Database Info

[Completed] BROM ERROR 5007 brick phone - pleas help!

Hello masters developer,
i have a smartphone Goophone S5 (duplicate Galaxy S5) . I had big problems with fixing the GPS satellite, and so we wanted to play ROMs . At first I thought, but needed to do CWM . According to the instructions I downloaded the driver , Smartphone MTK Flash Tool and Droid Tools. Everything installed and Flash Tools created Readbeck ROM_0 . I then created automatically CWM and other relevant instruments . When recording CWM but it went wrong and my phone will not turn on .
In the overall withdrawal will play , but I still can not turn on the phone . When selecting a site download, upgrade firemwaru give me an error message ERROR BROM see image. Phone has MTK MT6592.
I welcome any advice

Hello,
I'm not finding a specific forum for your device/issue. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.

[Completed] Lenovo Tablet S6000L

Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.

Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck

[Completed] How to Unbrick MT6592M Chinese Phone

Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.

Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios

Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...

[Completed] Alcatel POP C7 - Help

Hi guys, i tryed to upgrade my Pop c7 to Android 4.4 kitkat , i get SP Flash tool, Driver for my system and the ROM.
Ok well, i connect the phone (off) with usb cable and the sound of plug in is good, but ,after 2 sec the device in unplugged and i dont know why.
I tryed to delete all driver and try again, when i plug my phone the first time windows try to install MT65xx Preloader , with no success (because after 2 sec the device is like unplugged) i tryed to install every kind of driver, and i have always the same result.
I tryed to click quickly when the MT65xx Preloader Driver get in, but i've no option for update driver or similar.
Pls help me,thank you!

Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find what you wanted on XDA. Please create a XDA account and post here:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios

[Completed] somebody help me.... encryption occured and now phone won't flash anymore..

I need help regarding my Zen ultraphone 502. I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with ultraphone 502 official stocked image jelly bean with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Hint is blankl.
The phone is dead. I cannot start the phone but the phone is detected in sp flash tool and windows os. I think it is bricked.
Can do a full format. Can also do memory check... But am not able to flash a single file.. Now my phone is dead it won't boot up..
So any help ASAP would be appreciated.
Plzz plzzz i need ur help..
Thanks!!
There is no problem with the rom ... Am using stock rom and had flashed it so many times before...
Any way to solve this problem..

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist