I've bought a 3 used Photon Q over the past month. The keyboard on one phone slides very freely. But the other 2 phones the keyboard is hard to slide out. You can feel the top half of the phone scraping against something (sounds like the keys) when the keyboard slides out. You can see wear marks on either side of the keyboard from repeated slides, probably from the scraping.
Is this normal wear and tear over time or a defect caused by misuse? Is there any way to fix this?
Related
If you slide out the keyboard, and turn the device over, on the screen side above the htc logo there is a flap thing that you can slide down. What is this? It makes a bit of a noise when you open the keyboard, quite annoying.
steveoidm said:
If you slide out the keyboard, and turn the device over, on the screen side above the htc logo there is a flap thing that you can slide down. What is this? It makes a bit of a noise when you open the keyboard, quite annoying.
Click to expand...
Click to collapse
I think it's there to protect the ribbon cable that joins the screen to the base.
It must be something to do with the keyboard linking to the rest of the phone when the keyboard is in use. YOu'll notice that when the keyboard is slid shut the slider opens. It doesn't really bother me from a noise perspective.
Just makes the opening / closing mechanism feel a bit rubbish. When actually it isn't, its just you fell that thin bit of plastic moving around. Shame.
I noticed that too. As others have said I think it is a slide mechanism to protect the ribbon cable linking the two halves.
Oh well. I dont care. No other phone can do all this stuff!
I've noticed that the slider functionality of my phone, possibly due to user-abuse, is starting to slide off the rails*. I've also noticed that the top is beginning to extend over the bottom... on the side with the PTT button. Is this my fault, or is everyone else having the same problem.
*To define: hold the phone in your hand, and place your thumb on the bottom-left corner of the top "slider-part", (could someone give me the word that should be used in place of "slider-part") push toward the right... Does the bottom, of the top, of your phone slide out by itself? Mine only moves about an 1/8th of an inch, but I'm curious if everyone shares this problem as well.
My phone slides out about the same 1/8 as yours, but i think it was like that even when it was brand new.
Yes it does happen to me, nothing perfect...it's just the sliding mechanism moving on one side and not the other..
I have the same movement on mine. My fuze is 7 weeks old, I use the sliding mechanism, on average, 3 times a day.
When I received my phone I double checked the sliding mechanism - the same movement was present when new. Based on other posts, this appears to be normal.
Other than that, my fuze is doing well. I purchased the ATT store cover (rubberized cover in two pieces) which is really good (although expensive ). I do find that the rubberized cover makes it difficult to put into my trouser pocket, thus I tend to carry it everywhere I go...
I've had that issue since I got it in Nov last year. Other than that, it's working and looking perfectly well. I should also note that I have an invisible shield that's working wonders for the phone. With it installed, I get a better grip on the phone (doesn't feel like I'm going to drop it), obviously no scratches, and fingerprint issues are far less severe.
My first phone slid off the rails too so I called AT&T and they sent me a reconditioned one. Now the slider on the new one actually pulls away from the main body. So I called AT&T again and they are sending me a another phone. Fingers crossed......
The play in the rails seems normal... I do about 4,500 texts a month... so slide open, slide closed over and over again... still holding strong had the Touch Pro since November of 08
My first kaiser (tilt) had that overhang when closed. It bothered me a lot. AT&T wouldn't exchange it, so I superglued a thin, tiny square of vinyl to the bumper at the end of the track to act like a shim, leaving the top and bottom flush when closed. The next two warranty exchanges I got (for other issues) had no such issue, and thankfully, neither does my fuze.
im uber careful with my phone but its so fragile its just breaking apart. the hard keys are coming up, the slider is now over like everyone else, there are small scratches everywhere, and kinda weird is the camera glass is broken around the edges.
My phone is holding up well with the rubberized cover
Holding up well to date, but seldom use the keyboard as have grown accustomed to using FITALY on the Fuze.
Also am using Capdase BiFold case for general protection + top shell of Innocase to help ward off the laminate separation that some users have complained of. (Also helps keep things from resting on the screen.)
May be Overkill, but hope to have this unit for some time....
Greetings folks...here's a question to any of you that have taken your devices apart.
Had a clumsy moment with my coffee and ended up spilling a small amount on the tf700 keyboard. Whoops. Did my best to suction the coffee out of the keys but had a problem with keys getting chorded due to the coffee (ie pressing "A" would give me "AB" and so on).
I took the dock apart to dry it out. Eventually I got 99% of the keyboard functionality back, but my caps lock, TAB and back-quote keys remain completely dead (the caps lock light won't even come on).
Is there some other way to get "inside" the actual keyboard part of the device? I was not happy to see that the keyboard itself is moulded and plastic-sealed right on to the inside of the dock metal (ie you can't unscrew it). Can you safely pop the keys off from the top? I have checked and double-checked the ribbon cables...they are clean and snapped into place on the small motherboard inside. I believe the keys are still working...if I hold down the "L" key and hit caps lock, the "L" key stops repeating so a signal is getting through. I think coffee gunk is still inside but since I can't actually take the keyboard itself apart, it's going to be hard to clean.
As an aside, what crappy worksmanship in this dock. Since day one the back part of the dock would "pop apart" if I had the tablet docked...now I know why, Asus manufacturing did NOT actually screw in the back screws hidden under the footpads. Doesn't happen now that I've "fixed" it. Oooh I voided my warrantee..
I'm also looking for an answer after an unfortunate incident with some tonic water (Damn high fructose corn syrup...). I also discovered the loose screws on my dock.
I bought my tf700t with tf201 dock second hand some 2 months ago. Everything worked perfectly up until 2 weeks ago. The previous owner had the thing rooted (build-number: TF700 CROMi-Xenogenesis 5.2.2-10.6.1.27.5 WW DEODEX). There are lots of people on the internet with the same kind of problems on unrooted tf700's so I don't expect it to be a problem with rooting.
What happens?
- The connection between dock and tablet seems to get lost, found again, get lost again etc. within minutes.
- I have a SD-card fitted in the dock and on the bottom of the screen I get messages that tell me he has found a SD-card. Then apparently it loses it again because a few minutes later the same message pops up again and again etc.
- In the beginning (and according to other people on the web still continuing) the tablet would only recognize the dock when charging. Without being plugged in it wouldn't be recognized at all. I opened up the dock and sprayed some contactspray where the cables come out of the hinge and want to connect to the small cable plugs on the dock, That seems to at least have worked to a certain extent, tablet and dock see each other. It says the keyboard should be used but then most keys won't work nor will the trackpad. Only the top row of keys keep functioning (except only the key in the top left corner (that flips a page backwards). But then again, sometimes you can use the keyboard on the dock for a while and then it's stops again (except for the top row of keys. They always work.)
- If I charge my dock to the max and then connect it with the screen most of the time it tells you that the battery of the dock is drained. Sometimes wiggling te tablet in it's slot brings back the battery to life.
Does anybody have a (possible) solution for these problems? I would be so grateful and so would a bunch of pitiful people roaming the back alleys of the internet in the hope of salvation.
One more thing. Several complainers have swiched dock and tablets and the problem seems to be with tablet. If the tablet is ok, then you fit any keyboard. If the tablet is dodgy it won't connect properly with any dock. At least that's what I hear.
Is there anybody with the brilliant solution or a hint at least? I started writing my bestseller on this thing, but like this it's going back to the study again in stead of to a nice terrace in the sun with drinks available.
Thanks in advance for all your trouble.
It looks like the problem is solved. I took the hinge apart, tightened all screws and bolts and put it back together. That seemed to do it .
Just so people don't have to look any further, here's how you take the hinge apart:
- Take out the 2 bolts on the outside of the hinge.
- On the inside of the hinge, on 'the bottom' are 3 pieces of plastic strip or adhesive tape (one approx. 12 cm long on the left side, one approx. 4 cm on the right side and on very small piece in between of 0.5 cm). Using tweezers and/or a scalpel-like knife, carefully peel away the longest strip of plastic working from the outside inwards. You will find three screws within the first 5 cm or so. Take them out. Stop peeling, leave the plastic strip around the data connector attached and start on the other end of this plastic strip, working from right to left. You'll find a screw immediately. Take it out, leave the rest of the strip attached. The 5th screw you'll find underneath the outer end of the 4 cm strip on the right side of the hinge.
- Now you can split the hinge in 2 parts. If necessary, use a small screwdriver at the outer ends to carefully wedge the hinge apart.
- In the part that's still connected to the dock you'll find 4 screws. The outer 2 have a tendency to become loose. Tightening them 'repaired' my dock.
My TF700 has recently developed erratic touch and screen behavior when docked.
Symptoms: Jumping screen - the image at times bounces around slightly
Phantom touches happen when touching the sceen OR the BACK of the tablet, and less frequently, when not touching the screen, but when holding the tablet where the screen angle may be moving slightly back and forth.
Sometimes, as well, the tablet does not respond to the keyboard. Changing the angle will sometimes remedy that.
It appears that this only happens when docked and may have to do with movement of the angle of the tablet in the dock. The problem seems to go away if I move the tablet/dock angle more vertical AND support it in the back to keep it from moving back and forth.
My unit is too old to be in warranty. At one point one of the plastic clips on the connector broke and I used epoxy to fix it. I also noticed that at one point, pushing the tablet back to too oblique an angle would actually cause the case of the dock to separate slightly.
It might be possible that some of the "phantom" touches that have been reported when a tablet is sitting untouched are due to vibrations in the room (walking etc) causing the tablet to move the docking angle sufficiently, resulting in the issues here.
Any ideas on how to steady the dock/tablet connection?
sounds more like your touch screen is failing, your fault desciption sounds just like mine did before I changed the touch screen and the issue has now gone away
Sent from my K00C using XDA Premium HD app
Update- Found a "fix" for now
EDIT: I ended up using self-stick velcro, just the fuzzy side. I put a 2 inch strip behind each hinge. The fit is quite tight, but that is what I was aiming for. Tablet is behaving OK.
I tried using my son's keyboard dock and the problem did no occur. It had considerably less play in it as well. I have temporarily concocted a fix -- I put a strip of material (a thin velcro tie wrap, because it was handy) along the inside back of the dock hinge before inserting the tablet. This tightened the connection sufficiently to keep the strange behavior from happening. Gotta come up with something a little more permanent, though. I'm thinking of trying label tape (like TZe Label Tape) until the thickness is right.