Database Info

[Q] Gravity Box not working after flashing custom rom

I have used Xperia Z2 and now using S5 rom but in both the cases i am not able to use Gravity box ...As per other members help i have installed it on phone memory even though i am not able to use it . I have tried by clearing data from its app setting still there is problem.
I am getting Following Message:
Gravity box system framework not responding. Exiting...
i have tried using Xblast tools but changes made using it often get RESET after next reboot.
Can this be fixed ?

After installing gravitybox, enable it in xposed installer and reboot. p.s. GB doesnt work fully in S5 rom

ndeogharkar said:
I have used Xperia Z2 and now using S5 rom but in both the cases i am not able to use Gravity box ...As per other members help i have installed it on phone memory even though i am not able to use it . I have tried by clearing data from its app setting still there is problem.
I am getting Following Message:
Gravity box system framework not responding. Exiting...
i have tried using Xblast tools but changes made using it often get RESET after next reboot.
Can this be fixed ?
Click to expand...
Click to collapse
Did u install latest version of xposed apk…. Try to install newer version of xposed and the select gravity box in modules settings
Sent from my Micromax A117 using XDA Free mobile app

TECHVS said:
Did u install latest version of xposed apk…. Try to install newer version of xposed and the select gravity box in modules settings
Sent from my Micromax A117 using XDA Free mobile app
Click to expand...
Click to collapse
Yes i have tried newer versions also but no success. and now Siddhesh has confirm ..i have stopped trying...anyway it is very beautiful rom even without gravity box. so no issues. In fact this is the first custom rom i have been using for more than two weeks and liking it because of it good sound output. Will not change it untill we receive official KITKAT update (If at all) or another best looking rom with equally good sound output.

Quick Remote App for Cyanogenmod 12 Nightly

Credits @sefnap @RieGo, and @zzeneg.​
Want Stock LG QuickRemote App back on your phone? Using Cyanogenmod 12 Nighly Build? This ones for you!​
Tested on AT&T White LG G3 on Mar04 nightly build of Cyanogenmod 12​
Steps:
1. Download file attached below. If one doesn't work, try the other.
2. Reboot to TWRP or Custom Recovery
3. Wipe Dalvik cache and Cache
4. Flash Zip file
5. Reboot
6. Enjoy.
Note that Files for the remote may take a while to load... Be Patient!
If issue arises run this app and reboot Here​
Warning. I am not responsible for any problems that may arise. Note that you should always have a backup for anything you flash!

Wil this work on LG g3 d855? Or is it only for AT&T?

I flashed but there is no manufacturer to select

drtung said:
I flashed but there is no manufacturer to select
Click to expand...
Click to collapse
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app

Does it work on BlissPop?
Sent from my LG-D855

Hgneto said:
Does it work on BlissPop?
Sent from my LG-D855
Click to expand...
Click to collapse
Yup. Version 1 works fine :good:

Updated App?
Is this the updated lollipop version, so i can also control ACs and projectors?

Version 1 is working fine on latest blisspop 3.2
---------- Post added at 06:14 AM ---------- Previous post was at 06:08 AM ----------
mg5000 said:
Is this the updated lollipop version, so i can also control ACs and projectors?
Click to expand...
Click to collapse
There's no ACs and projectors in this version.

Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?

TheHappyBuddhist said:
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
Click to expand...
Click to collapse
You can create your own remote by selecting "+" then "universal remote"
---------- Post added at 09:34 PM ---------- Previous post was at 09:29 PM ----------
Eeuwe said:
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
SE Linux Mode Changer seems to have been removed from Playstore... at least in Belgium...

veronesi.n said:
You can create your own remote by selecting "+" then "universal remote"
Click to expand...
Click to collapse
Tried and working Only thing is that the icons are not as big as stock ones, maybe because of my custom DPI (but the stock remotes are bigger somehow) Anyways, thanks!!

Please HELP
Which is the latest one version 1 or 2? and where is the ac remotes?

Do you have any newer version of that QuickRemote?? I mean operate the projector etc.

Thanks for the app mod, works fine.

You my friend got it and there thousands trying to get this to work on lg g3 aosp ROMs I have been at it an hour and was bout to give up and I found your thread DL the apk after enabling init d and selinux and works perfect everyone needs to know and remove all other thread asking for quixkremote on CM12.1 night lies.
Thank you so so much..............
Sent from my LG-ls990 using XDA Free mobile app

Hi
Also working on LG G2 D802 with CM12.1
Thanks!!!!

Here is version 4.50.19 for anyone who wants it. It has more options for devices to control but overall functionality and design layout of app is the same. If it doesn't install as user app place in system/app/LGQRemote with permissions rw-r--r--
LGQRemote.apk

xlxcrossing file is working fine on CM 13
thanks

ftomas said:
xlxcrossing file is working fine on CM 13
thanks
Click to expand...
Click to collapse
Really? I couldn't get it to work. I'm using Peel Remote from play store it works great.

You HAVE to set SELinux to permissive. It works just fine on CM13... And if you haven't flashed zip before, it can't work.
Sent from my LG-D855 using XDA Free mobile app

[APP] [ROOT] [ZIP Package] Viper4Android v2.4.0.1 for LG G3

Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD

Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.

KK, LP or MM?

Yes Viper4Android is working on MM. Already using it for almost 24 hours. No problem at all.

Tomogitarist said:
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
Click to expand...
Click to collapse
sachs said:
KK, LP or MM?
Click to expand...
Click to collapse
It works on both Lollipop and Marshmallow. I've tested it on D855 30B stock ROM and also Lollipop 21A stock ROM. Should work with any ROM, even AOSP and CM.

Great help! Does it still needs to set selinux to permisive ?

gado45 said:
Great help! Does it still needs to set selinux to permisive ?
Click to expand...
Click to collapse
No it doesn't. The new version works with kernel set to enforcing as well.

I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?

I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk

darisito said:
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
Click to expand...
Click to collapse
I don't know why you can't find the app. Try deleting the previous one using Titanium if it is installed into system or just uninstall it normally. then try re flashing this zip.

Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I guess you have to place the IR sample files into the specific folder right?
Here this will help:
IRS Instructions

Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Got to choose "expert" mode from the menu before it works

i tried but not working on cm13

Vivasanti said:
Got to choose "expert" mode from the menu before it works
Click to expand...
Click to collapse
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk

Gugus38 said:
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
IAM_TheFlash said:
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Click to expand...
Click to collapse
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0

Vivasanti said:
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Click to expand...
Click to collapse
Thanks! It works for irs but not for DDC folder is empty whereas there profiles in the app..
Regarding the zip, I deleted the whole app and all its folders and it worked, the app then installed to latest version.
Sent from my LG-D855 using Tapatalk

Somehow it doesn't show any effect on LL Stock Rom.
Tried Fx compatible mode, still doesn't work with Stock Music App.
Edit: Works now, forgot to change SELinuxMode

IAM_TheFlash said:
No it doesn't. The new version works with kernel set to enforcing as well.
Click to expand...
Click to collapse
It did not worked without setting the selinux to permissive. Status abnormal said

gado45 said:
It did not worked without setting the selinux to permissive. Status abnormal said
Click to expand...
Click to collapse
On LP you still need a permissive kernel. I'm not sure about MM, although my kernel is indeed set to permissive. I'm on Xceed so that is set to permissive.

Can someone say, what s the best configuration ? I can t find it anywhere.

Xposed Working Modules [OP3]

Since early release from PurifyOS Team of working Xposed Framework (https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221).
All credits to them
I have decided to share working modules in OP3.
For me at this point i have working:
- MinMinGuard
- YouTube Adaway
- Statusbar download progress
- Native Clipboard
- YouTube background playback
- Fingerprint enabler
- Amplify as system app (system/priv-app)
- GravityBox
- Xposed One Tap Video Download
OP3 Open 20.
Share yours...

xui mods works but crash some apps
Gboard nsfw working fine

Also Xinsta module for Instagram works fine.

Flat Style Bars Indicators works fine

Has Anyone tried Snapprefs?
Sent from my OnePlus3 using XDA Labs

Powernap working, greenify didn't work
Sent from my ONEPLUS A3003 using Tapatalk

Fingerprint enabler works too

Does gravitybox or some similar app work, especially for ROMs like PA ?

Anyone facing issue with nav keys not responding....

jocaboss said:
I have decided to share working modules in OP3.
For me at this point i have working:
- MinMinGuard
- YouTube Adaway
- Statusbar download progress
- Native Clipboard
Share yours...
Click to expand...
Click to collapse
Have you tried Gravity Box in stock ROM?

Normas Interruptor said:
Have you tried Gravity Box in stock ROM?
Click to expand...
Click to collapse
Not yet man

jocaboss said:
Not yet man
Click to expand...
Click to collapse
Mainly i missed GB module... ?

Any one try xstana and xbattery themer

does it work on resurrection remix ??

HowGiveLolli is working too.

​
Prattham said:
Has Anyone tried Snapprefs?
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Tried it and snapchat keeps crashing ones you activate it..

REiced said:
​
Tried it and snapchat keeps crashing ones you activate it..
Click to expand...
Click to collapse
Last version of snapchat that was supported: SC 9.39.5.0 anything newer might not work

liam_davenport said:
Last version of snapchat that was supported: SC 9.39.5.0 anything newer might not work
Click to expand...
Click to collapse
That's the one I'm using, also tried to roll back to 9.21.1.0 with sp 165 and no yoy..
Edit: tried both oos beta 20 and experienceos

Guys share the rom you are running when you update the list of modules working. Thank you.

ajithms said:
Guys share the rom you are running when you update the list of modules working. Thank you.
Click to expand...
Click to collapse
OP updated... Thanks

[GCam] complete Google camera (gcam) setup for Mi A1 for Rooted Users

credit : @Arnova8G2 (XDA senior member) and XDA developers
If your not rooted your device . You need to root your device by following the below vedio
This is for latest Jan security patch Oreo rooting
Do subscribe by channel for more information regarding mi A1 rooting ,gcam ,unrooting and all related vedios on mi A1
Link for the vedio [ follow this only if your not rooted ] :
procedure for google camera installation for rooted users only
vedio tutorial for google camera setup : https://youtu.be/w6U_4WeRhNY
1 ) install gcam apk fromm below link
https://drive.google.com/file/d/1ei13dPp_oUblkXrEAqT9UDNhPdtH0F67/view?usp=drivesdk
2 ) there are 4 modules in below download all 4 modules
https://drive.google.com/folderview?id=1Wii2HvOzxwEX7pR74iBXrvOWo5anN8zV
3) add those 4 modules by using magisk in module section
4)open gcam and change settings gcam as below link
https://photos.app.goo.gl/OZS6v2JUE2Z0zSyb2
Reboot your device then it will work
Optional step for Getting Ar Stickers like pixel
download below 2 modules from link for Ar Stickers
https://drive.google.com/folderview?id=14Oq69eTDuEmXLWZH6GgyG2XzzH5W34x-
then add those 2 modules using magisk in module section
then reboot your device
My YouTube channel : https://www.youtube.com/channel/UCWb9Oip9bRP_Js7SufgUn9Q
Do subscribe for more related vedios on mi A1 and technical vedios

Thank you,,
Btw is any modules to show on screen navbar and disable hw navbar button?
Sorry if OOT

chalzz said:
Thank you,,
Btw is any modules to show on screen navbar and disable hw navbar button?
Sorry if OOT
Click to expand...
Click to collapse
i dont have any modules for that i will let you know if i got to know

Works great, kinda disappointed tho that i bought mi a1 now that u can get portrait mode on any phone and get better portrait pics than the 12 mpix from xiaomi mi a1. Only reason i bought mi a1...

Hi, is it for oreo?
Prop tweaks module causes bootloop on oreo

bzhwindtalker said:
Hi, is it for oreo?
Prop tweaks module causes bootloop on oreo
Click to expand...
Click to collapse
It is for Oreo
It won't go to bootloop
Working perfectly

SrikanthMergu said:
procedure for google camera installation for rooted users only
1 ) install gcam apk fromm below link
https://drive.google.com/file/d/1ei13dPp_oUblkXrEAqT9UDNhPdtH0F67/view?usp=drivesdk
2 ) there are 4 modules in below download all 4 modules
https://drive.google.com/folderview?id=1Wii2HvOzxwEX7pR74iBXrvOWo5anN8zV
3) add those 4 modules by using magisk in module section
4)open gcam and change settings gcam as below link
https://photos.app.goo.gl/OZS6v2JUE2Z0zSyb2
Reboot your device then it will work
Optional step for Getting Ar Stickers like pixel
download below 2 modules from link for Ar Stickers
https://drive.google.com/folderview?id=14Oq69eTDuEmXLWZH6GgyG2XzzH5W34x-
then add those 2 modules using magisk in module section
then reboot your device
Click to expand...
Click to collapse
While flashing modules ....... Showing error lyk this ....... How to solve already magisk V15.0 installed !!!

Ayush061 said:
While flashing modules ....... Showing error lyk this ....... How to solve already magisk V15.0 installed !!!
Click to expand...
Click to collapse
Did you rooted you Device completely
Again install magisk from that magisk management app
Tap on install
Select direct install recommend one
Then try once again you will get

SrikanthMergu said:
Did you rooted you Device completely
Again install magisk from that magisk management app
Tap on install
Select direct install recommend one
Then try once again you will get
Click to expand...
Click to collapse
Yes rooted completely
I installed via twrp (only booting)
No option to install or direct install only update magisk manager and uninstall

Ayush061 said:
Yes rooted completely
I installed via twrp (only booting)
No option to install or direct install only update magisk manager and uninstall
Click to expand...
Click to collapse
Update magisk manager then
Are you on nougat or Oreo

SrikanthMergu said:
Update magisk manager then
Are you on nougat or Oreo
Click to expand...
Click to collapse
Nougat ........ As xposed framework is still not available for Oreo ??? ........ Any idea when it released ? ....... 95% complete bt ....... Don't knw !

Ayush061 said:
Nougat ........ As xposed framework is still not available for Oreo ??? ........ Any idea when it released ? ....... 95% complete bt ....... Don't knw !
Click to expand...
Click to collapse
I don't have idea about xposed modules
Did you succeeded doing that
I tested this only on Oreo

SrikanthMergu said:
I don't have idea about xposed modules
Did you succeeded doing that
I tested this only on Oreo
Click to expand...
Click to collapse
Nop ...... Not till nw ........ I updated manager but still same installation failed !!! Same error

Ayush061 said:
Nop ...... Not till nw ........ I updated manager but still same installation failed !!! Same error
Click to expand...
Click to collapse
So this procedure is only for Oreo magisk then
Try after upgrading to Oreo bro then

I confirm it works without issues.
Using previous modules for Oreo i was not able to use the slow motion mode.
With this set of modules it can record vidéo however it is very laggy both on the preview and recorded video.
When i select Nexus 6p or another from the first parameter menu the sceen stays black, with Nexus 6 auto only it works.

bzhwindtalker said:
I confirm it works without issues.
Using previous modules for Oreo i was not able to use the slow motion mode.
With this set of modules it can record vidéo however it is very laggy both on the preview and recorded video.
When i select Nexus 6p or another from the first parameter menu the sceen stays black, with Nexus 6 auto only it works.
Click to expand...
Click to collapse
It works good
See the settings attached image in the procedure
Select nexus 6p

You are right when using gcam modded 1.2 I Can select 6p (i was on 1.5 beta) , however slow motion still laggy.

bzhwindtalker said:
You are right when using gcam modded 1.2 I Can select 6p (i was on 1.5 beta) , however slow motion still laggy.
Click to expand...
Click to collapse
Yeah
But selfie portrait works fine
Yeah sometimes everything can't be done

Thanks bro.. will try newer version of gcam

Stickers stop working after some time, to make them working again i m having to restart my device and after some time same thing happens, how to fix it?!