Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
can you extract Boxer email from the c-apps of COS13...
really need that app
nulogic said:
can you extract Boxer email from the c-apps of COS13...
really need that app
Click to expand...
Click to collapse
Sorry, this post is only for TrueCaller integrated. See you in this forum http://forum.xda-developers.com/android/development/c-apps-modded-cyanogen-os-c-apps-cm13-t3254865/post67207838#post67207838
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
TheQuarterMile said:
Does this work on any CyanogenMod based roms? Last time I was getting an fc.
Click to expand...
Click to collapse
Yes, it´s working for me. But you make all of the steeps of the first post... :bueno:
Did the above and got it to work on my OnePlusOne running Temaesk ROM. Just one question... I can't seem to find the option for vibrate on answer and hangup... Is it there?
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
I managed to get this done by flashing only one zip.
I updated the c-apps thread because there are more people in there.
if you want, you can can update the steps, if everything working for you.
Thanks, worked perfectly
There was already a time searching for these mods!
sanangel said:
Hello friends. As in another threads is not fully explained , I decided to make a tutorial on the steps to installing accurate of the integrated truecaler (extracted of the c-apps of COS13) in roms CM13 and CM13 based.
There are also the files and apks necessary in this thread.
- Thanks to @duminduweera for the flasheable file of this post http://forum.xda-developers.com/showpost.php?p=66303581&postcount=243. Without their contribution, this would not be possible.
The steps:
1. - Install Cyanogen Account http://www.apkmirror.com/apk/cyanogenmod/cyanogen-account/cyanogen-account-1-3-8-release/cyanogen-account-1-3-8-1-3-8_r1-r1-cyanogen-c-apps-android-apk-download/ and log in.
2. Install Truecaller.apk (of the COS13) https://www.dropbox.com/s/qoegr1352ebwaje/Truecaller.apk?dl=0 and don't open.
3. Flash zip of the dialer of https://drive.google.com/file/d/0B76gXTK-ABvxTERLTGpqVGZ1MjA/view
4. Reboot and go to settings/applications and and grants permits to the new phone apk. And go to applications and roulette adjustments, default applications , select the new phone.
With these steps , it works perfectly well...
Click to expand...
Click to collapse
Is there any way to install the dialer on rooted stock Marshmallow?
kushalchauhan98 said:
Is there any way to install the dialer on rooted stock Marshmallow?
Click to expand...
Click to collapse
I don't know. This is for CM13 and CM13 based roms.
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
kunalshah912 said:
The Dropbox link second step isn't working anymore , and I installed cyanogen apk and signed in and flashed zip . gave permissions to phone app and also made default , still it crashed to open.
Click to expand...
Click to collapse
Thanks for the info. I'll upload soon again.
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
After I've tried to enable true caller for the dealer I've got an error
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
arvindgr said:
For Truecaller Service app whose dropbox link doesn't work use 1.23 version from here http://www.apkmirror.com/apk/true-s...truecaller-service-1-23-android-apk-download/
Dialer works fine in both my Latest offical RR ROM on both Yureka and Oneplus 3...
Click to expand...
Click to collapse
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
That link is for the Truecaller v1.23 (13). It states the following:
"Min: Android 5.0 (Lollipop, API 21)"
"Target: Android 5.1 (Lollipop MR1, API 22)"
The thread title states Truecaller for CM13 which is Android 6 Marshmallow.
Are you sure that version works with CM13?
I just wanted to get some clarification.
Thanks!
Click to expand...
Click to collapse
Yeah It just worked fine for me. Give that a try...
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
sanangel said:
Ibuprophen said:
@sanangel, though the title states CM13 Marshmallow, have you or, to your knowledge, anyone else ever tried this with CM14.0/14.1 Nougat?
Just curious...
I'm not sure even if the Truecaller feature is part of CM14.0/14.1 Nougat.
---------- Post added at 10:56 PM ---------- Previous post was at 10:52 PM ----------
I have not tried, sorry.
This is taken from CyanogeOS 13, with the closure of Cyanogen Inc we will not have CyanogeOS 14.1.
If Cyanogen make C-Apps for CM14.1 we will have truecaller with integrated marker .
I am not a developer...
Click to expand...
Click to collapse
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Ibuprophen said:
sanangel said:
Well tickle me with a feather and call me late for dinner!!!
It worked!!!
:laugh:
Sent from my Samsung SCH-I535 using XDA Labs
Click to expand...
Click to collapse
Can I ask you what has worked?
Click to expand...
Click to collapse
sanangel said:
Can I ask you what has worked?
Click to expand...
Click to collapse
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
These are the Steps i took:
1) I Installed the "Cyanogen Account" app. Then i log into it.
2) I then i Installed the "Truecaller" app. Then i did not open it, nor did anything else, till I completed Step 5.
3) I then booted into Recovery and flashed the "Dialer" zip file. I then cleared the Dalvik Cache and rebooted the device.
4) After the bootup has completed, right away, I then went into:
I first entered the System "Settings" menu
--> Apps/Applications
--> selected the gear on the top right that placed me in the "Configure Apps" screen
--> i then selected "Default App"
--> i then selected "Phone App"
--> i then selected the blue "Phone" (which is probably the only one there to choose from)
--> then i then exited the System "Settings" menu.
5) Now you open the "Dialer" and then a "Truecaller" popup will appear. Select the "Yes" option. Then another popup will appear with an option to select the "Cyanogen" account. You will then select your email address (FYI... your email address is the username of your "Cyanogen" account). Once your email is selected, you will then proceed. Now just sit back and do nothing (as it will have your devices phone number already and will confirm it on it's own). Once you see the confirmation, you will then select the option to proceed.
CONGRATULATIONS!
You are now all set with Truecaller.
I hope my instructions are understandable.
*** NOTE: Please keep in mind that this was only confirmed working on the CM13 in my Verizon Samsung Galaxy S3 (SCH-I535/D2VZW). It should work with most (but, probably not all) devices running the CM13 ROM. ***
Good Luck!!!
Sent from my Samsung SCH-I535 using XDA Labs
Related
How to get Viper4Android working on Lollipop ROMs
I want to start the thread off by stating that I DID NOT develop this mod myself. Full credit for the work goes to @FuMMoD for the updates for V4A’s .apk and libraries. Also to @//.dax for the new icon. @AndrasLOHF for the thread that lists the original .zip files we’ll be flashing, also the Viper4Android team for making this app in the first place. This thread is simply a detailed, in-depth guide with a video to help people install what they created. Links to the original threads are below. Please visit it for more information and help. This wouldn’t have been possible without these people.
I’ve personally tested this method on many ROMs based off of CM12 on my Samsung Galaxy S4 GT-i9500 and it’s worked every time. If it doesn’t work for your ROM, post details and I’ll look into it. Most people have tried this method on their Nexus 5 and reported success.
Stock users!! If you use a ROM based on TouchWiz or other ROMs with a stock kernel that is set to "Enforcing", there is a chance step #3 will fail! Please read Q6 in the F.A.Q. below for help on this! This is NOT a V4A problem! And it CAN be fixed usually! Read carefully!
Please do not post that this isn't working for you unless you are 100% sure you did the steps exactly like I mentioned. Read the F.A.Q. first to make sure. Visit the thread links below for more help. It should theoretically work on all Lollipop ROMs.
Please follow this carefully step by step or this may not work for you. If you ARE sure you did these steps correctly and it still didn't work (I don't see why it wouldn't), post your device information and ROM details and I'll look into it.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.]
Let's get started.
Things you'll need:
1. A lollipop ROM. (duh)
2. Root access.
3. Custom recovery. (Any recovery should work as long as it can flash .zip files)
I would recommend reading the F.A.Q. before you do this!
Here's a video tutorial I made to make things easier to understand:
Here are the steps:
Head into your settings, and go to about device. Look for the SELinux status. If it says either “Permissive” or “disabled”, move on to step 4. If it says “Enforcing”, go to step 2.
Download and install “SELinux Mode Changer” from the Play Store (link in post two)
Open the app you just installed, and tap on “Permissive”. Grant root access when and if prompted, then reboot the device. <--If this does not work, read question 6 of the F.A.Q. below.
Go to post two, and download “Viper4Lollipop.zip” from any of the mirrors listed. (Request for more mirrors).
Go into app drawer, and disable “Audio FX”, or “DSP Manager” or “Music FX” depending on your ROM.
Disable stock music player. <--Read question 1 of the F.A.Q. below to see why you have to do this.
Go to developer options, and uncheck “Use NuPlayer”.
Reboot device into recovery.
Flash the “Viper4Lollipop.zip” you downloaded. Wipe dalvik/cache. Reboot.
Open the V4A app from the app drawer, and install drivers when prompted after granting root access. Reboot once it’s done.
Go to play store and download any third party music app. (Shuttle Player or Google Play Music are good options.)
Enjoy the sweet sound of V4A on your Lollipop ROM.
F.A.Q.
Q1: Why do I need to disable the stock music app?
A: V4A causes force closes when using the stock music app. You CAN try another .zip (see post two and question 2 of F.A.Q.) which fixes this issue, but the disadvantage of that is that you might lose Chromecast functionality. Moreover, I never tried this personally so I can’t help you if you flash the other one and it doesn’t work. For anyone who wants to try a more complex approach and keep stock music player compatibility, see post #20 by @mholloway.
Q2: What is the difference between the recommended .zip and alternate .zip?
A: The recommended one will break stock music app, but it’ll work fine otherwise. The alternate one MIGHT fix the stock music app, but you might lose Chromecast functionality. Refer to the original thread for more details on this.
Q3: Will this cause any bricks or bootloops?
A: Absolutely no. It shouldn't. Never bricked mine.
Q4: How do I remove this?
A: Uninstall V4A drivers, then delete the app from the root directory.
Q5: Why does the volume go down on some screens?
A: This isn’t a problem with V4A. This is because of Google Now conflict or any other app that uses the microphone. It happens on some ROMs and they are the problems. Example: Volume went down for me on GearCM but not on Euphoria OS. Fix? Disable "OK Google" hot-word detection or disable/stop apps that use the microphone.
Q6: The kernel won't change to permissive.
You're not alone. Some people reported this doesn't work on some stock ROMs. This is because of the stock kernel on some stock ROMs (mostly Samsung) that cannot be changed to permissive. At this point, your best bet is to try a different kernel for your phone and ROM. A simple Google search will help you with that. Thanks to @banccalif in post #15 for the suggestion.
Watch the video if the steps seem complicated to you. If you're gonna tell other people about this, please link back to this thread.
Enjoy V4A for Lollipop and be sure to check out the thread in post two and thank the devs. They’re the geniuses who did this. :good:
Links
Download and other links:
SELinux Mode Changer:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux&hl=en
Viper4Lollipop: Updated links! (25/09/2016)
https://goo.gl/d923u2 <-- MEGA.CO.NZ mirror
http://www.mediafire.com/file/46dd7ddcpqc8s8d/Viper4Lollipop_v2.3.3.0.zip <-- MediaFire mirror
Main thread link:
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Official Viper4Android thread:
http://forum.xda-developers.com/showthread.php?t=2191223
Does this work on alemtro Aurora lollipop rom for i9500?
Bugz1 said:
Does this work on alemtro Aurora lollipop rom for i9500?
Click to expand...
Click to collapse
On that particular ROM? No. I have not. But it worked on 100% of Lollipop ROMs I've tried.. CM12, GearCM, Resurrection Remix and Euphoria. Worked just fine. If you do decide to try it, do post results.
I am not able to disable or change selinux to permissive on this rom
Bugz1 said:
I am not able to disable or change selinux to permissive on this rom
Click to expand...
Click to collapse
Even with that app? I don't think you can disable it if it's set to enforcing, only to permissive.. But I don't know why you're not able to set it to permissive from enforcing though.. :/ Try asking in the ROM forum? Mine was disabled from the beginning so I had no troubles with this. But everyone who has had it to enforcing WAS able to change it with that app. :/
I guess it would not change on touchwiz based roms
Bugz1 said:
I guess it would not change on touchwiz based roms
Click to expand...
Click to collapse
Never tried this on a TouchWiz based ROM, but the app should still theoretically work. :/ Have you disabled Knox if you have it?
TheXGX said:
Never tried this on a TouchWiz based ROM, but the app should still theoretically work. :/ Have you disabled Knox if you have it?
Click to expand...
Click to collapse
I always disable knox even if its not required
Bugz1 said:
I always disable knox even if its not required
Click to expand...
Click to collapse
Kudos to that. xD But anyway.. Then idk why it won't work man.. :/ I just flashed Euphoria OS today and it's working just fine. Like it was on my Resurrection Remix ROM before this.
Cool. I'm thinking of using a cm based rom simply because i want to use v4a but the only thing i don't like about cm based roms is that the contacts on my sim don't show up in the contacts app
Bugz1 said:
Cool. I'm thinking of using a cm based rom simply because i want to use v4a but the only thing i don't like about cm based roms is that the contacts on my sim don't show up in the contacts app
Click to expand...
Click to collapse
Really? I didn't even know it has that problem lol All my contacts are synced with Google since I flash ROMs all the time and don't have patience to backup phone contacts every time I do.. And my SIM could never accommodate my 300+ contacts. But if it helps, @BlaqueDroid's Euphoria OS I'm using now is pretty nice if you wanna try it out. :good:
Hey man, I'd like to ask ya, I've installed 2.3.4.0 , on stock player the processing is working BUT when I'm using TTpod then writes NO, on 2.3.3.0 was working.so if i flash the V4A patch compatibility zip might work?
Στάλθηκε από το LG-D802 μου χρησιμοποιώντας Tapatalk
TheXGX said:
Really? I didn't even know it has that problem lol All my contacts are synced with Google since I flash ROMs all the time and don't have patience to backup phone contacts every time I do.. And my SIM could never accommodate my 300+ contacts. But if it helps, @BlaqueDroid's Euphoria OS I'm using now is pretty nice if you wanna try it out. :good:
Click to expand...
Click to collapse
Cool beans bro. Will test that rom as soon as i get a chance
TheXGX said:
Never tried this on a TouchWiz based ROM, but the app should still theoretically work. :/ Have you disabled Knox if you have it?
Click to expand...
Click to collapse
It's about the kernel.. If it's a stock kernel, it will not change to permissive. I'm on a stock based tw rom with a custom kernel and I'm fully functional on v4a
vrwmiaris1 said:
Hey man, I'd like to ask ya, I've installed 2.3.4.0 , on stock player the processing is working BUT when I'm using TTpod then writes NO, on 2.3.3.0 was working.so if i flash the V4A patch compatibility zip might work?
Στάλθηκε από το LG-D802 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
I dunno what patch compatibility zip you are talking about. The zip in this thread contains the full app along with modified and additional binaries. FYI, the app included is 2.3.3.0 and not 2.3.4.0. I haven't gotten around to update it yet, but if it helps, I just installed TTPod on my Galaxy S4 i9500 running CM12 to test it and it's working perfectly like you said.
banccalif said:
It's about the kernel.. If it's a stock kernel, it will not change to permissive. I'm on a stock based tw rom with a custom kernel and I'm fully functional on v4a
Click to expand...
Click to collapse
Updated OP. Thanks.
banccalif said:
It's about the kernel.. If it's a stock kernel, it will not change to permissive. I'm on a stock based tw rom with a custom kernel and I'm fully functional on v4a
Click to expand...
Click to collapse
@banccalif can you send me a link to the custom kernel that you are using? I never dealt with kernels before. Is it the regular flashing process with custom recovery?
---------- Post added at 09:06 AM ---------- Previous post was at 08:38 AM ----------
Also are you using tw based lollipop rom for i9500?
Bugz1 said:
@banccalif can you send me a link to the custom kernel that you are using? I never dealt with kernels before. Is it the regular flashing process with custom recovery?
---------- Post added at 09:06 AM ---------- Previous post was at 08:38 AM ----------
Also are you using tw based lollipop rom for i9500?
Click to expand...
Click to collapse
I'm on a sprint s5 running MOAR 6.0 Lollipop so I don't know if there are or where the kernel may be for you. Kernels are the same as flashing a rom, wipe both caches before and after flashing
---------- Post added at 10:54 AM ---------- Previous post was at 10:53 AM ----------
TheXGX said:
Updated OP. Thanks.
Click to expand...
Click to collapse
No problem at all ?
I am on MOAR Ao6 lollipop. I have the stock music player.which viper won't work with,so I extracted the AOSP music player from the MOAR ROM and changed the apk name from SamsungMusic_20 to SamsungMusic1_20 and created a folder named the same in system/app.set permissions and now I have the stock player. And the AOSP player (Apollo) and viper4android works with Apollo.
Credits @sefnap @RieGo, and @zzeneg.
Want Stock LG QuickRemote App back on your phone? Using Cyanogenmod 12 Nighly Build? This ones for you!
Tested on AT&T White LG G3 on Mar04 nightly build of Cyanogenmod 12
Steps:
1. Download file attached below. If one doesn't work, try the other.
2. Reboot to TWRP or Custom Recovery
3. Wipe Dalvik cache and Cache
4. Flash Zip file
5. Reboot
6. Enjoy.
Note that Files for the remote may take a while to load... Be Patient!
If issue arises run this app and reboot Here
Warning. I am not responsible for any problems that may arise. Note that you should always have a backup for anything you flash!
Wil this work on LG g3 d855? Or is it only for AT&T?
I flashed but there is no manufacturer to select
drtung said:
I flashed but there is no manufacturer to select
Click to expand...
Click to collapse
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Does it work on BlissPop?
Sent from my LG-D855
Hgneto said:
Does it work on BlissPop?
Sent from my LG-D855
Click to expand...
Click to collapse
Yup. Version 1 works fine :good:
Updated App?
Is this the updated lollipop version, so i can also control ACs and projectors?
Version 1 is working fine on latest blisspop 3.2
---------- Post added at 06:14 AM ---------- Previous post was at 06:08 AM ----------
mg5000 said:
Is this the updated lollipop version, so i can also control ACs and projectors?
Click to expand...
Click to collapse
There's no ACs and projectors in this version.
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
TheHappyBuddhist said:
Both versions are confirmed working on BlissPop 3.3... But I'm from India and I use Asianet set up box in my home... But its not available in both versions.. Its there in LG Stock ROMS.. I tried with other remotes,, but can't make it to work.. Can you please add the Asianet remote to the set up boxes list? Or any idea on how to?
Click to expand...
Click to collapse
You can create your own remote by selecting "+" then "universal remote"
---------- Post added at 09:34 PM ---------- Previous post was at 09:29 PM ----------
Eeuwe said:
Please change your SELinux to 'permissive' and try again. You can use the app SELinux Mode Changer for that.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
SE Linux Mode Changer seems to have been removed from Playstore... at least in Belgium...
veronesi.n said:
You can create your own remote by selecting "+" then "universal remote"
Click to expand...
Click to collapse
Tried and working Only thing is that the icons are not as big as stock ones, maybe because of my custom DPI (but the stock remotes are bigger somehow) Anyways, thanks!!
Please HELP
Which is the latest one version 1 or 2? and where is the ac remotes?
Do you have any newer version of that QuickRemote?? I mean operate the projector etc.
Thanks for the app mod, works fine.
You my friend got it and there thousands trying to get this to work on lg g3 aosp ROMs I have been at it an hour and was bout to give up and I found your thread DL the apk after enabling init d and selinux and works perfect everyone needs to know and remove all other thread asking for quixkremote on CM12.1 night lies.
Thank you so so much..............
Sent from my LG-ls990 using XDA Free mobile app
Hi
Also working on LG G2 D802 with CM12.1
Thanks!!!!
Here is version 4.50.19 for anyone who wants it. It has more options for devices to control but overall functionality and design layout of app is the same. If it doesn't install as user app place in system/app/LGQRemote with permissions rw-r--r--
LGQRemote.apk
xlxcrossing file is working fine on CM 13
thanks
ftomas said:
xlxcrossing file is working fine on CM 13
thanks
Click to expand...
Click to collapse
Really? I couldn't get it to work. I'm using Peel Remote from play store it works great.
You HAVE to set SELinux to permissive. It works just fine on CM13... And if you haven't flashed zip before, it can't work.
Sent from my LG-D855 using XDA Free mobile app
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
KK, LP or MM?
Yes Viper4Android is working on MM. Already using it for almost 24 hours. No problem at all.
Tomogitarist said:
Does it work on stock Marshmallow?
If I remember correctly, original latest version of Viper4Android only supports Lollipop.
Click to expand...
Click to collapse
sachs said:
KK, LP or MM?
Click to expand...
Click to collapse
It works on both Lollipop and Marshmallow. I've tested it on D855 30B stock ROM and also Lollipop 21A stock ROM. Should work with any ROM, even AOSP and CM.
Great help! Does it still needs to set selinux to permisive ?
gado45 said:
Great help! Does it still needs to set selinux to permisive ?
Click to expand...
Click to collapse
No it doesn't. The new version works with kernel set to enforcing as well.
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
darisito said:
I did as instructed, but the app is just not there. Do I have to uninstall the older one or flash it on top?
Click to expand...
Click to collapse
I don't know why you can't find the app. Try deleting the previous one using Titanium if it is installed into system or just uninstall it normally. then try re flashing this zip.
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I guess you have to place the IR sample files into the specific folder right?
Here this will help:
IRS Instructions
Gugus38 said:
I upgraded to mm but I can't see the impulse responses, app says it's empty whereas it's there! Anybody can help me? Thx
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Got to choose "expert" mode from the menu before it works
i tried but not working on cm13
Vivasanti said:
Got to choose "expert" mode from the menu before it works
Click to expand...
Click to collapse
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Gugus38 said:
I know I can see the menu, but I can't see the irs profiles it always says it's empty. Even if I copy it the the legacy/Viper4android/kernel folder it doesn't find them...
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
IAM_TheFlash said:
Hi guys, Viper4Android has been updated to v2.4.0.1 and I edited this zip file by adding the new apk and making it easier to install Viper4Android directly to the system.
All Original credits to this thread and The Viper Team.
I have only added in the new apk v. 2.4.0.1.
Instructions:
1. Boot into recovery.
2. Flash the attached zip.
3. Reboot to System.
4. Open Viper4Android, Grant Root access and Install the driver when asked.
(Make sure you have latest BusyBox installed)
5. Reboot once again. ENJOY
I have tested the zip on LG G3 D855. It works flawlessly. Should work with any device and any ROM.
DOWNLOAD
Click to expand...
Click to collapse
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Vivasanti said:
Are you on marshmallow? It's data/media/legacy/viper4android.
Put all my profiles and IRS in the profile/kernel folder in their and they show up
---------- Post added at 09:44 AM ---------- Previous post was at 09:43 AM ----------
Doesn't work on Marshmallow Fulmic 3.5, I've flashed it and its still version 2.3.4.0
Click to expand...
Click to collapse
Thanks! It works for irs but not for DDC folder is empty whereas there profiles in the app..
Regarding the zip, I deleted the whole app and all its folders and it worked, the app then installed to latest version.
Sent from my LG-D855 using Tapatalk
Somehow it doesn't show any effect on LL Stock Rom.
Tried Fx compatible mode, still doesn't work with Stock Music App.
Edit: Works now, forgot to change SELinuxMode
IAM_TheFlash said:
No it doesn't. The new version works with kernel set to enforcing as well.
Click to expand...
Click to collapse
It did not worked without setting the selinux to permissive. Status abnormal said
gado45 said:
It did not worked without setting the selinux to permissive. Status abnormal said
Click to expand...
Click to collapse
On LP you still need a permissive kernel. I'm not sure about MM, although my kernel is indeed set to permissive. I'm on Xceed so that is set to permissive.
Can someone say, what s the best configuration ? I can t find it anywhere.
Vaibhav:
New version of Google pixel Phone 8.0.147081443 out and working with any rooted nought rom odex or deodex .
Before install please flash Google dialer permission in twrp.then install dialer apk .
Change log bug fixed
http://www.apkmirror.com/apk/google...gle-phone-8-0-147081443-android-apk-download/
New dark blue colour version big photo. Isntall as normal apk. Work on rooted & non rooted phone
V8 in GREEN COLOUR .
http://www.apkmirror.com/apk/google...gle-phone-9-0-153787429-android-apk-download/
saxena1 said:
Vaibhav:
New version of Google pixel Phone 8.0.147081443 out and working with any rooted nought rom odex or deodex .
Before install please flash Google dialer permission in twrp.then install dialer apk .
Change log bug fixed
http://www.apkmirror.com/apk/google...gle-phone-8-0-147081443-android-apk-download/
Click to expand...
Click to collapse
Could you please add support for marshmallow
saxena1 said:
Vaibhav:
New version of Google pixel Phone 8.0.147081443 out and working with any rooted nought rom odex or deodex .
Before install please flash Google dialer permission in twrp.then install dialer apk .
Change log bug fixed
http://www.apkmirror.com/apk/google...gle-phone-8-0-147081443-android-apk-download/
Click to expand...
Click to collapse
Why does root be needed, when all that we do is flashing in twrp and normal installation ?
Am I missing something
dollardollar said:
Why does root be needed, when all that we do is flashing in deep and normal installation ?
Am I missing something
Click to expand...
Click to collapse
Because without root you can't flash Google dialer permission. this permission allows to install apk.
toole said:
Could you please add support for marshmallow
Click to expand...
Click to collapse
This akp is for marshmallow
saxena1 said:
This akp is for marshmallow
Click to expand...
Click to collapse
But its not v 8. I already have V 5 running on my marshmallow.
jayantraj said:
But its not v 8. I already have V 5 running on my marshmallow.
Click to expand...
Click to collapse
V8 is for nougat 7.
saxena1 said:
V8 is for nougat 7.
Click to expand...
Click to collapse
No. Its for marshmallow too.. check apkmirror
Apk not compatible
Where can I find Google Phone version 8.0.147081443? I cannot install this application on apk mirror. Is there any way to modify apk, and install on all non-nexus devices?
Tayler1917 said:
Where can I find Google Phone version 8.0.147081443? I cannot install this application on apk mirror. Is there any way to modify apk, and install on all non-nexus devices?
Click to expand...
Click to collapse
Read 0p
This was the only install on xda that worked on my SM-G930F (latest v7 stock firmware). Thank you!
Awesome!!!!:good::good:
Thanks
Google Phone 8.0.148481159 New Version When You Going To Patch
jack_ssl said:
Google Phone 8.0.148481159 New Version When You Going To Patch
Click to expand...
Click to collapse
No need to patch you can install directly original apk(if you already flashed permission zip)
Added New dark blue colour version big photo in op.
But this one dont appear any miss call from the system right?
I used your apk and it is the 5.0 version not the 8.0 version....can we use the 8.0 version and still have the big caller ID. if so how can we do this.
---------- Post added at 03:52 AM ---------- Previous post was at 03:36 AM ----------
saxena1 said:
No need to patch you can install directly original apk(if you already flashed permission zip)
Click to expand...
Click to collapse
will we still have the big picture for caller ID
comptonhubbard said:
I used your apk and it is the 5.0 version not the 8.0 version....can we use the 8.0 version and still have the big caller ID. if so how can we do this.
---------- Post added at 03:52 AM ---------- Previous post was at 03:36 AM ----------
will we still have the big picture for caller ID
Click to expand...
Click to collapse
V8 green colour added op.
thx a lot bro works fine in AOSP 7.1.1 rom
Thanks a ton bro.. the default dialer was too slow.. was looking for this since quite long..
this is the only one working on non-rooted phone S7 edge android 7
Code:
* Your warranty is now void(almost)---------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms --------------- STOP HERE!!
* The roms comes as it is----no workarounds --------- no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
* I will not help you if you have issues and you didnt follow the guide
* Introduction *
I made this ROM, in order to have the best Pixel Experience without any additional/useless features. It is based on the latest Lineage OS and it was built by me. It is working perfectly on my 3T and it should work with the 3 too (unified build)
*Features*
Based on the latest Lineage OS (built by me)
February Security patch
All Google Apps (replaced the stock ones)
Pixel Launcher with round icon support
Pixel Boot Animation
Pixel Sounds
Pixel Live Wallpapers
Pixel's blue accent
Google Assistant
Root is included (you have to enable it from the dev options)
Round Icon for Settings
OnePlus' Recorder app
*Bugs*
Camera is buggy (expected)
*Installation Guide*
PLEASE FOLLOW IT
1. Download the ROM
1b. Download the add-on package (required)
1c. Download the GApps OpenGapps creates many problems)
2. Boot to TWRP
3. Wipe system, data, cache
4. Flash the ROM
5. Boot to the system and finish the setup wizard
6. Boot to TWRP
7. Flash the GApps
8. Flash the add-on
9. Boot to system
9b. In order to have your Phone App fully working, you must set the Google DIaler / Phone as default on the Settings (See here)
10. VOILA
*Download*
Take a look at the 2nd post
*Donations*
Donations are always welcome. But I think it is more than enough just to press the "Thanks" button
XDA:DevDB Information
Pixel Experience, ROM for the OnePlus 3
Contributors
t-shock
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader and TWRP installed
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-02-28
Created 2017-02-27
Last Updated 2017-02-28
Download Section
*Download section*
Links for:
ROM: Here
Add-ON: Here (you MUST flash this only on my LAOS and not on the official one)
Gapps: Here
*Changelog*
Version 1.1:
1. Another layout of the rom. Easier to fix any issue and easier to update.
F.A.Q
Frequently Asked Questions (F.A.Q)
You may have some questions about this whole project and this is completely normal. So let’s begin
Q: Google Play Services force closes a lot
A: No reason to panic. Just follow my guide and everything will work just fine.
1. Connect with your WiFi
2. Go to Settings → Apps and find the Google Play Services.
3. Wipe Data and Cache
4. Go to Permission of the app, and enable everything
5. Add your Google Account
6. Voila
Q: The SimToolKit is missing. I need it
A: Flash this zip and it will be restored. I removed it because it wasnt round (uploading)
Q: Can I flash any other Gapps package?
A: NO. The other packages replaces apps that are vital for the phone and it may lead to a bad experience overall
Q: Why did you made this rom?
A: I wanted to have a great Pixel Experience (thus its name)
Q: Any screenshot?
A: Take a look at the Screenshot category
*Thanks to*
Lineage OS Team for managing to create this rom for our 3/3T
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
kscjx said:
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
Click to expand...
Click to collapse
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
t-shock said:
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
Click to expand...
Click to collapse
OK. Thanks. Will report on my experiences
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Kookitza said:
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Click to expand...
Click to collapse
Glad to see older users !! Do you own a 3/3T now?
t-shock said:
Glad to see older users !! Do you own a 3/3T now?
Click to expand...
Click to collapse
Yep, sold my s7 and bought op3t
Kookitza said:
Yep, sold my s7 and bought op3t
Click to expand...
Click to collapse
I did exaclty the same
I love my 3T although I miss the IP68
Woow congatulations for the rom man 5 stars from me
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Here we go
cannot get the in call ui? any fix?
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Kookitza said:
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Click to expand...
Click to collapse
Me too, when the setup pass through the "Just a sec.." screen it stops working.
How to workaround??
Solved, I've just remove the setup wizard from /system/priv-app by using twrp's file manager.
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Yes. Go to Default apps and set Google dialer as the default one.
pankajramnani said:
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Click to expand...
Click to collapse
For me it works just fine. Try flashing root again, whether it's lineage root or supersu
manikandanguru said:
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
Click to expand...
Click to collapse
It is based on purely stock Lineage OS, not with extra commits.
OpenGapps will delete some apps and thus the ROM will have many issues eg no launcher or some apps may miss.
Try flashing the ROM and the Gapps (that I gave) without booting and of course wipe everything again
-BE AWARE-
Flash the given Gapps without booting the system. Let me be more specific. Do not boot the ROM before flashing the given Gapps, otherwise you will have many issues.
Also OpenGapps will delete Pixel Launcher and thus you won't be able to use the ROM
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Go to settings - apps - click on gear icon - click on 'Phone app' and select Phone.
This helped in my case.