Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck
Related
Hello! A week ago i hard-bricked my android device (alcatel ot x'pop 5035x). I am pretty sure that is a hard brick because it isn't turning on, it doesn't charge and nothing happens if I connect it to my PC throush USB. All this because I flashed a stock rom downloaded from 4pda. I used SP FlashTool. After I choose the scatter file; some of that options were already ticked (preloader, uboot, bootimg, recovery) and I ticked 2 more: android and nand. Since then my phone didn't boot.
Sorry for my bad english, I hope you understand.
Hi
Thanks for writing to us at XDA Assist.
I didn't find anything to fix your issue. Try asking in the Android Q&A forum where you may get better help:
Android Q&A, Help & Troubleshooting
Good luck!
Guys
I just bought a sophone i6 plus with an mtk6582
I tried flashing gapss on it via zit flasher and now it is stuck in bootloop
I tried factory resetting it from the recovery....still stuck
Now the problem is that i cant get it to work with sp flash tool.....maybe it is bcoz the debugging is disabled bcoz i just factory reset the phone
Every time i connect the turned off phone to sp flash tool....instead of flashing ....the phone just starts to charge and nothing happens
I tried all maximum usb drivers......i dont wnow how to open bootloader......its not working with adb either.......so basically its just stuck in bootloop only.
Pl help
Thabks
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find any information about your problem on your device. However, I would recommend posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios
Hey, guys good afternoon. I have a Cubot Note S which I manage quite stupidly, to brick. The phone was rooted with KingRoot and I accidentally press to update to the latest software version from the Update Center of the phone and before it managed to complete, it showed an "ERROR" message. After that, I stuck into a boot loop. I've been searching the internet for a stock firmware of the phone in a .zip file because the Cubot has something like a stock Recovery mode, which I can boot to, to factory reset my phone, to boot into bootloader or apply an update through an sdcard etc. So far I only found a rom on needrom and it is in .rar and has many other irrelevant files in it. It has instructions below how to perform a clean flash of the ROM, but something goes wrong at the process. Either the SP-DMT (Flash Tool) doesn't work properly or my computer doesn't recognize my phone and I can't find the proper drivers for it. Has anyone ever been in this situation before with a chinese phone? Please help out with this because the cell phone belongs to a dear friend of mine and I can't afford to buy a new one these days. Thank you in advance.
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
Kind regards
Trafalgar Square
XDA Assist
Hello,
I got a dreadful malware on my phone that takes it over almost completely, a hand cursor appears on the top right of the screen and it downloads apps left and right even if I disable download from unknown sources.
I have done a factory reset and that thing is still there, I can't seem to flash a ROM with all the tools I found online, flashify does not see the zip file, ROM manager does not work either. I have tried to follow various tutorials but always arrive at a standstill, the recovery apps just don't seem to see anything but folders.
My phone is a Jiayu F2, on the official site they recommend to flash with SP flashtools but I can't use that since my USB port is broken.
Are there any other options? I have superuser enabled, can do very little with my phone except in safe mode. Airplane mode tames the malware a little but not completely.
Malwarebytes does not see anything wrong with my phone anymore ( there used to be a riskware), yet it's still completely unusable.
Can someone help me please? I'm getting desperate and can't buy a new phone before 2 weeks
Thanks
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist