it uses newer drivers and open source (like the rom itself). and there is no point if you add sony camera because it is an AOSP rom, it meant to be pure android (except lineage tweaks)
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
hooooossamq said:
what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
Click to expand...
Click to collapse
Thats not that easy as you think, because need to port this app to the api, but apart of this i want to stay close as possible to lineage.
hooooossamq said:
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
Click to expand...
Click to collapse
Afaik there will be no odex files, if there are one i will change it in next update. To be honest, did not check it.
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Hrustus said:
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
Click to expand...
Click to collapse
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
hooooossamq said:
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Click to expand...
Click to collapse
Are they also present in builds befor?
Sent from my athene using XDA Labs
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Click to expand...
Click to collapse
Unfortunately no, but maybe somebody else remember version. Hmmm... Actually I am not sure that Magisc was working on LineageOS or on Ressurection ROM...
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Are they also present in builds befor?
Sent from my athene using XDA Labs
Click to expand...
Click to collapse
the lag is much more in your bulid..light bar was working in BEAT 2.
style day and night bug was present in BETA 2..
i was test ALPHA 4 before.every thing working of the bug i say before expact the light bar.and its the most smoth version.. its lagy.. but most smother than all
About problem with magisk, we are also unable to install the magisk manager will look into it whats the reason.
About lags and bugs its strange because i am using same sources, as you can read.
If Something not working logs are helpfull otherwise it takes more time to figure out whats wrong.
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Sent from my athene using XDA Labs
sgspluss said:
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Click to expand...
Click to collapse
and here goes my report (very early report, i will add more information)
1-) without gapps, there is some frame dropping in animations and recent apps section (with or without android go mode) but it is same as beta 2, but a bit slower than 8.0 versions. i wonder is there a huge change under the hood between two versions
2-) no lag present in bootanimation, that's unexpected
3-) front camera video works
4-) dark mode works just fine
summary: our device can't handle gapps, that's what i see here. there are minimal frame droppings. also rom is odexed sadly
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Sent from my athene using XDA Labs
sgspluss said:
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Click to expand...
Click to collapse
go optimization is better for our device for sure, but this recent apps lag holds me back. but without go and using microg, rom holds up pretty good actually.
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Sent from my athene using XDA Labs
sgspluss said:
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Click to expand...
Click to collapse
as i said before, i am using rom with low_ram=false, and there is less lag compared to go enabled mode.
hello
Me too "low_ram=false" make my m2 less laggy
Thank you for your work