My fuze screen has became way to loose in the closed position. To provide a better example its like its got a hinge and wants to flip open rather then slide open. There is way too much up/down movement that way. Its so loose that when it vibrates the screen will vibrate on the casing and it makes or horrible rattle sound that makes me cringe every time I hear it. I have to hold the phone tight in my hand to stop the rattle. The weight of the screen will actually cause it to partly open by just flipping the phone over and holding the back.
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
I have a similar problem but not as severe. Mine is just a smidge loose and when I press down on the side of the screen it slides a few millimeters and it's really annoying when I hold the phone. Any help fixing would be appreciated.
yea same here, it's not annoying but I don't trust it
qtipextra said:
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
Click to expand...
Click to collapse
When I originally mentioned duct tape, I was being sarcastic. Ironically, however, this is my fix to this problem.
I used the Gorilla Tape brand, because that's what I had. All I did was put three pieces of black gorilla tape on the back of the slider. This tightened it up, and stopped my annoying rattle. Pretty simple and easy fix.
Also, it made the snap feel when it slides out much more firm, and I really enjoy the feel of it much more now.
Related
When the screen is up to expose the keyboard there is a rattling sound. When the keyboard is down, no rattle.
who else has experienced this?
Do you think I should return it? If not, do you know what it is that rattles?
( this is not the "spring noise" that I have been reading about, at least I don't think it is)
mine does that
when its slid open there is a piece on the screen part on the side with the camera that can b moved
duno if its normal
Do you mean to say I can see the cause of the noise if I take the battery cover off, or did you disassemble your phone to find it?
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
well at least now I know what is rattling, thanks
np
but i would like to know if everyone has this
lbhocky19 said:
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
Click to expand...
Click to collapse
I see the same thing. looks like a cover plate for something.
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
It's the ribbon cable that connects the two halves of the phone. There is a little trap door there that covers it up while in the open position. If you watch it as you close the phone, the door opens as you slide it closed. But as it does that, it put tension on the spring, the tension keeps it tight when the phone is closed. When you open, no more tension and it has a little play in it. They should have spec'd the spring to have a little tension on it even in the open position so it would hold it still like when it's closed.
Oh well, probably some reason for it. Nothing to worry about at all though.
I was talking to my buddy at ATT last night. All the Fuze's have the rattle including mine. Nothing to worry
as long as it keeps the damn white screen away im happy
as long as it keeps the damn white screen away im happy
ya I was checking that out, it does look like all they needed was to keep a little spring tension on the door even when its all the way out
petard said:
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
Click to expand...
Click to collapse
Mine rattles when closed. annoying
It's a little annoying, not because of the sound but because it makes it seem that much less unfinished. For our money we shouldn't get rattling phones.
My Fuze never rattled til now...
Well, this seems to be a big issue. On mine, the spring doesn't seem to keep the trap door on the back of the display shut at all, its almost "jamming" sometimes when you close the keyboard. I shouldn't have to check to make sure nothing is in the way when retracting the keyboard.
I almost want to scotch tape the black trap door shut to keep it from moving around.
There is a "silver" rectangular metal plate connected to the tension spring that seems to have come loose somehow.
The black door can be slid back and forth freely, as there is "nothing" holding it shut.
I don't like lose metal parts moving around inside my electronics that aren't connected to things they should be. Not at what we paid for this thing.
I see dust problems in the display in the future. I wonder if its time for warranty action?
Ran across this today searching for cases for the Epic. Anyone using one? Its interesting in that it locks the slider during normal use and hinges open if you want to use the keyboard.
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001061&products_id=31414
Now this looks like quite a nice case for functionality.
Now if they just took off the whole part in the back for the clip and form fit the corners a bit more and offered it in more colors that'd be nice.
This may be the best thing I can do for now, I have been scouring for a jelly case to slip over the epic, since I never use the keyboard
Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?
bitbang3r said:
Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?
Click to expand...
Click to collapse
There are videos on you tube. The bottom looks like a very snug press fit. Top must be looser to allow for the hinge to work.
Sent from my SPH-D700 using Tapatalk
...
I had a similar case for my old HTC Titan. I LOVED it. Being a pretty serious phone abuser, that case kept my phone together!
-Rob
I used to have a similar case for my Treo and they are extremely well made. I irregularly dropped my phone from about 5 feet in the air onto hard linoleum and it never suffered any indignities. These come in both black and silver so if you want a different color you would want the silver so you could send it out to be powder coated.
I just ordered one.
Mine came last night.
The good: locks the slider firmly closed. No wobble or "play" at all when pressing the power button. Phone easy to remove (for GameGripper purposes).
The bad: Feels terrifyingly slippery compared to the Seidio ActiveX. Obstructs "slide down" gesture for notifications.
The seemingly fatal (a big one): my "back" fake hardkey keeps randomly going berserk... but ONLY that specific one. The foam in the top half seems to be confusing the capacitive sensor.
Sent from my SPH-D700 using XDA App
Update: I've had the 'search' fake hardkey freak out a few times on me, too.
Another problem: it's definitely affecting reception. 4G and GPS barely work with the case in place.
Sigh. So close. So agonizingly close. It's awesome to not have the phone shear and jiggle apart every time I hit the power button, and the fact that it allows the phone to be easily removed for the Game Gripper without really compromising the slide-out keyboard's usability is very cool.
I'm really convinced that this case went straight from plastic prototype to mass production before anyone actually tried to use it in an area with 4G service, high humidity (presumably what's screwing up the foam and touchscreen), and who didn't just assume that the GPS was dysfunctional because Samsung sucks.
Sigh. Too expensive to throw away, and really nice in ways that ultimately don't matter because the touchscreen-button problem makes it totally unusable
The plot thickens: more touchscreen observations:
* Oddly, there's NO FOAM around the lower part of the screen where the phantom-pressed fake hardkeys are.
* Last night, it went completely berserk with phantom button presses on cue when I rubbed the latch a certain way.
This suggests that the problem's root cause might extend to the electrical conductivity of the case itself. It's strange, because I wasn't able to find reports of the same problem for users of Monaco cases for other phones (like the Droid). Lots of complaints about signal attenuation, but no reports of touchscreen problems.
I'm seriously tempted to buy some liquid electrical tape and coat the inside of the lid to see whether it helps. The problem DOES seem to go away when the lid is no longer in contact with the screen. However, if it's happening because the sensor is acting kind of like a Hall Effect sensor and the case is acting like a Faraday cage, nothing short of making the case (or at least the top lid) out of plastic is likely to fix the problem. Still, it's worth a try since I really like the case itself, and my alternative is to basically chuck it.
Update: as an experiment, I wrapped black electrical tape around the bottom lip of the top part. It helped a lot. I think I might have also found a contributing cause: cat fur. I think wisps of cat fur might be bridging the metal case & screen and carrying static electricity to the sensor. Oddly, though, some of its *worst* back-arrow spasams have occurred with the phone laying on the desk, untouched, 3 feet away.
I'm still trying to think of a good way to plastic-coat the case without making it look bad & get a nice, even black rubbery coating on it.
Sent from my SPH-D700 using XDA App
How thin is it compared to the other plastic cases?
Very interested in getting the Monaco Aluminum Case, which is very similar to this one. My last concern, how thin is it compared to Seidio Innocase Surface?
I have heard a number of people complaining about how hard it is to get tghe covers off the back side of our beloved Inspire 4Gs. Quite often damage ensues, right? The cover tabs get broken and then it sips off all too easily. Or maybe it split into two pieces.
This may not work for everyone, but it did for me.
1. Flip the phone face down
2. Lightly grip the SIDES of the end cap
3. Gently pull off
not so fast my friend
Sorry, I know you're trying to be helpful, but this is the exact way that I snapped my SD Card / SIM cover in half the second day I had the phone. Putting pressure on the sides while you pull it off can easily snap it once it slides off. The best method is to put the device face down and put downward pressure on the cover while you slide it off. It may take longer, but it won't snap it.
Yeah don't push on the sides. After a few removals, I found it got a lot easier to get off anyways.
Agree with the two above me. I was pressing on the sides to take it off and after a few tunes it got really loose. It would shift a little whenever I touched it much. I brought it in to a store and they swapped it out for me. Now I push down gently while sliding it out and have had no issues since.
Sent from my Desire HD using XDA App
Are people using only their thumb and finger to remove this?
It's much easier if you grip the entire cover with the top half of your hand and pull down.
This method creates more force without applying too much inward pressure on the sides of the cover.
ButtonBoy said:
I have heard a number of people complaining about how hard it is to get tghe covers off the back side of our beloved Inspire 4Gs. Quite often damage ensues, right? The cover tabs get broken and then it sips off all too easily. Or maybe it split into two pieces.
This may not work for everyone, but it did for me.
1. Flip the phone face down
2. Lightly grip the SIDES of the end cap
3. Gently pull off
Click to expand...
Click to collapse
Side note, but I love your signature.. I went from an Iphone original, to a TP2, and in a week, I will have the Inspire.
I just started developing this odd creaking noise near the bottom and sides of my S4G. Even with a Seidio Active case wrapped around it, the creaking can be felt and heard when hitting the bottom buttons.
The fix is pretty easy. You just need to decrease the amount of movement the back cover has.
I had some .010 mil fiber (fish) paper laying around so I cut a small square that covers the sim card and microsd card area. You can probably use something else, but hey, why not use some insulated paper if you have it.
Lay the paper on top of the area and then slowly place the back cover back on. No holes are in that area above the sim and microsd, so no worries there. You should see an immediate improvement
I needed more than that to stop the creaking/screen movement.
Pathetic we have to go to these lengths
jlevy73 said:
I needed more than that to stop the creaking/screen movement.
Pathetic we have to go to these lengths
Click to expand...
Click to collapse
What did you have to do?
I tried used two squares of paper, but that made the back bulge out a little too much to my liking.
GideonX said:
What did you have to do?
I tried used two squares of paper, but that made the back bulge out a little too much to my liking.
Click to expand...
Click to collapse
I took a post-it and folded it twice. Then placed it on the bottom right area and closed up the cover. For me when I press down on the bottom right side of the screen the whole screen sort of depresses a bit. Only way I could get rid of that was to place the paper in that region. Problem solved.
Post it would have been my backup method
Sent from my HTC Sensation 4G
buy another battery, i recently got an anker also had the creaking problems, noticed the anker is a TINY bit thicker than the stock battery and it removed that problem completely. and that anker battery was DIRT cheap
I just lined the case with some scotch tape. from the bottom to about 3/4 of the way up. I just went around the antenna nubs and the usb hole.
Posted this in another thread, but felt it was valuable here too...
Got the creaking here also, definitely a design flaw. Being obsessive with my devices i couldnt live with it!
I do not recommend putting paper in the cover to fill the gap, as this is just expanding the cover further making it even MORE loose when the paper is not in there. Also i wouldn't recommend it because the paper pushes the back cover out a little more, you may loose a connection for the ground. Which is the little metal springy thing, half way up the right hand side. Obviously its not a good idea to 'push' the cover further away from this ground spot. I have heard that people have had issues with screen responsiveness due to a static build up from not grounding properly.
What i did to fix this problem was a bit of a kitbash of sorts.
Mine was creaking on the bottom right area, like most. The problem is there is too much play between the little black catches on the battery cover and the latch on the handset. Instead of filling up the gap between the phone and the cover (Ala paper, card in the cover) I closed it!
What you need to do is get some very thin plastic film. Like that on kids toy packaging etc. Not the thicker stuff though. This stuff would be under 1mm thick. It came as a viewing window in the box my new wallet came in. So you can sorta imagine what im talking about.
I cut a piece about 10mm long and as wide as one of the two little black catches. I applied a VERY thin coat of super glue to one end of the film. Just enough to cover the area under the catch. Then i carefully placed the film with the superglue on it under the catch, and then quickly applied some pressure to it with some tweezers. Then i carefully cut the excess off with a pair of finely tipped nail scissors.
The result is that it now PULLS the screen/phone INTO the cover more by making the little black catch thicker. Not the opposite (paper method), which pushes the cover out, creating a further problem of adding more paper under the cover over time as the cover expands/loosens to compensate. Not to mention a possible grounding loss and resulting damage.
Hope this helps some people that have had multiple replacements or could not be bothered replacing for such a cosmetic issue. (Like me). It definitely works, just got to get your surgeon on and be accurate with your placement of the film.
Apply this to what ever side creaks the most, and bam its gone. Nice. Solid phone... again.
If anyone wants more specific details etc, im all ears.
Regards,
Matt.
will try it with an double side film ...
i mean a film that hold back cover and phone together ;-) i think doing paper in there will do damage with time
I contacted HTC and they sent me another/new one. No more creaking!
RaptorRVL said:
I contacted HTC and they sent me another/new one. No more creaking!
Click to expand...
Click to collapse
Back cover or whole phone?
I have the same problem too. And it just seems to get more and more "cracking"
Do any of you have this issue?
When you tap on the middle upper of the tablet a little bit hard it causes a vibrate clicky loose sound like the components behind are loose?
I only noticed it today and im sure it wasn't like this before or if it was not so prominent.
Im out of my retailers return window so if anything needs to be fixed I'll have to go to samsung.
The device functions ok but im just a little concerned the screenis coming loose or thr digitizer..thevibration clicky sound is quite annoying and i can't remember if it used to be there i think it might as directly behind where it rattles is the camera and above the battery and speakers. I just hear and feel a vibrating rattling sound which annoys me and feels like the build is poor. Can you guys try tapping the middle upper of your tablet quite hard or moderqtely and see if you have same issue?
What do you think has happend screen coming loose?
I think the resistive and conductive layers of the screen have come loose from the hard tapping.
If i hold down the middle of the screen and release it makes a 'sticky' sound. What is likely to happen if this continues?
From reading it says the resistive and conductive layers come in constant contact meaning it. Ould misinterpret commands.
Is it possible the screen is just loosened from the digitizer or is it more likely the 2 layers of resisitive and conductive layer are loose?
Does anyone know what this is?
It is so annoying in certain parts of the screen it seems to be looose hence the tapping. Is the glue loose or the screen coming apart?
If i lie it flat on a table there is less rattling when i type but when i put it in my case to hold it up the clicky rattling sound is more im just worried it's going to collapse at some point. Can anyone fathom what might be causing this?
It feels like the creen has come loose slightly in certain parts of the screen as if i tap on the opposite side across the screen it seems to c9rrect this issue for a few secs which leads me to think the screen is coming loose
Ive just realised now it's the back cover which is loose or the insides.
It seems by me pressing down on the front screen too much and the back of the tablet not completely heald down on a flat hard surface t has somehow caused the back cover to come loose of the parts inside have come loose by being forced back slightly.
Does anyone guess what is hppening?
When i flip over the tablet and press the back and tap the back cover on the right side it sounds loose and if i press on it there is some give like there is some space.
So ive identified what is thr cause of this and it's that my case which has rubber corners which hold it against the back of the backbpard leaves a gap between tge tablet and the backboard of the case cover. When i tap the screen too hard it causes a flex ehich unfortunately has caused the tablettobend and push the motherboard and insides onto the back cover which hss now flexed and stretched i presume? Or it has xaused the components to dislodge and misplace, can the back cover actually stretch this much?ithought it wad hard pladtic that retains its shape
I heard the tab s creaks also but mine is the back cover has stretched out fr8m within not holding the components snuggly if that makes sense. What is the fix for this?