If you slide out the keyboard, and turn the device over, on the screen side above the htc logo there is a flap thing that you can slide down. What is this? It makes a bit of a noise when you open the keyboard, quite annoying.
steveoidm said:
If you slide out the keyboard, and turn the device over, on the screen side above the htc logo there is a flap thing that you can slide down. What is this? It makes a bit of a noise when you open the keyboard, quite annoying.
Click to expand...
Click to collapse
I think it's there to protect the ribbon cable that joins the screen to the base.
It must be something to do with the keyboard linking to the rest of the phone when the keyboard is in use. YOu'll notice that when the keyboard is slid shut the slider opens. It doesn't really bother me from a noise perspective.
Just makes the opening / closing mechanism feel a bit rubbish. When actually it isn't, its just you fell that thin bit of plastic moving around. Shame.
I noticed that too. As others have said I think it is a slide mechanism to protect the ribbon cable linking the two halves.
Oh well. I dont care. No other phone can do all this stuff!
Related
Can somebody please tell me how is the keyboard spring mechanism on their pros, on mine is not so solid like the tytnII and when i open or close the keyboard an annoying creaking sound is heard.
i can hear on my touch pro too... doesnt sound too well built
savvase said:
Can somebody please tell me how is the keyboard spring mechanism on their pros, on mine is not so solid like the tytnII and when i open or close the keyboard an annoying creaking sound is heard.
Click to expand...
Click to collapse
Been discussed before, .... the creaking / scraping noise is due to a cover that slides underneath the slider in order to protect the ribbon cable. If you have a closer look and prod, you will see this on the main unit part.
Yep. Its annoying. Can definitely live with it though.
Mine definitely doesn't have this, on the back side of the screen, the part that slides against the keyboard, is all solid plastic. Not sure why the euro version has it, seems like it'd be annoying.
Well, overall, I think the build quality of the Touch Pro is wonderfull! I love that its slightly heavy too!
But the keyboard slideoutmechanism, although very solid and robust gives away a worrying noise, sorta like its scraping against something. Anyone managed to confirm if this is nothing to worry about? I feel like I damage the device each time I pull it out.. lol
Regards
According to me that's the LCD flatcable cover sliding into place. With the device opened you'll find a little latch of sorts at the top of the screen back, that slides shut when opened and opens up to give the LCD flatcable some room to roll itself up in.
Nothing to worry about then!
When the screen is up to expose the keyboard there is a rattling sound. When the keyboard is down, no rattle.
who else has experienced this?
Do you think I should return it? If not, do you know what it is that rattles?
( this is not the "spring noise" that I have been reading about, at least I don't think it is)
mine does that
when its slid open there is a piece on the screen part on the side with the camera that can b moved
duno if its normal
Do you mean to say I can see the cause of the noise if I take the battery cover off, or did you disassemble your phone to find it?
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
well at least now I know what is rattling, thanks
np
but i would like to know if everyone has this
lbhocky19 said:
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
Click to expand...
Click to collapse
I see the same thing. looks like a cover plate for something.
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
It's the ribbon cable that connects the two halves of the phone. There is a little trap door there that covers it up while in the open position. If you watch it as you close the phone, the door opens as you slide it closed. But as it does that, it put tension on the spring, the tension keeps it tight when the phone is closed. When you open, no more tension and it has a little play in it. They should have spec'd the spring to have a little tension on it even in the open position so it would hold it still like when it's closed.
Oh well, probably some reason for it. Nothing to worry about at all though.
I was talking to my buddy at ATT last night. All the Fuze's have the rattle including mine. Nothing to worry
as long as it keeps the damn white screen away im happy
as long as it keeps the damn white screen away im happy
ya I was checking that out, it does look like all they needed was to keep a little spring tension on the door even when its all the way out
petard said:
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
Click to expand...
Click to collapse
Mine rattles when closed. annoying
It's a little annoying, not because of the sound but because it makes it seem that much less unfinished. For our money we shouldn't get rattling phones.
My Fuze never rattled til now...
Well, this seems to be a big issue. On mine, the spring doesn't seem to keep the trap door on the back of the display shut at all, its almost "jamming" sometimes when you close the keyboard. I shouldn't have to check to make sure nothing is in the way when retracting the keyboard.
I almost want to scotch tape the black trap door shut to keep it from moving around.
There is a "silver" rectangular metal plate connected to the tension spring that seems to have come loose somehow.
The black door can be slid back and forth freely, as there is "nothing" holding it shut.
I don't like lose metal parts moving around inside my electronics that aren't connected to things they should be. Not at what we paid for this thing.
I see dust problems in the display in the future. I wonder if its time for warranty action?
My fuze screen has became way to loose in the closed position. To provide a better example its like its got a hinge and wants to flip open rather then slide open. There is way too much up/down movement that way. Its so loose that when it vibrates the screen will vibrate on the casing and it makes or horrible rattle sound that makes me cringe every time I hear it. I have to hold the phone tight in my hand to stop the rattle. The weight of the screen will actually cause it to partly open by just flipping the phone over and holding the back.
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
I have a similar problem but not as severe. Mine is just a smidge loose and when I press down on the side of the screen it slides a few millimeters and it's really annoying when I hold the phone. Any help fixing would be appreciated.
yea same here, it's not annoying but I don't trust it
qtipextra said:
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
Click to expand...
Click to collapse
When I originally mentioned duct tape, I was being sarcastic. Ironically, however, this is my fix to this problem.
I used the Gorilla Tape brand, because that's what I had. All I did was put three pieces of black gorilla tape on the back of the slider. This tightened it up, and stopped my annoying rattle. Pretty simple and easy fix.
Also, it made the snap feel when it slides out much more firm, and I really enjoy the feel of it much more now.
Do any of you have this issue?
When you tap on the middle upper of the tablet a little bit hard it causes a vibrate clicky loose sound like the components behind are loose?
I only noticed it today and im sure it wasn't like this before or if it was not so prominent.
Im out of my retailers return window so if anything needs to be fixed I'll have to go to samsung.
The device functions ok but im just a little concerned the screenis coming loose or thr digitizer..thevibration clicky sound is quite annoying and i can't remember if it used to be there i think it might as directly behind where it rattles is the camera and above the battery and speakers. I just hear and feel a vibrating rattling sound which annoys me and feels like the build is poor. Can you guys try tapping the middle upper of your tablet quite hard or moderqtely and see if you have same issue?
What do you think has happend screen coming loose?
I think the resistive and conductive layers of the screen have come loose from the hard tapping.
If i hold down the middle of the screen and release it makes a 'sticky' sound. What is likely to happen if this continues?
From reading it says the resistive and conductive layers come in constant contact meaning it. Ould misinterpret commands.
Is it possible the screen is just loosened from the digitizer or is it more likely the 2 layers of resisitive and conductive layer are loose?
Does anyone know what this is?
It is so annoying in certain parts of the screen it seems to be looose hence the tapping. Is the glue loose or the screen coming apart?
If i lie it flat on a table there is less rattling when i type but when i put it in my case to hold it up the clicky rattling sound is more im just worried it's going to collapse at some point. Can anyone fathom what might be causing this?
It feels like the creen has come loose slightly in certain parts of the screen as if i tap on the opposite side across the screen it seems to c9rrect this issue for a few secs which leads me to think the screen is coming loose
Ive just realised now it's the back cover which is loose or the insides.
It seems by me pressing down on the front screen too much and the back of the tablet not completely heald down on a flat hard surface t has somehow caused the back cover to come loose of the parts inside have come loose by being forced back slightly.
Does anyone guess what is hppening?
When i flip over the tablet and press the back and tap the back cover on the right side it sounds loose and if i press on it there is some give like there is some space.
So ive identified what is thr cause of this and it's that my case which has rubber corners which hold it against the back of the backbpard leaves a gap between tge tablet and the backboard of the case cover. When i tap the screen too hard it causes a flex ehich unfortunately has caused the tablettobend and push the motherboard and insides onto the back cover which hss now flexed and stretched i presume? Or it has xaused the components to dislodge and misplace, can the back cover actually stretch this much?ithought it wad hard pladtic that retains its shape
I heard the tab s creaks also but mine is the back cover has stretched out fr8m within not holding the components snuggly if that makes sense. What is the fix for this?