Database Info

[Q] [helpwithroot] Xolo Play 6X-1000

Need some help with rooting Xolo Play 6X-1000.
I tried the SP-Flash Tools method (as instructed in one of the YT videos. I found the video link from one of the forums on this site.)
ADB Drivers Installation show a wrong device. (some HTC device)
When I try opening MKDroidTools, it shows:
--->>> Connect to device <<<---
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
What should I do?
Well.. I don't think this information will be of any help, but I bought the phone around a month ago.
Help appreciated.
I apologize if I accidentally broke any forum rules by posting this thread.

[Completed] Zopo ZP999 Bricked after Firmware Update, Flashtool Stuck Downloading System

hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?

Zopodroid said:
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Zopo ZP999 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good Luck!

[solved]
hi,
found solution
I uninstall/reinstall vcom driver and changed usb cable...flash OK....phone alive again
can be closed

[Completed] Lenovo Tablet S6000L

Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.

Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck

[Completed] How to Unbrick MT6592M Chinese Phone

Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.

Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios

Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...

[Completed] Prestigio Multipad 4 Quantum 7.85 3G stuck at wellcome scrn, recovery doesnt work....

Hi Guys,
Tried looking for a similiar issue, didnt find any on XDA, there are some on the internet but non with a solution.
Without any custom roms or recoveries, my tablet just got stuck at the wellcome screen. I cant get into recovery. I can get the preloader detected and i also can capture the tablet in SP Flash tools, but any step attempted ends with an error.
I found a firmware file for this tablet at a russian page https://yadi.sk/d/_CsVJm3YejLq7 , but it doesnt work either. So no "Download" no "Format" and no "Upgrade firmware" option works. I can also provide the error codes if needed.
Any idea how to fix this?
Thanks and regards
G.

Hello,
Welcome to XDA.
There is no forum for your device. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.