Hello friends!,
I have a huge problem with my THL W200 phone. You see stupid me changed the build.prop file and then my phone got bricked and I think still is, because it wont pass the THL logo. I don't have a recovery installed, so it makes this situation harder, I have tried factory mode (volume down + power) and selected emmc, but still stops at the THL logo.
I have tried with SP flash tool, but nobody gives decent instructions... and the program doesn't wish to do anything at all.
I would very appreciate it if somebody can help me fix my phone.
Bump. Please help me! Phone costed me a lot.
Hi Dujo13309,
Unfortunately there's no dedicated forum for your model. Since I'm not familiar with MTK devices I suggest you to ask your question in the following thread: http://forum.xda-developers.com/showthread.php?t=2259645
Thank you for using XDA Assist.
Thread closed.
Related
Hello friends I'm in big trouble because I did flash a rom wrong for the oppo R8007 or R1S. I have this phone from China but I'm Italian and I can not send him to assistance. I can not go into recovery or fastboot mode. The phone has a black screen and no signs of life. The only thing that happens is that by connecting it to the Pc appears qhsusb_bulk. What can I do? "unbrik"exists a tool?It is a MSM8226 qualcomm. I have only the stock rom, is there a way to install it? There are tool for lg, moto g and for opo one but nothing for my phone. Can somebody help me?
Thank you.
As there is no specific forum for your device you may want to ask here general/help
Good luck
I cant boot in recovery mode when i push the combination it boots then restart and the normal boot nothing happens it always go in normal boot can you help me?
Device: Cloudfone 700q
Root: yes
Hi
Thanks for writing to us at XDA Assist. Unfortunately I haven't been able to find a single piece of information about your device here on XDA. This is pretty common for such unknown and low-popularity devices. So unfortunately we're not going to be much help to you in this instance, good luck with your phone!
Thread closed.
Hey there,
i followed these instructions (http://forum.xda-developers.com/showthread.php?t=2263455&page=6) to root my phone - but that's not so important.
Unfortunately after using SP Flash Tool (successfully with green ring) my phone won't turn on again. It is still possible to flash the phone, but as mentioned...no reboot.
Does anyone please have an idea how to fix this problem?
Cheers,
Hiasl
Hi,
it looks like you already found a thread you can ask in. Just register on the site and ask your question there, there will be enough forum members around to help you with your issue.
Closing the thread as you already found your way.
Hello guys, can i request for a firmware of the tablet Hipstreet Titan 2? I googled for it by hours and talked to technicians, customer supports, but no one solved it. I was stucked at the boot screen of the device, nothing to do. tried hard reset. I dont know if it was still rooted after the reset. ADB actions works, but not adb root. Lets not get far from the topic, is there any firmware for this? please? or how to fix boot loop after editing build.prop file?
up
SourScream17 said:
Hello guys, can i request for a firmware of the tablet Hipstreet Titan 2? I googled for it by hours and talked to technicians, customer supports, but no one solved it. I was stucked at the boot screen of the device, nothing to do. tried hard reset. I dont know if it was still rooted after the reset. ADB actions works, but not adb root. Lets not get far from the topic, is there any firmware for this? please? or how to fix boot loop after editing build.prop file?
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck