Database Info

[Completed] Lenovo Tablet S6000L

Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.

Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck

[Completed] Alcatel 5020 Flashing Problems

Hello,
i tried flashing my Alcatel 5020x with SP Flash tool today. I tried once and everything went well except that it got stuck at the boot logo.
i then decided to format all except bootloader. The phone does not at all respond to anything after that. When plugged into computer or power it just has its led indicator on.
The PC does not detect it with or without battery. Not even any plug in/out sound on the PC.
I've tried different ports, uninstall drivers etc, nothing works. :crying:
Please Help!
If someone knows Test Point method for this device then please share!

Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Thread closed / Duplicate

[Completed] Sophone i6 plus soft bricked please help

Guys
I just bought a sophone i6 plus with an mtk6582
I tried flashing gapss on it via zit flasher and now it is stuck in bootloop
I tried factory resetting it from the recovery....still stuck
Now the problem is that i cant get it to work with sp flash tool.....maybe it is bcoz the debugging is disabled bcoz i just factory reset the phone
Every time i connect the turned off phone to sp flash tool....instead of flashing ....the phone just starts to charge and nothing happens
I tried all maximum usb drivers......i dont wnow how to open bootloader......its not working with adb either.......so basically its just stuck in bootloop only.
Pl help
Thabks

Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find any information about your problem on your device. However, I would recommend posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios

[Completed] How to Unbrick MT6592M Chinese Phone

Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.

Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios

Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...

[Completed] Need help flashing ROM on phone with malware without USB connection

Hello,
I got a dreadful malware on my phone that takes it over almost completely, a hand cursor appears on the top right of the screen and it downloads apps left and right even if I disable download from unknown sources.
I have done a factory reset and that thing is still there, I can't seem to flash a ROM with all the tools I found online, flashify does not see the zip file, ROM manager does not work either. I have tried to follow various tutorials but always arrive at a standstill, the recovery apps just don't seem to see anything but folders.
My phone is a Jiayu F2, on the official site they recommend to flash with SP flashtools but I can't use that since my USB port is broken.
Are there any other options? I have superuser enabled, can do very little with my phone except in safe mode. Airplane mode tames the malware a little but not completely.
Malwarebytes does not see anything wrong with my phone anymore ( there used to be a riskware), yet it's still completely unusable.
Can someone help me please? I'm getting desperate and can't buy a new phone before 2 weeks
Thanks

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist