Guys
I just bought a sophone i6 plus with an mtk6582
I tried flashing gapss on it via zit flasher and now it is stuck in bootloop
I tried factory resetting it from the recovery....still stuck
Now the problem is that i cant get it to work with sp flash tool.....maybe it is bcoz the debugging is disabled bcoz i just factory reset the phone
Every time i connect the turned off phone to sp flash tool....instead of flashing ....the phone just starts to charge and nothing happens
I tried all maximum usb drivers......i dont wnow how to open bootloader......its not working with adb either.......so basically its just stuck in bootloop only.
Pl help
Thabks
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find any information about your problem on your device. However, I would recommend posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios
Related
hello, i am having a problem with my tablet name : penta ws1001q
the problem is that it stuck at the manufacturer i can only access the recovery mode.
I made a factory data reset and format cache but this has not solved my problem.
So i have have downloaded its driver on the manufacturer website and i have download drivers(it include sp flash tool, an the tabs image) for my tablets the problem is that i don't know how to use them.
I am asking you if you can give me a clear explanation on how to install this driver to my tablet and also how to use sp flash tool and get my tab in the download mode. I have already try using adb command but it did not work the tab just boot and stuck at manufacturer logo.
Please help me.
Hi,
I can't find anything relevant on XDA related to your device so please ask for more help here :
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Hello! A week ago i hard-bricked my android device (alcatel ot x'pop 5035x). I am pretty sure that is a hard brick because it isn't turning on, it doesn't charge and nothing happens if I connect it to my PC throush USB. All this because I flashed a stock rom downloaded from 4pda. I used SP FlashTool. After I choose the scatter file; some of that options were already ticked (preloader, uboot, bootimg, recovery) and I ticked 2 more: android and nand. Since then my phone didn't boot.
Sorry for my bad english, I hope you understand.
Hi
Thanks for writing to us at XDA Assist.
I didn't find anything to fix your issue. Try asking in the Android Q&A forum where you may get better help:
Android Q&A, Help & Troubleshooting
Good luck!
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck
Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.
Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...
I need help regarding my Zen ultraphone 502. I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with ultraphone 502 official stocked image jelly bean with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Hint is blankl.
The phone is dead. I cannot start the phone but the phone is detected in sp flash tool and windows os. I think it is bricked.
Can do a full format. Can also do memory check... But am not able to flash a single file.. Now my phone is dead it won't boot up..
So any help ASAP would be appreciated.
Plzz plzzz i need ur help..
Thanks!!
There is no problem with the rom ... Am using stock rom and had flashed it so many times before...
Any way to solve this problem..
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist