Credits @sefnap @RieGo, and @zzeneg.
Want Stock LG QuickRemote App back on your phone? Using Cyanogenmod 12 Nighly Build? This ones for you!
Tested on AT&T White LG G3 on Mar04 nightly build of Cyanogenmod 12
Steps:
1. Download file attached below. If one doesn't work, try the other.
2. Reboot to TWRP or Custom Recovery
3. Wipe Dalvik cache and Cache
4. Flash Zip file
5. Reboot
6. Enjoy.
Note that Files for the remote may take a while to load... Be Patient!
If issue arises run this app and reboot Here
Warning. I am not responsible for any problems that may arise. Note that you should always have a backup for anything you flash!
Wil this work on LG g3 d855? Or is it only for AT&T?
I flashed but there is no manufacturer to select
drtung said:
I flashed but there is no manufacturer to select
Click to expand...
Click to collapse
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Does it work on BlissPop?
Sent from my LG-D855
Hgneto said:
Does it work on BlissPop?
Sent from my LG-D855
Click to expand...
Click to collapse
Yup. Version 1 works fine :good:
Updated App?
Is this the updated lollipop version, so i can also control ACs and projectors?
Version 1 is working fine on latest blisspop 3.2
---------- Post added at 06:14 AM ---------- Previous post was at 06:08 AM ----------
mg5000 said:
Is this the updated lollipop version, so i can also control ACs and projectors?
Click to expand...
Click to collapse
There's no ACs and projectors in this version.
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
TheHappyBuddhist said:
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
Click to expand...
Click to collapse
You can create your own remote by selecting "+" then "universal remote"
---------- Post added at 09:34 PM ---------- Previous post was at 09:29 PM ----------
Eeuwe said:
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
SE Linux Mode Changer seems to have been removed from Playstore... at least in Belgium...
veronesi.n said:
You can create your own remote by selecting "+" then "universal remote"
Click to expand...
Click to collapse
Tried and working Only thing is that the icons are not as big as stock ones, maybe because of my custom DPI (but the stock remotes are bigger somehow) Anyways, thanks!!
Please HELP
Which is the latest one version 1 or 2? and where is the ac remotes?
Do you have any newer version of that QuickRemote?? I mean operate the projector etc.
Thanks for the app mod, works fine.
You my friend got it and there thousands trying to get this to work on lg g3 aosp ROMs I have been at it an hour and was bout to give up and I found your thread DL the apk after enabling init d and selinux and works perfect everyone needs to know and remove all other thread asking for quixkremote on CM12.1 night lies.
Thank you so so much..............
Sent from my LG-ls990 using XDA Free mobile app
Hi
Also working on LG G2 D802 with CM12.1
Thanks!!!!
Here is version 4.50.19 for anyone who wants it. It has more options for devices to control but overall functionality and design layout of app is the same. If it doesn't install as user app place in system/app/LGQRemote with permissions rw-r--r--
LGQRemote.apk
xlxcrossing file is working fine on CM 13
thanks
ftomas said:
xlxcrossing file is working fine on CM 13
thanks
Click to expand...
Click to collapse
Really? I couldn't get it to work. I'm using Peel Remote from play store it works great.
You HAVE to set SELinux to permissive. It works just fine on CM13... And if you haven't flashed zip before, it can't work.
Sent from my LG-D855 using XDA Free mobile app
Related
This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot
Thanks to everyone in this thread for helping figure this thing out!
Working perfect on liquid smooth rom, thanks for posting this!
Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.
confirm working for d855 on cm11... thanks
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..
Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app
Anyone tested this on CM12 yet?
if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.
Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.
And let us know!
Sent from my LG-D851 using Tapatalk
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.
Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?
rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times
Thanks for support guy's
3MinitBattery 4G Icon Changed LTE V1
https://mega.nz/#!eY1V1S7K!lm7T_aRC6pFwRYf2UxpdHjN0miesphL-z_orE86yOTM
Systemui 4G Icon Changed LTE
http://forum.xda-developers.com/showpost.php?p=63511617&postcount=20
Kernel Synapse full support from @Pafcholini
Link:https://mega.nz/#!ec13XLbD!Dbof6xBxykklgRS4eLfo-4RlfVhY5n4p9VG4yizhvsA
3MinitBattery Mod
Link:https://mega.nz/#!vFlnFaxQ!000Mn0WE283FVbG9yG3jiK9qbJqnrYmXQfl0NTyrKX8
Xposed
Link:http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Viper4Android Fx
Link:
Can't wait to flash this.
Firmware 5.0.1 BOD7 PLEASE LİNK (MEGAUPLOAD OR VERYFAST )
I flashed the files younhad on the other thread last night. I love what you put together here. Great work bro!
Beta online....
Features sounds exciting. ... any screenshots of this rom?
Sent from my SM-N915T3 using XDA Free mobile app
Edge Screen working with this?
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
Downloading to flash now....cant wait
This is fantastic...I love it...the only thing that I cant do is get themes like in the port. I need that Note 5 theme store
Before I wipe, is the edge panel included in this version?
shadezero said:
Before I wipe, is the edge panel included in this version?
Click to expand...
Click to collapse
Yep
Sent from my SM-N915T using Tapatalk
jmichaels1982 said:
Yep
Sent from my SM-N915T using Tapatalk
Click to expand...
Click to collapse
Confirmed. Thank you!
Have you tried installing XPOSED yet?
Not sure which to pick, ARM64 or regular.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
shadezero said:
Confirmed. Thank you!
Have you tried installing XPOSED yet?
Not sure which to pick, ARM64 or regular.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Click to expand...
Click to collapse
Regular and working fine here
Airtioteclint said:
Regular and working fine here
Click to expand...
Click to collapse
Awesome, so download:
XPOSED Installer from Link: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Install it.
Go to TWRP/CWM and Flash: xposed-v75.6-sdk22-arm-custom-build-by-wanam-20151026.zip
-Correct?
shadezero said:
Awesome, so download:
XPOSED Installer from Link: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Install it.
Go to TWRP/CWM and Flash: xposed-v75.6-sdk22-arm-custom-build-by-wanam-20151026.zip
-Correct?
Click to expand...
Click to collapse
Yup. :good:
Awesome to see that everyone is having success with the rom making me so excited about it coming to sprint.
Airtioteclint said:
Yup. :good:
Click to expand...
Click to collapse
Awesome! Thank you.
Confirmed working here as well.
This ROM is working superb.
Only real missing feature for TMO is wifi calling/texting.
Yes tmo wifi calling, volte need to fix and need to change some builp.prop code..
ı dont have tmobile phone , We work together @wcoast and @jmichaels1982 thank you...
All errors will be corrected next time...
i try to theme center from note 5 i edited framework and services.jar...
theme center works download theme %100 apply theme %40 then phonee bootloop i think some app blocked i dont know ...
shadezero said:
Awesome! Thank you.
Confirmed working here as well.
This ROM is working superb.
Only real missing feature for TMO is wifi calling/texting.
Click to expand...
Click to collapse
I have EVERYTHING working! Loving it very much.. the only thing I found is Not to put to many apps in the S-Pen Launcher or you cant uninstall them. The settings button didnt work and I cant get the theme store so I added it from EchoeRom. It shows up now but the themes wont sync. So now on the botton of the Home Pages it shows Themes are there. I have 4 of theme but cant install them or get the theme app/apk to sync with this Store Version I guess. I loaded it and set the permissions in a folder I made in the systems apps and in priv/apps. If anyone can get themes PLEASE let me know. Thats ALL I need and Im 100%
Systemui 4G Icon Changed LTE
Flash TWRP
V1 Link : https://mega.nz/#!GUlHyJAY!zBBfr1WNvsJx8Ig-aGXwwrofThMq_J3EIsnEqGN5cWg
V2 Link : https://mega.nz/#!bI92FY6a!ctjUX6Vb5WasSGBD9BLZbU26Ez5khcYJYHbl7m7PWik
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
KK, LP or MM?
Yes Viper4Android is working on MM. Already using it for almost 24 hours. No problem at all.
Tomogitarist said:
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
Click to expand...
Click to collapse
sachs said:
KK, LP or MM?
Click to expand...
Click to collapse
It works on both Lollipop and Marshmallow. I've tested it on D855 30B stock ROM and also Lollipop 21A stock ROM. Should work with any ROM, even AOSP and CM.
Great help! Does it still needs to set selinux to permisive ?
gado45 said:
Great help! Does it still needs to set selinux to permisive ?
Click to expand...
Click to collapse
No it doesn't. The new version works with kernel set to enforcing as well.
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
darisito said:
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
Click to expand...
Click to collapse
I don't know why you can't find the app. Try deleting the previous one using Titanium if it is installed into system or just uninstall it normally. then try re flashing this zip.
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I guess you have to place the IR sample files into the specific folder right?
Here this will help:
IRS Instructions
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Got to choose "expert" mode from the menu before it works
i tried but not working on cm13
Vivasanti said:
Got to choose "expert" mode from the menu before it works
Click to expand...
Click to collapse
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Gugus38 said:
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
IAM_TheFlash said:
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Click to expand...
Click to collapse
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Vivasanti said:
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Click to expand...
Click to collapse
Thanks! It works for irs but not for DDC folder is empty whereas there profiles in the app..
Regarding the zip, I deleted the whole app and all its folders and it worked, the app then installed to latest version.
Sent from my LG-D855 using Tapatalk
Somehow it doesn't show any effect on LL Stock Rom.
Tried Fx compatible mode, still doesn't work with Stock Music App.
Edit: Works now, forgot to change SELinuxMode
IAM_TheFlash said:
No it doesn't. The new version works with kernel set to enforcing as well.
Click to expand...
Click to collapse
It did not worked without setting the selinux to permissive. Status abnormal said
gado45 said:
It did not worked without setting the selinux to permissive. Status abnormal said
Click to expand...
Click to collapse
On LP you still need a permissive kernel. I'm not sure about MM, although my kernel is indeed set to permissive. I'm on Xceed so that is set to permissive.
Can someone say, what s the best configuration ? I can t find it anywhere.
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
can you extract Boxer email from the c-apps of COS13...
really need that app
nulogic said:
can you extract Boxer email from the c-apps of COS13...
really need that app
Click to expand...
Click to collapse
Sorry, this post is only for TrueCaller integrated. See you in this forum http://forum.xda-developers.com/android/development/c-apps-modded-cyanogen-os-c-apps-cm13-t3254865/post67207838#post67207838
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
TheQuarterMile said:
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
Click to expand...
Click to collapse
Yes, it´s working for me. But you make all of the steeps of the first post... :bueno:
Did the above and got it to work on my OnePlusOne running Temaesk ROM. Just one question... I can't seem to find the option for vibrate on answer and hangup... Is it there?
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
I managed to get this done by flashing only one zip.
I updated the c-apps thread because there are more people in there.
if you want, you can can update the steps, if everything working for you.
Thanks, worked perfectly
There was already a time searching for these mods!
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
Is there any way to install the dialer on rooted stock Marshmallow?
kushalchauhan98 said:
Is there any way to install the dialer on rooted stock Marshmallow?
Click to expand...
Click to collapse
I don't know. This is for CM13 and CM13 based roms.
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
kunalshah912 said:
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
Click to expand...
Click to collapse
Thanks for the info. I'll upload soon again.
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
After I've tried to enable true caller for the dealer I've got an error
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
arvindgr said:
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
Click to expand...
Click to collapse
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Click to expand...
Click to collapse
Yeah It just worked fine for me. Give that a try...
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
sanangel said:
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Ibuprophen said:
sanangel said:
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Can I ask you what has worked?
Click to expand...
Click to collapse
sanangel said:
Can I ask you what has worked?
Click to expand...
Click to collapse
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
These are the Steps i took:
1) I Installed the "Cyanogen Account" app. Then i log into it.
2) I then i Installed the "Truecaller" app. Then i did not open it, nor did anything else, till I completed Step 5.
3) I then booted into Recovery and flashed the "Dialer" zip file. I then cleared the Dalvik Cache and rebooted the device.
4) After the bootup has completed, right away, I then went into:
I first entered the System "Settings" menu
--> Apps/Applications
--> selected the gear on the top right that placed me in the "Configure Apps" screen
--> i then selected "Default App"
--> i then selected "Phone App"
--> i then selected the blue "Phone" (which is probably the only one there to choose from)
--> then i then exited the System "Settings" menu.
5) Now you open the "Dialer" and then a "Truecaller" popup will appear. Select the "Yes" option. Then another popup will appear with an option to select the "Cyanogen" account. You will then select your email address (FYI... your email address is the username of your "Cyanogen" account). Once your email is selected, you will then proceed. Now just sit back and do nothing (as it will have your devices phone number already and will confirm it on it's own). Once you see the confirmation, you will then select the option to proceed.
CONGRATULATIONS!
You are now all set with Truecaller.
I hope my instructions are understandable.
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
Good Luck!!!
Sent from my Samsung SCH-I535 using XDA Labs
Closed permanently.
This is a pretty new rom originally for the Nexus 6P I believe, that I built for the Moto G Falcon and the E 2nd Gen Surnia. It was pretty solid on them, so here it is for the E4. I used the (very impressive) repos @squid2 posted since knowing who is working on them, it'll be the way things go for this device. It will also be easier fixing things and making pull requests. Please post proper logs for any bugs you find so I can go about fixing them. I want to know who has a data connection and who doesn't and what carrier you have so we can get everyone with working data. I don't get a data connection on my Boost model yet so I can't keep a custom rom installed very long to test things. I have to kids and a wife, so that doesn't work out so well. Enjoy!
Bugs:
1. In call audio is not working yet.
2. No data on Boost Mobile variant, maybe others let me know your carrier/device model and if you have data or not.
3. Video playback isn't working unless you flash the attached zip
4. You tell me.
Screenshots
Sent from my Moto E (4) using XDA Labs
So flashing went fine. When I attempted to alter the APN the cellular network icon flashed rapidly. For some reason, it reverted to my old number in the Phone's information area. I am unable to use SCRTN and not sure if there is an alternate method of resetting such information as of yet. I am reverting it to stock and trying to see if I can get it to store my new number as I'm not sure if I can properly see about obtaining data access with it being the old number.
So I re-loaded my stock backup and did SCRTN. I re-flashed this ROM and set the APN to the included Sprint one and now I have 3G data. The Boost APN settings don't give me diddly.
Video playback
Great to see others building for this device.
I haven’t tried your build, but assuming it behaves similarly to my LineageOS test builds, it probably has issues with playing some videos using the source built libOmxVdec. Just as a heads up to you and anyone else trying to build ROMs for this device, you need the following patch to fix the source built libOmxVdec on MSM8917/8920: https://review.lineageos.org/#/c/193267/
My plan for the next week is to fix call audio and bring suppport for fingerprint sensor swipe gestures (similar to the stock ROM).
squid2 said:
Great to see others building for this device.
I haven’t tried your build, but assuming it behaves similarly to my LineageOS test builds, it probably has issues with playing some videos using the source built libOmxVdec. Just as a heads up to you and anyone else trying to build ROMs for this device, you need the following patch to fix the source built libOmxVdec on MSM8917/8920: https://review.lineageos.org/#/c/193267/
My plan for the next week is to fix call audio and bring suppport for fingerprint sensor swipe gestures (similar to the stock ROM).
Click to expand...
Click to collapse
Nice, thanks for the heads-up. I didn't want to build los and step on your toes and I've got plenty of other sources already. I assume your going to make los official for perry. I'm looking forward to a perry squid kernel.
Sent from my Moto E (4) using XDA Labs
Here's a temporary fix for the video play back issue. Just flash it in recovery.
Sent from my Moto E (4) using XDA Labs
I have great signal with MetroPCS however there's no audio in calls, the calls work but the audio on either end doesn't.
KyleBryant said:
I have great signal with MetroPCS however there's no audio in calls, the calls work but the audio on either end doesn't.
Click to expand...
Click to collapse
Can you post a log please?
Sent from my Moto E (4) using XDA Labs
amarc78 said:
Can you post a log please?
Click to expand...
Click to collapse
How would I go about providing such log?
KyleBryant said:
How would I go about providing such log?
Click to expand...
Click to collapse
Download this: https://play.google.com/store/apps/details?id=com.tortel.syslog
Open the app, grant it su permissions then reboot your phone and as soon as it reboots make a call and then while the call is still connected, go to Syslog and click take log. Then upload the zip it outputs in the syslog folder on your sdcard. I ask to reboot the phone so the logs are as short as possible to have to look through.
Sent from my Moto E (4) using XDA Labs
Here ya go https://drive.google.com/file/d/0Bzk7IAINn5jfMzlaTFU1cG54TTQ/view?usp=drivesdk
---------- Post added at 11:05 PM ---------- Previous post was at 10:52 PM ----------
It's still quite a lot lol
KyleBryant said:
Here ya go https://drive.google.com/file/d/0Bzk7IAINn5jfMzlaTFU1cG54TTQ/view?usp=drivesdk
---------- Post added at 11:05 PM ---------- Previous post was at 10:52 PM ----------
It's still quite a lot lol
Click to expand...
Click to collapse
Thanks. The length logs can be is why a lot of devs and maintainers won't accept a log unless it only contains the part with the error. You can check out something like this: https://forum.xda-developers.com/showthread.php?t=1726238 There's another good one I can't find atm.
Sent from my Moto E (4) using XDA Labs
The theme support for this rom works absolutely flawless also.... Would Xposed work on this? Or should I just stick with magisk?
KyleBryant said:
The theme support for this rom works absolutely flawless also.... Would Xposed work on this? Or should I just stick with magisk?
Click to expand...
Click to collapse
I haven't tried, so I can't say. I don't see why it wouldn't though. You could always try the Magisk Xposed.
Sent from my Moto E (4) using XDA Labs
amarc78 said:
I haven't tried, so I can't say. I don't see why it wouldn't though. You could always try the Magisk Xposed.
Click to expand...
Click to collapse
Eh there's really no need, adblock and greenify work with magisk, and I don't need gravity box because this rom has almost everything I need.
Its good to see a dev working on this device. I don't have the variant this will work on but am very happy to see it being worked on. Keep up the good work.
Xposed systemless works great, I'm about to be testing out resurrection now.
this one is my favorite out of all of them so im gonna keep using it. i hope the call problem gets sorted eventually.