So i bricked my Gpad 8.3 during a bad flash. I have attempted to access it with every tool i could find, and the only things that can access it are ones that use qualcomm drivers. It is in something called bulk mode (9008 specifically) which requires the qualcomm qhsusb driver. Two tools i have tried can interact with the device one found in this thread: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830. The tool in the OP has my chipset and can run tests on my device with the 3.99 version, but fails at the SDRAM test. I have also tried the restore boot image with this program to no avail.
The other is QPST a manufacturer program that i do not know how to use. I know QPST can place the device into download mode and has the ability to flash images, but i don't know anything else about it. On google there are guides for other phones to fix them being bricked so i am hopeful there is something i can do with this program.
Can anybody help me out with this? I'm stuck
Hi
Thanks for writing to us at XDA Assist. I can see you've also asked the same question here:
Gpad bricked, what can I do?
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. You're receiving help there so I'll close this thread and let you continue there.
Thread closed, thanks.
Related
I recently agreed to help a friend on repairing his mobile and I succeeded. but I tried different options and mistakenly deleted the system files. so now all that displays is the boot logo and goes directly into recovery mode. Can anybody help me to recover it? better, if someone could provide me with a backup from the same model so I can simply apply it from SD card.
P.S. it was rooted before going into hard brick stage!
Currently XDA does not have a forum specific for your device, however you may find some help here: http://forum.xda-developers.com/android/help in the Android Q&A and Troubleshooting Forum. A brief search of your device has yielded several threads in that forum that may help you.
Good luck,
-- Gandalf
Hello friends!,
I have a huge problem with my THL W200 phone. You see stupid me changed the build.prop file and then my phone got bricked and I think still is, because it wont pass the THL logo. I don't have a recovery installed, so it makes this situation harder, I have tried factory mode (volume down + power) and selected emmc, but still stops at the THL logo.
I have tried with SP flash tool, but nobody gives decent instructions... and the program doesn't wish to do anything at all.
I would very appreciate it if somebody can help me fix my phone.
Bump. Please help me! Phone costed me a lot.
Hi Dujo13309,
Unfortunately there's no dedicated forum for your model. Since I'm not familiar with MTK devices I suggest you to ask your question in the following thread: http://forum.xda-developers.com/showthread.php?t=2259645
Thank you for using XDA Assist.
Thread closed.
Hey there,
i followed these instructions (http://forum.xda-developers.com/showthread.php?t=2263455&page=6) to root my phone - but that's not so important.
Unfortunately after using SP Flash Tool (successfully with green ring) my phone won't turn on again. It is still possible to flash the phone, but as mentioned...no reboot.
Does anyone please have an idea how to fix this problem?
Cheers,
Hiasl
Hi,
it looks like you already found a thread you can ask in. Just register on the site and ask your question there, there will be enough forum members around to help you with your issue.
Closing the thread as you already found your way.
I recently bricked my RCA tablet while modifying the boot file in the device's system folder. It was stuck in a bootloop so I followed the directions in another forum to use SP Flash tool and flash it to reinstall the stock rom. While following those instructions to the T, it seems that my device will now no longer boot, won't charge, and is not recognized by my computer (all the symptoms of a hard-brick as I am told). I followed a brief fix explained by a self-help forum within hovatek to use the SP Flash tool to only flash the preloader file just to try and get the device to boot again, but not even that worked. I would like to know what else there is I can do to fix it or if there's no other option but to send it back to the factory. I am using a RCT6773W22 Tablet w/ V38-V1.8.0
Hello,
Welcome to XDA.
Try following what you find in the thread linked below, maybe it will help.
http://forum.xda-developers.com/general/general/stock-rom-twrp-root-oc-uv-rca-7-voyager-t3087075
If that doesn't help, try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Thank you, the first link you gave me was actually the first thread that I followed to fix my tablet when it was still soft-bricked. Which then led to it becoming hard-bricked. I shall try and repost in the second link you gave me when I get the chance.
Hi Guys,
I tried to flash a new ROM into my Nubia Z7 mobile, as specified the blog "unbrick-qualcomm-mobiles" in web site "droidsavvy.com" (was not able post the url).
I was able to follow the steps until deletion of 29 partitions using minitool as specified in the blog and suddenly PC is not detecting the device, because of which I am not able flash the new ROM and also, tried different android and qualcomm drivers installation by forcing my windows 10 to switch of signature validation of drivers, but nothing is detecting my device now.
Can any one please let me know a way I can fix this issue?
Thanks in advance.
Regards,
Jagadeesh
Hello and welcome to Assist
Please register an account and post in your device help section to get help from members who own the Z7
https://forum.xda-developers.com/zte-z7/help
Make sure you provide as much detail as possible
Good luck