Database Info

[Completed] How i install preloader on MTK 6589 bricked phone?

My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool. Is it any problem with my Motherboard.)

Hi there,
I'm sorry but I can't find anything related to your question/device because we don't have any forum/thread with development for this device.
Please post that in the forum bellow for more answers from the experts. Register an account on XDA for that.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Pc not detecting mtk phone .. after flashing wrong preloader.. help !!

I have a karbonn a1+ champ with mt6571 ... it was working well .. but i decided to flash cusstom rom but flashing failed ... so i was going to flash the stock rom ... but somehow i formatted the whole phone using sp flash tools with bootloader ...
now pc is detecting the phone as it was getting detected but it is not coming in download mode... as it used to come by pressing the volume down key ... and windows is auto detecting it as mtk vcom usb preloader port .. and ssp flash tools is giving error 4032... please help ...

CAN ANYONE HELP???

HI,
Thanks for writing to us at XDA Assist.
There is no forum for your device at this time but you may want to ask your question with all relevant details in the general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Good luck.
BTW do not "bump" a thread more than once per 24 hours. Thank you.

[Completed] HELP !!

Hello! A week ago i hard-bricked my android device (alcatel ot x'pop 5035x). I am pretty sure that is a hard brick because it isn't turning on, it doesn't charge and nothing happens if I connect it to my PC throush USB. All this because I flashed a stock rom downloaded from 4pda. I used SP FlashTool. After I choose the scatter file; some of that options were already ticked (preloader, uboot, bootimg, recovery) and I ticked 2 more: android and nand. Since then my phone didn't boot.
Sorry for my bad english, I hope you understand.

Hi
Thanks for writing to us at XDA Assist.
I didn't find anything to fix your issue. Try asking in the Android Q&A forum where you may get better help:
Android Q&A, Help & Troubleshooting
Good luck!

[Completed] Lenovo Tablet S6000L

Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.

Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck

[Completed] Sophone i6 plus soft bricked please help

Guys
I just bought a sophone i6 plus with an mtk6582
I tried flashing gapss on it via zit flasher and now it is stuck in bootloop
I tried factory resetting it from the recovery....still stuck
Now the problem is that i cant get it to work with sp flash tool.....maybe it is bcoz the debugging is disabled bcoz i just factory reset the phone
Every time i connect the turned off phone to sp flash tool....instead of flashing ....the phone just starts to charge and nothing happens
I tried all maximum usb drivers......i dont wnow how to open bootloader......its not working with adb either.......so basically its just stuck in bootloop only.
Pl help
Thabks

Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find any information about your problem on your device. However, I would recommend posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios