When the screen is up to expose the keyboard there is a rattling sound. When the keyboard is down, no rattle.
who else has experienced this?
Do you think I should return it? If not, do you know what it is that rattles?
( this is not the "spring noise" that I have been reading about, at least I don't think it is)
mine does that
when its slid open there is a piece on the screen part on the side with the camera that can b moved
duno if its normal
Do you mean to say I can see the cause of the noise if I take the battery cover off, or did you disassemble your phone to find it?
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
well at least now I know what is rattling, thanks
np
but i would like to know if everyone has this
lbhocky19 said:
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
Click to expand...
Click to collapse
I see the same thing. looks like a cover plate for something.
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
It's the ribbon cable that connects the two halves of the phone. There is a little trap door there that covers it up while in the open position. If you watch it as you close the phone, the door opens as you slide it closed. But as it does that, it put tension on the spring, the tension keeps it tight when the phone is closed. When you open, no more tension and it has a little play in it. They should have spec'd the spring to have a little tension on it even in the open position so it would hold it still like when it's closed.
Oh well, probably some reason for it. Nothing to worry about at all though.
I was talking to my buddy at ATT last night. All the Fuze's have the rattle including mine. Nothing to worry
as long as it keeps the damn white screen away im happy
as long as it keeps the damn white screen away im happy
ya I was checking that out, it does look like all they needed was to keep a little spring tension on the door even when its all the way out
petard said:
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
Click to expand...
Click to collapse
Mine rattles when closed. annoying
It's a little annoying, not because of the sound but because it makes it seem that much less unfinished. For our money we shouldn't get rattling phones.
My Fuze never rattled til now...
Well, this seems to be a big issue. On mine, the spring doesn't seem to keep the trap door on the back of the display shut at all, its almost "jamming" sometimes when you close the keyboard. I shouldn't have to check to make sure nothing is in the way when retracting the keyboard.
I almost want to scotch tape the black trap door shut to keep it from moving around.
There is a "silver" rectangular metal plate connected to the tension spring that seems to have come loose somehow.
The black door can be slid back and forth freely, as there is "nothing" holding it shut.
I don't like lose metal parts moving around inside my electronics that aren't connected to things they should be. Not at what we paid for this thing.
I see dust problems in the display in the future. I wonder if its time for warranty action?
Related
It seems that lately, when the phone slide is closed, I am able to separate the phone from itself by about 1mm to 1 1/2 mm...seems as if the sliding mech. is losing its hold on the phone (even by a bit)...
when I use the screen to type, I hear it clicking/taping against itself--
anyone else having this situation arise?
Slowly evolving into a tilt here...
Same here, it sucks. I will probably sell it before it is too much and then buy a Touch Pro 2. But Mine is loose on the side where there is no slide (left), it is still strong on the right side.
Mine's still good and pretty snug. I baby it tho. Still wondering for that first drop. I hate dropping my babies. Lol.
yea, mine is doing great,
Ive dropped it a couple of times, yet it still seems as strong as it was when i got it. I also have a snug fitting plastic cover on mine, so that helps it even more.
Service Manual for the HTC Touch Pro/Raphael
Mine got a bit funny too - after it came back from HTC service center for screen replacement. However, I'm planning on dissmanteling my Raph and check for loosen screws.
If you guys wanna give it a try too, I'm attaching a link for official Service Manual for the HTC Touch Pro/Raphael - it's a hardcore, step-by-step how to dissmantle Raphael down to the smallest pieces ....have fun!
http://www.megaupload.com/?d=3IOVUX7P
Original link and credit goes to:
http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
i guess if push comes to shove I'll rip this baby apart and see if I need to tighten up some of the lose parts-IF it gets bad.
I baby my phone as well, and have only had it for 4 months.
Eh, if it's put back together, and it works, then that means these extra screws weren't that important to begin with.
First was buggy, now cool
My first fuze made a weird sound but i replaced it and I haven't heard anything from this one
I don't think screws would be the culprit. The slider is on rails isn't it? So the fix would be to bend/tighten/replace the rails?
Mine is getting a little sloppy. I hate having the volume buttons on the top screen portion too. Every time I try to press it, the phone will more apt to try to open then press the button in.
sometimes my sliding mechanism is a bit slow to catch up with the body i.e it can slide out ok, but if you look at the back of the screen when the kb is open, there's a small rectangle i guess where the ?cables go. sometimes mine stays there for a few seconds, then goes down. if this makes sense to people.
bauerpavel: that's my blog you quoted. another
My fuze screen has became way to loose in the closed position. To provide a better example its like its got a hinge and wants to flip open rather then slide open. There is way too much up/down movement that way. Its so loose that when it vibrates the screen will vibrate on the casing and it makes or horrible rattle sound that makes me cringe every time I hear it. I have to hold the phone tight in my hand to stop the rattle. The weight of the screen will actually cause it to partly open by just flipping the phone over and holding the back.
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
I have a similar problem but not as severe. Mine is just a smidge loose and when I press down on the side of the screen it slides a few millimeters and it's really annoying when I hold the phone. Any help fixing would be appreciated.
yea same here, it's not annoying but I don't trust it
qtipextra said:
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
Click to expand...
Click to collapse
When I originally mentioned duct tape, I was being sarcastic. Ironically, however, this is my fix to this problem.
I used the Gorilla Tape brand, because that's what I had. All I did was put three pieces of black gorilla tape on the back of the slider. This tightened it up, and stopped my annoying rattle. Pretty simple and easy fix.
Also, it made the snap feel when it slides out much more firm, and I really enjoy the feel of it much more now.
just been using google skymap and I've noticed there is something rattling inside my transformer!!!!!!
is the back removable? anyone spotted a way something could have got inside? or is it something broken inside?????
its not been dropped or anything ........ and I've only just started noticing the noise .....
you sure it isn't edge creak? if it really is ratteling return it.
not a creak. something moves inside the unit from one end to the other. only started tonight. thing is I have no light bleed no sharp edges ....... don't know if its just something got in through a gap somewhere or something snapped off inside
My opinion would be return it, sure it could be harmless but it's still a faulty product. It could also **** up your device later on or be a sign of more ominous things.
I know you are right .... but I bought it from comet and it took long enough to arrive so god knows how long a replacement will take
and sods law ill get light bleed or gaps or sharp edges next time
ill ring comet tomorrow
wilbur-force said:
just been using google skymap and I've noticed there is something rattling inside my transformer!!!!!!
is the back removable? anyone spotted a way something could have got inside? or is it something broken inside?????
its not been dropped or anything ........ and I've only just started noticing the noise .....
Click to expand...
Click to collapse
If you enable and disable the camera it makes a sound. Try activating camera ....is that the same noise you hear?
wilbur-force said:
just been using google skymap and I've noticed there is something rattling inside my transformer!!!!!!
is the back removable? anyone spotted a way something could have got inside? or is it something broken inside?????
its not been dropped or anything ........ and I've only just started noticing the noise .....
Click to expand...
Click to collapse
If you enable and disable the camera it makes a sound. Try activating camera ....is that the same noise you hear?
I know there are 2 openings right under the LCD itself cover. On the left hand side there is tow half inch hole under the LCD, if you take a piec of paper and insert it at the left hand edge and sort of drag it down...you'll know where the gaps are, but this is too small for anything to go through...maybe these are air vents.
its not the camera. I'm sat here web browsing and if I rotate landscape and portrait it hear something moving.
not sure I follow what you mean about the holes. wondering if something has got in through the keyboard dock points???
It's probably baby teeth. I hear they're good luck.
stuntdouble said:
It's probably baby teeth. I hear they're good luck.
Click to expand...
Click to collapse
Or the hamster fell out of the wheel
Sounds like another asus QC story, i wonder what crazy stories will come next?
Good luck with getting it resolved.
Photo cameras have mechanical orientation sensors that are making a noise when going from landscape to portrait but they are very quiet and I doubt they are used in phones and tablets which have accelerometers.
this was something definitely moving about..... ie traveling the length and width of the unit.
its stopped now though so I haven't got a hope in hell of persuading comet that "my unit was rattling, honest! "
don't worry about persuading comet...just give them a call and they'll replace it...
I asked for a replacement yesterday..and I believe the support guy had no idea what a light bleed is, and he tole me parcelforce will come my home with a new TF on Monday..
damn.... after a week of no rattling its started again. I'm convinced its just a fragment of plastic or something and apart from that the unit is perfect .... no light bleed or dead pixels or dust ....
do I risk exchanging?
I wonder how easy it is to get the back off?
wilbur-force said:
damn.... after a week of no rattling its started again. I'm convinced its just a fragment of plastic or something and apart from that the unit is perfect .... no light bleed or dead pixels or dust ....
do I risk exchanging?
I wonder how easy it is to get the back off?
Click to expand...
Click to collapse
You might try a magnet and see if you can move the fragment within the case. Of course, it could use aluminum screws but metal will have more mass than plastic. If it tends to roll easily, I would suspect a metal fragment.
levenite said:
You might try a magnet and see if you can move the fragment within the case. Of course, it could use aluminum screws but metal will have more mass than plastic. If it tends to roll easily, I would suspect a metal fragment.
Click to expand...
Click to collapse
That's a good way to screw up other components inside your device. I wouldnt do that if I were you.
lol, no, i think i will avoid the magnets thanks
.... sent from my shiny new keyboard that arrived this afternoon by the way
My battery cover is a little loose all of a sudden. at the bottom it now moves a little. When I squeeze (lightly, normal use amount) the phone at the bottom kinda clicks. Anyone else have this issue?
Yes. I called HTC and they're replacing it. But for now what you can do is put paper inside the case
Sent from my HTC Sensation 4G using XDA App
Yeah, several other people reported this problem on a Dutch forum. People should not open the backcover unless they really have to. After opening the cover a few times the cover is getting loose and starts to crack when you press it.
okay so I have the same problem, should I be worried or is it just the case with all sensation handsets ?
Take the cover off and press the battery. I think that's what it is...or maybe both.
Sent from my HTC Sensation 4G using XDA Premium App
secano said:
Take the cover off and press the battery. I think that's what it is...or maybe both.
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
I don't think that's it, the battery is fitted normally, and I've just tested it with battery removed, it does the same thing, I should mention that it isn't really that obvious, but it's an annoyance nonetheless, such an expensive phone to have a glitch like that.
can anybody confirm that it does loosen after some time of usage, I mean did it came like that out of the box or was it getting loose with time?
I just noticed this on mine this morning , will steal a new cover soon
****ttttt let me check mine lol
...same here, at the right bottom corner!!!!
...and I agree, tooooo expensive phone for such a glitch!
Spekko said:
I just noticed this on mine this morning , will steal a new cover soon
Click to expand...
Click to collapse
I went to a tmobile store to see if they'll let me switch. The rep told me thy they can't switch cuz its an htc problem. Then he got curious and pulled out his sensation to see if his had it...
He looked so sad lol I just got off the phone with htc and my replacement cover is shipping soon and if the second one is defective then I have to send in my whole phone so they can check it out. You guys should call htc I'd you already haven't
I fixed mine by adding some paper to the back.
http://forum.xda-developers.com/showthread.php?t=1215096
Hey first post here! Signed up just to have my say on this issue, just as i did with the android central forum.
Also posted this on the android central forums...
Got the creaking here also, definitely a design flaw. Being obsessive with my devices i couldnt live with it!
I do not recommend putting paper in the cover to fill the gap, as this is just expanding the cover further making it even MORE loose when the paper is not in there. Also i wouldn't recommend it because the paper pushes the back cover out a little more, you may loose a connection for the ground. Which is the little metal springy thing, half way up the right hand side. Obviously its not a good idea to 'push' the cover further away from this ground spot. I have heard that people have had issues with screen responsiveness due to a static build up from not grounding properly.
What i did to fix this problem was a bit of a kitbash of sorts.
Mine was creaking on the bottom right area, like most. The problem is there is too much play between the little black catches on the battery cover and the latch on the handset. Instead of filling up the gap between the phone and the cover (Ala paper, card in the cover) I closed it!
What you need to do is get some very thin plastic film. Like that on kids toy packaging etc. Not the thicker stuff though. This stuff would be under 1mm thick. It came as a viewing window in the box my new wallet came in. So you can sorta imagine what im talking about.
I cut a piece about 10mm long and as wide as one of the two little black catches. I applied a VERY thin coat of super glue to one end of the film. Just enough to cover the area under the catch. Then i carefully placed the film with the superglue on it under the catch, and then quickly applied some pressure to it with some tweezers. Then i carefully cut the excess off with a pair of finely tipped nail scissors.
The result is that it now PULLS the screen/phone INTO the cover more by making the little black catch thicker. Not the opposite (paper method), which pushes the cover out, creating a further problem of adding more paper under the cover over time as the cover expands/loosens to compensate. Not to mention a possible grounding loss and resulting damage.
Hope this helps some people that have had multiple replacements or could not be bothered replacing for such a cosmetic issue. (Like me). It definitely works, just got to get your surgeon on and be accurate with your placement of the film.
Apply this to what ever side creaks the most, and bam its gone. Nice. Solid phone... again.
If anyone wants more specific details etc, im all ears.
Regards,
Matt.
MrSoulSOng A video explaining this fix would be appreciated ^_^ cuz I didnt buy my phone from here and I still gotta wait for about a month to send it to the shop to fix or get a replacement
...just an update...after buying new back cover from no1tech (that was month and a half ago...) there's no loose spots, no creacking...!
Very satisfied now I am. Finally phone feels and looks like it should be - beast in compact housing!
I have the very same problem too. VERY annoying
well I had the same problem however what i did was that on the back cover inside of it I put some black electric tape on to the sides that creak (next to the sides and the clips) and when I put the cover back on there was no creaking at all. figured it wont interfere with the single because people put cases on the back all the time plus its electric tape meaning it'll prevent from short circuits and I don't think there should be any overheating issue as its a very small quantity.
Took my 3 weeks old flip to get fixed because of the popping sound it made. When opened, just below the grease, on the right edge of the phone. When I slide my finger or press on the spot, it gives a pop sound (and feeling to the finger). You can feel the screen moving up and down and after you lift your finger, it pops off from the residue/glue under the display. It is like there is a tape that does not stick.
There is a reddit post about this so this is just an extra data about the defect, just in case if Samsung won't repair or something.
So, it would be nice to hear if someone else has this problem too. Thanks.
Mine just did it last night, it's on the right side too, where I've seen the others. I'm gonna do my best to ignore it lmao
My first unit had this problem too, it wouldn't lay completely flat when open either. I think the popping/screen detachment might be related to the hinges not opening fully cause whenever I'd force it open flat, the screen wouldn't pop anymore. In the end I returned it and my new one is perfect, no popping and it lays flat. If this is happening to yours, either return it or get it fixed.
kabuk1 said:
My first unit had this problem too, it wouldn't lay completely flat when open either. I think the popping/screen detachment might be related to the hinges not opening fully cause whenever I'd force it open flat, the screen wouldn't pop anymore. In the end I returned it and my new one is perfect, no popping and it lays flat. If this is happening to yours, either return it or get it fixed.
Click to expand...
Click to collapse
Never realized it was supposed to lay completely flat. No popping, so I guess it doesn't matter.
I'm pretty sure the root of this issue is hinge unevenness(if that's a word) side-to-side, I put a spigen hinge film on the other day and it's very noticable in the indent across the middle of the film from the phone pinching against it. The side with the pop is closing further and pressing a groove into the film while the other side is a barely visible line. I'll try to post a pic later I traded in all of my old phones for this one lmao
kowalskitg said:
I'm pretty sure the root of this issue is hinge unevenness(if that's a word) side-to-side, I put a spigen hinge film on the other day and it's very noticable in the indent across the middle of the film from the phone pinching against it. The side with the pop is closing further and pressing a groove into the film while the other side is a barely visible line. I'll try to post a pic later I traded in all of my old phones for this one lmao
Click to expand...
Click to collapse
Also mine went away today, screen 100% back to normal. I got my phone thoroughly wet in the shower today trying to get dust out of the edges, might be related might not. At any rate, good to know that it's not a big deal, if you have this issue it just might fix itself after a week
I have the same on mine. It only affects the lower left quadrant. Pretty annoying.