Need some help with rooting Xolo Play 6X-1000.
I tried the SP-Flash Tools method (as instructed in one of the YT videos. I found the video link from one of the forums on this site.)
ADB Drivers Installation show a wrong device. (some HTC device)
When I try opening MKDroidTools, it shows:
--->>> Connect to device <<<---
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
What should I do?
Well.. I don't think this information will be of any help, but I bought the phone around a month ago.
Help appreciated.
I apologize if I accidentally broke any forum rules by posting this thread.
Related
So i bricked my Gpad 8.3 during a bad flash. I have attempted to access it with every tool i could find, and the only things that can access it are ones that use qualcomm drivers. It is in something called bulk mode (9008 specifically) which requires the qualcomm qhsusb driver. Two tools i have tried can interact with the device one found in this thread: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830. The tool in the OP has my chipset and can run tests on my device with the 3.99 version, but fails at the SDRAM test. I have also tried the restore boot image with this program to no avail.
The other is QPST a manufacturer program that i do not know how to use. I know QPST can place the device into download mode and has the ability to flash images, but i don't know anything else about it. On google there are guides for other phones to fix them being bricked so i am hopeful there is something i can do with this program.
Can anybody help me out with this? I'm stuck
Hi
Thanks for writing to us at XDA Assist. I can see you've also asked the same question here:
Gpad bricked, what can I do?
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. You're receiving help there so I'll close this thread and let you continue there.
Thread closed, thanks.
Hello masters developer,
i have a smartphone Goophone S5 (duplicate Galaxy S5) . I had big problems with fixing the GPS satellite, and so we wanted to play ROMs . At first I thought, but needed to do CWM . According to the instructions I downloaded the driver , Smartphone MTK Flash Tool and Droid Tools. Everything installed and Flash Tools created Readbeck ROM_0 . I then created automatically CWM and other relevant instruments . When recording CWM but it went wrong and my phone will not turn on .
In the overall withdrawal will play , but I still can not turn on the phone . When selecting a site download, upgrade firemwaru give me an error message ERROR BROM see image. Phone has MTK MT6592.
I welcome any advice
Hello,
I'm not finding a specific forum for your device/issue. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.
Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...
I recently bricked my RCA tablet while modifying the boot file in the device's system folder. It was stuck in a bootloop so I followed the directions in another forum to use SP Flash tool and flash it to reinstall the stock rom. While following those instructions to the T, it seems that my device will now no longer boot, won't charge, and is not recognized by my computer (all the symptoms of a hard-brick as I am told). I followed a brief fix explained by a self-help forum within hovatek to use the SP Flash tool to only flash the preloader file just to try and get the device to boot again, but not even that worked. I would like to know what else there is I can do to fix it or if there's no other option but to send it back to the factory. I am using a RCT6773W22 Tablet w/ V38-V1.8.0
Hello,
Welcome to XDA.
Try following what you find in the thread linked below, maybe it will help.
http://forum.xda-developers.com/general/general/stock-rom-twrp-root-oc-uv-rca-7-voyager-t3087075
If that doesn't help, try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Thank you, the first link you gave me was actually the first thread that I followed to fix my tablet when it was still soft-bricked. Which then led to it becoming hard-bricked. I shall try and repost in the second link you gave me when I get the chance.
Hi Guys,
I tried to flash a new ROM into my Nubia Z7 mobile, as specified the blog "unbrick-qualcomm-mobiles" in web site "droidsavvy.com" (was not able post the url).
I was able to follow the steps until deletion of 29 partitions using minitool as specified in the blog and suddenly PC is not detecting the device, because of which I am not able flash the new ROM and also, tried different android and qualcomm drivers installation by forcing my windows 10 to switch of signature validation of drivers, but nothing is detecting my device now.
Can any one please let me know a way I can fix this issue?
Thanks in advance.
Regards,
Jagadeesh
Hello and welcome to Assist
Please register an account and post in your device help section to get help from members who own the Z7
https://forum.xda-developers.com/zte-z7/help
Make sure you provide as much detail as possible
Good luck