Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
KK, LP or MM?
Yes Viper4Android is working on MM. Already using it for almost 24 hours. No problem at all.
Tomogitarist said:
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
Click to expand...
Click to collapse
sachs said:
KK, LP or MM?
Click to expand...
Click to collapse
It works on both Lollipop and Marshmallow. I've tested it on D855 30B stock ROM and also Lollipop 21A stock ROM. Should work with any ROM, even AOSP and CM.
Great help! Does it still needs to set selinux to permisive ?
gado45 said:
Great help! Does it still needs to set selinux to permisive ?
Click to expand...
Click to collapse
No it doesn't. The new version works with kernel set to enforcing as well.
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
darisito said:
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
Click to expand...
Click to collapse
I don't know why you can't find the app. Try deleting the previous one using Titanium if it is installed into system or just uninstall it normally. then try re flashing this zip.
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I guess you have to place the IR sample files into the specific folder right?
Here this will help:
IRS Instructions
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Got to choose "expert" mode from the menu before it works
i tried but not working on cm13
Vivasanti said:
Got to choose "expert" mode from the menu before it works
Click to expand...
Click to collapse
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Gugus38 said:
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
IAM_TheFlash said:
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Click to expand...
Click to collapse
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Vivasanti said:
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Click to expand...
Click to collapse
Thanks! It works for irs but not for DDC folder is empty whereas there profiles in the app..
Regarding the zip, I deleted the whole app and all its folders and it worked, the app then installed to latest version.
Sent from my LG-D855 using Tapatalk
Somehow it doesn't show any effect on LL Stock Rom.
Tried Fx compatible mode, still doesn't work with Stock Music App.
Edit: Works now, forgot to change SELinuxMode
IAM_TheFlash said:
No it doesn't. The new version works with kernel set to enforcing as well.
Click to expand...
Click to collapse
It did not worked without setting the selinux to permissive. Status abnormal said
gado45 said:
It did not worked without setting the selinux to permissive. Status abnormal said
Click to expand...
Click to collapse
On LP you still need a permissive kernel. I'm not sure about MM, although my kernel is indeed set to permissive. I'm on Xceed so that is set to permissive.
Can someone say, what s the best configuration ? I can t find it anywhere.
Related
This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot
Thanks to everyone in this thread for helping figure this thing out!
Working perfect on liquid smooth rom, thanks for posting this!
Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.
confirm working for d855 on cm11... thanks
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..
Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app
Anyone tested this on CM12 yet?
if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.
Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.
And let us know!
Sent from my LG-D851 using Tapatalk
if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.
Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk
Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?
rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times
Credits @sefnap @RieGo, and @zzeneg.
Want Stock LG QuickRemote App back on your phone? Using Cyanogenmod 12 Nighly Build? This ones for you!
Tested on AT&T White LG G3 on Mar04 nightly build of Cyanogenmod 12
Steps:
1. Download file attached below. If one doesn't work, try the other.
2. Reboot to TWRP or Custom Recovery
3. Wipe Dalvik cache and Cache
4. Flash Zip file
5. Reboot
6. Enjoy.
Note that Files for the remote may take a while to load... Be Patient!
If issue arises run this app and reboot Here
Warning. I am not responsible for any problems that may arise. Note that you should always have a backup for anything you flash!
Wil this work on LG g3 d855? Or is it only for AT&T?
I flashed but there is no manufacturer to select
drtung said:
I flashed but there is no manufacturer to select
Click to expand...
Click to collapse
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Does it work on BlissPop?
Sent from my LG-D855
Hgneto said:
Does it work on BlissPop?
Sent from my LG-D855
Click to expand...
Click to collapse
Yup. Version 1 works fine :good:
Updated App?
Is this the updated lollipop version, so i can also control ACs and projectors?
Version 1 is working fine on latest blisspop 3.2
---------- Post added at 06:14 AM ---------- Previous post was at 06:08 AM ----------
mg5000 said:
Is this the updated lollipop version, so i can also control ACs and projectors?
Click to expand...
Click to collapse
There's no ACs and projectors in this version.
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
TheHappyBuddhist said:
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
Click to expand...
Click to collapse
You can create your own remote by selecting "+" then "universal remote"
---------- Post added at 09:34 PM ---------- Previous post was at 09:29 PM ----------
Eeuwe said:
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
SE Linux Mode Changer seems to have been removed from Playstore... at least in Belgium...
veronesi.n said:
You can create your own remote by selecting "+" then "universal remote"
Click to expand...
Click to collapse
Tried and working Only thing is that the icons are not as big as stock ones, maybe because of my custom DPI (but the stock remotes are bigger somehow) Anyways, thanks!!
Please HELP
Which is the latest one version 1 or 2? and where is the ac remotes?
Do you have any newer version of that QuickRemote?? I mean operate the projector etc.
Thanks for the app mod, works fine.
You my friend got it and there thousands trying to get this to work on lg g3 aosp ROMs I have been at it an hour and was bout to give up and I found your thread DL the apk after enabling init d and selinux and works perfect everyone needs to know and remove all other thread asking for quixkremote on CM12.1 night lies.
Thank you so so much..............
Sent from my LG-ls990 using XDA Free mobile app
Hi
Also working on LG G2 D802 with CM12.1
Thanks!!!!
Here is version 4.50.19 for anyone who wants it. It has more options for devices to control but overall functionality and design layout of app is the same. If it doesn't install as user app place in system/app/LGQRemote with permissions rw-r--r--
LGQRemote.apk
xlxcrossing file is working fine on CM 13
thanks
ftomas said:
xlxcrossing file is working fine on CM 13
thanks
Click to expand...
Click to collapse
Really? I couldn't get it to work. I'm using Peel Remote from play store it works great.
You HAVE to set SELinux to permissive. It works just fine on CM13... And if you haven't flashed zip before, it can't work.
Sent from my LG-D855 using XDA Free mobile app
Sprint Note 5 (SM-N920P) Surround Sound MOD
This mod was created from the new MM update which I got from @tdunham's stock deodexed rom. Please don't ask if it will work on anything else as its specifically made for the Sprint Note 5. If you would like you can post your mixer_paths.xml and mixer_gains.xmlfiles, and as free time allows I will make the necessary changes for your variant or phone.
VIPER- From my personal experience the Loud version of this mod may give you some issues such as more noise, crackling, etc. if using with Viper or other sound boosting mods and apps... I would stick to the Stock, or Medium.
This mod will activate your handset speaker to be on at the same time as the main speaker creating a surround sound type effect while watching videos, you tube, playing music, etc...
PREREQUISITES
Rooted Sprint Galaxy Note 5
DISCLAIMER
I am not responsible in any way for anything that happens to your device whether manually installing the files or flashing zip files for the surround sound mod. You do so at your own risk. I have tested this on my phone and it works great. Enjoy.
INSTALLATION
You can install this two ways your choice.
1. Download and flash the included zip using your custom recovery. To go back to stock download and flash the revert to stock zip included.
2. Download the zip. Extract the two files in the zip (mixer_paths.xml and mixer_gains.xml). In System/Etc, rename those same files with a .bak so that you will have them if you want to revert back to stock. Place the two .xml files from the zip in the same System/Etc folder, fix permissions and reboot.
CREDITS
Dwitherell
Tdunham
Chainfire
Samsung
Contributors
SShafranko
Created
April 20, 2016
DOWNLOADS
-----Surround Sound-----
https://www.mediafire.com/download/j4fa5br4hgyo5wj
-----Medium Surround-----
https://www.mediafire.com/download/korxwzkr635iano
-----Loud Surround-----
https://www.mediafire.com/download/2m1499xrc3q77ii
-----Revert To Stock-----
https://www.mediafire.com/download/2c6xhh7217fknjq
Just in Case
Guys i dont have a Sprint N5 i have Tmo. Could someone please let me know if it downloads, flashes and works ok....PLEASE HAVE A BACK UP OF YOUR ROM JUST UN CASE...TY
Downloaded, on dedoxed stock mm. I hear sound from bottom and top of phone)
I used the loud file
djhulk2 said:
Downloaded, on dedoxed stock mm. I hear sound from bottom and top of phone)
I used the loud file
Click to expand...
Click to collapse
Great..thank you thats what i wanted to hear...any distirtion playing music with the loud file?
sshafranko said:
Great..thank you thats what i wanted to hear...any distirtion playing music with the loud file?
Click to expand...
Click to collapse
None that I can hear
I used medium surround. Works really well. Thanks for sharing
Did you guys install manually or via flashing?
Sent from my SM-N920P using XDA-Developers mobile app
SantinoInc said:
Did you guys install manually or via flashing?
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
You can flash it...no probs
I applied the loud zip and whenever i get a incoming call and my phone is off, it starts ringing and i can't turn on the screen and i have to force reboot so how can i fix this problem
Carlmoran13 said:
I applied the loud zip and whenever i get a incoming call and my phone is off, it starts ringing and i can't turn on the screen and i have to force reboot so how can i fix this problem
Click to expand...
Click to collapse
Flash the revert to stock zip and see if it still happens. I havent seen anyone else report that it could be kernel, rom related. Once you flash back to stock youll know..post the rom, kernel, mods your using also if flashing to stock fixes it
Thanks man gonna give it a try
Sent from my SM-N920P using XDA-Developers mobile app
Josephigloe said:
Thanks man gonna give it a try
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
Let me know how it works and which option u chose.
Sent from my SM-N920P using XDA-Developers mobile app
SantinoInc said:
Let me know how it works and which option u chose.
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
File corrupt it didn't work I chose stock surround, I'm on stock tar n920p pc3 I do have a theme applied that's it no mods besides root and twrp.
If I have helped, please hit the like button.
---------- Post added at 12:31 AM ---------- Previous post was at 12:26 AM ----------
Josephigloe said:
File corrupt it didn't work I chose stock surround, I'm on stock tar n920p pc3 I do have a theme applied that's it no mods besides root and twrp.
If I have helped, please hit the like button.
Click to expand...
Click to collapse
Give me a sec I just re-download with es download pro
If I have helped, please hit the like button.
---------- Post added at 12:46 AM ---------- Previous post was at 12:31 AM ----------
Josephigloe said:
File corrupt it didn't work I chose stock surround, I'm on stock tar n920p pc3 I do have a theme applied that's it no mods besides root and twrp.
If I have helped, please hit the like button.
---------- Post added at 12:31 AM ---------- Previous post was at 12:26 AM ----------
Give me a sec I just re-download with es download pro
If I have helped, please hit the like button.
Click to expand...
Click to collapse
Bad download on my end all is good.
Sent from my SM-N920P using XDA-Developers mobile app
Im still having the same problem when i revert to stock and i have the stock kernel and this is very frustrating when i have to do reboot when i get a incoming call
---------- Post added at 01:57 AM ---------- Previous post was at 01:57 AM ----------
sshafranko said:
Flash the revert to stock zip and see if it still happens. I havent seen anyone else report that it could be kernel, rom related. Once you flash back to stock youll know..post the rom, kernel, mods your using also if flashing to stock fixes it
Click to expand...
Click to collapse
Im still having the same problem when i revert to stock and i have the stock kernel and this is very frustrating when i have to do reboot when i get a incoming call
Carlmoran13 said:
Im still having the same problem when i revert to stock and i have the stock kernel and this is very frustrating when i have to do reboot when i get a incoming call
Click to expand...
Click to collapse
I'll try to help you the best i can but if you fkashed the revert to stock zip, it replaced any modded files you installed with my mod, with the stock files.
In my experience the only time I've seen the incall reboot bug on the N5 is when you flash a modded kernel whether it be a stock modded kernel for root or a kernel with tons of options.
Im not positive ill take a look in a min, but see if @UpInTheAir has a Skyhigh kernel for your variant. He is one of the best kernel devs for the N5 and i know he has the incall reboot bug squashed for the Tmo variant.
1. Are you on Marshmallow?
2. How did you root?
I am on marshmallow and i installed twrp through odin an installed supersu 2.71
---------- Post added at 02:18 AM ---------- Previous post was at 02:16 AM ----------
sshafranko said:
I'll try to help you the best i can but if you fkashed the revert to stock zip, it replaced any modded files you installed with my mod, with the stock files.
In my experience the only time I've seen the incall reboot bug on the N5 is when you flash a modded kernel whether it be a stock modded kernel for root or a kernel with tons of options.
Im not positive ill take a look in a min, but see if @UpInTheAir has a Skyhigh kernel for your variant. He is one of the best kernel devs for the N5 and i know he has the incall reboot bug squashed for the Tmo variant.
1. Are you on Marshmallow?
2. How did you root?
Click to expand...
Click to collapse
I am on marshmallow and i installed supersu 2.71 through twrp and i was using the skyhigh kernel, but i installed a deodexed marshmallow rom and kept the kernel stock
Carlmoran13 said:
I am on marshmallow and i installed twrp through odin an installed supersu 2.71
---------- Post added at 02:18 AM ---------- Previous post was at 02:16 AM ----------
I am on marshmallow and i installed supersu 2.71 through twrp and i was using the skyhigh kernel, but i installed a deodexed marshmallow rom and kept the kernel stock
Click to expand...
Click to collapse
Did you have the reboot prob with skyhigh? Im betting no...i would flash sky again and try
sshafranko said:
Did you have the reboot prob with skyhigh? Im betting no...i would flash sky again and try
Click to expand...
Click to collapse
Yeah i was having the problem with skyhigh kernel
Carlmoran13 said:
Yeah i was having the problem with skyhigh kernel
Click to expand...
Click to collapse
Honestly i donno what else to tell you...if someone else in here reports the same problem then i can see it being this mod...anyway ill take a look at the files make sure everything is as it should be...dirty flash your rom and that will replace all mods and leave you stock. If it still reboots, theres an issue elsewhere...are you using xposed?
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
can you extract Boxer email from the c-apps of COS13...
really need that app
nulogic said:
can you extract Boxer email from the c-apps of COS13...
really need that app
Click to expand...
Click to collapse
Sorry, this post is only for TrueCaller integrated. See you in this forum http://forum.xda-developers.com/android/development/c-apps-modded-cyanogen-os-c-apps-cm13-t3254865/post67207838#post67207838
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
TheQuarterMile said:
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
Click to expand...
Click to collapse
Yes, it´s working for me. But you make all of the steeps of the first post... :bueno:
Did the above and got it to work on my OnePlusOne running Temaesk ROM. Just one question... I can't seem to find the option for vibrate on answer and hangup... Is it there?
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
I managed to get this done by flashing only one zip.
I updated the c-apps thread because there are more people in there.
if you want, you can can update the steps, if everything working for you.
Thanks, worked perfectly
There was already a time searching for these mods!
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
Is there any way to install the dialer on rooted stock Marshmallow?
kushalchauhan98 said:
Is there any way to install the dialer on rooted stock Marshmallow?
Click to expand...
Click to collapse
I don't know. This is for CM13 and CM13 based roms.
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
kunalshah912 said:
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
Click to expand...
Click to collapse
Thanks for the info. I'll upload soon again.
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
After I've tried to enable true caller for the dealer I've got an error
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
arvindgr said:
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
Click to expand...
Click to collapse
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Click to expand...
Click to collapse
Yeah It just worked fine for me. Give that a try...
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
sanangel said:
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Ibuprophen said:
sanangel said:
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Can I ask you what has worked?
Click to expand...
Click to collapse
sanangel said:
Can I ask you what has worked?
Click to expand...
Click to collapse
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
These are the Steps i took:
1) I Installed the "Cyanogen Account" app. Then i log into it.
2) I then i Installed the "Truecaller" app. Then i did not open it, nor did anything else, till I completed Step 5.
3) I then booted into Recovery and flashed the "Dialer" zip file. I then cleared the Dalvik Cache and rebooted the device.
4) After the bootup has completed, right away, I then went into:
I first entered the System "Settings" menu
--> Apps/Applications
--> selected the gear on the top right that placed me in the "Configure Apps" screen
--> i then selected "Default App"
--> i then selected "Phone App"
--> i then selected the blue "Phone" (which is probably the only one there to choose from)
--> then i then exited the System "Settings" menu.
5) Now you open the "Dialer" and then a "Truecaller" popup will appear. Select the "Yes" option. Then another popup will appear with an option to select the "Cyanogen" account. You will then select your email address (FYI... your email address is the username of your "Cyanogen" account). Once your email is selected, you will then proceed. Now just sit back and do nothing (as it will have your devices phone number already and will confirm it on it's own). Once you see the confirmation, you will then select the option to proceed.
CONGRATULATIONS!
You are now all set with Truecaller.
I hope my instructions are understandable.
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
Good Luck!!!
Sent from my Samsung SCH-I535 using XDA Labs
V4A on Nougat/Oreo
Before starting:
-Make sure you have TWRP!
-Viper4android doesn't seem to work on certain roms, but there should be no problem with the more popular ones and it also works on all AOSP roms.
-Always have a nandroid backup, in case something goes wrong or you just want to uninstall viper4android!
How to install?
1. Download audio_effects.conf file and with a root explorer replace the one in /system/etc
2. Uninstall or Freeze "Sound Alive" (for AOSP "MusicFX") with Titanium Backup.
3. If you have magisk, flash Viper4Android Magisk in recovery. For supersu use regular Viper4Android zip.
(When it asks to install the driver, then just wait.
If seems to be frozen just don't touch it and let it do it's job.)
Enjoy!
thanks. works as it sounds
- tapatalked - from my VANTABLACK S7 EDGE
You're welcome
Hi Guys,
I've tried everything and can't get the driver to load under N.
Driver shows up as "abnormal" after a reboot.
I'm using on the edge 5 rom, I was on 3/4 before and was having the same issues.
Any pointers would be awesome.
nate911 said:
Hi Guys,
I've tried everything and can't get the driver to load under N.
Driver shows up as "abnormal" after a reboot.
I'm using on the edge 5 rom, I was on 3/4 before and was having the same issues.
Any pointers would be awesome.
Click to expand...
Click to collapse
Had the same issue then I just flashed these two zips with twrp and all works fine.
http://forum.xda-developers.com/showthread.php?p=69618189
Sent from my SM-G935F using Tapatalk
seth2006 - Thank you!!! All working now, I've been pulling my hair out for the last 2 days
*Updated the guide*
Great tutorial thank you
TheSproker said:
*Updated the guide*
Click to expand...
Click to collapse
Is there any way to get arise sound system work in nougat??
Aakash Kaushal said:
Is there any way to get arise sound system work in nougat??
Click to expand...
Click to collapse
I personally haven't used arise on my s7, but I believe the procedure should be the same ( edit audioeffects.conf, freeze sound alive etc.)
TheSproker said:
I personally haven't used arise on my s7, but I believe the procedure should be the same ( edit audioeffects.conf, freeze sound alive etc.)
Click to expand...
Click to collapse
Holy s**t it works..thank you bro
Aakash Kaushal said:
Holy s**t it works..thank you bro
Click to expand...
Click to collapse
No problem
Been looking for this since yesterday. Thanks works as expected.
Sent from my SM-G935F using XDA-Developers mobile app
Works perfectly - Thank you,
Whats the install procedure on marshmallow ?
jassu said:
Whats the install procedure on marshmallow ?
Click to expand...
Click to collapse
If you don't have Sound Alive on your rom then just flashing the Viper4android zip should do the trick.
But if you have the annoying Sound Alive, then the procedure is exactly the same, but then flash this zip.
Works very Good on the second nougat beta !!! Thanks!
Thank you, works like a charm. Loving it !!
S7 Edge Nougat Beta
Does this mod/guide also work on mm roms ?
Kyuuri27 said:
Does this mod/guide also work on mm roms ?
Click to expand...
Click to collapse
Yes, but instead install this apk.