Hey there,
i followed these instructions (http://forum.xda-developers.com/showthread.php?t=2263455&page=6) to root my phone - but that's not so important.
Unfortunately after using SP Flash Tool (successfully with green ring) my phone won't turn on again. It is still possible to flash the phone, but as mentioned...no reboot.
Does anyone please have an idea how to fix this problem?
Cheers,
Hiasl
Hi,
it looks like you already found a thread you can ask in. Just register on the site and ask your question there, there will be enough forum members around to help you with your issue.
Closing the thread as you already found your way.
Related
HI EVERY BODY
this is quite challenging , given the various tread on unbricking
this phone MMX Canvas 4 A210, in process of imei solution ( which could not be installed via engineering mode) and in process of changing rom, flashed mistakenly by formating bootloader in sp tool ( phone no longer recognized by PC or go into recovery, on pressing power ...no action))
checked all treads on xda but none say about this situation???, is totally baked ( hard bricked or what?? )
ANY EXPERTS SOLUTION or people in the same situation, if then how did you get out of this????
i have costum rom downloaded, sp tool , scatter txt. ......ready?
Hi,
Edit:
I see you've found the right place to ask for help already.
Good luck!
how to??
hi guys
i read many threads on xda beyond this phone MMX A210 canvas 4 / blue one, (correct me if i am wrong)... this is the bootloader problem, so i need to download and istall the bootloader fist
question 1) is the bootloader in in rom itself??? because i have downloaded mine
2) how do i go about it ( install boot loader)
3) there is thread using resistor of 100k method is it working??
awaiting your reply
Please use your thread in General Q&A that you've opened.
Xda Assist is for helping members navigate the site, not for support.
Thanks!
Hello there,
I saw lollipop update announced. So checked system update , but it wasnt there. Then i started to do manual upgrade to Lollipop to my YUREKA phone. But mistakenly i haven't followed the steps. Without wipe i started install installing "cm-12.0-YNG1TAS0W0-tomato-signed.zip" from install option (from screen which comes after VolumeUp+VolumeDown+Power key). Instead of apply update option i did it install. And after what I see is just a screen blinking name "cyanogen". Thats it. Not booting not installing not even opening the screen which comes after VolumeUp+VolumeDown+Power key. My phone almost dead. PLease help. ASAP. My only phone is dead now. Help me to restore my phone back to what is was? :crying::crying:
Hi, thank you for using XDA Assist. See this thread which may help answer your question, http://forum.xda-developers.com/yureka/help/troubleshooting-problems-faced-cm12-os-t3085925. Also see this for further information,http://forum.xda-developers.com/yureka Please post any further question you have in those forums.
Good luck and welcome to XDA.
Thread closed.
Hi everyone,
My Huawei Ascend G700 got stuck in a bootloop when I tried flashing twrp recovery. Now it restarts every 3-4 seconds which is too short to flash anything. The flash tool does recognize the phone, but only for a few seconds. Is there a way to keep it from rebooting except recovery, because flashing the recovery had failed.
Thanks for your help!
Hi, again. I answered this here, http://forum.xda-developers.com/general/xda-assist/bootloop-huawei-ascend-g700-u10-t3087182 Unfortunately there is very little information on XDA about your device. This may also help, http://forum.xda-developers.com/showthread.php?t=2511318 This is why I tell people if they don't know how to flash the stock firmware on their device they should not root or flash anything to it.
Hi, thanks for your answer and sorry for making two threads (the other one was kinda old and I thought it had been forgotten).
I had already checked that thread but it didn't help. The solution is an old version of the Huawei program that I can't find.
So this doesn't happen with other devices? Does the device keep on being recognised by the computer of it's in a bootloop?
If, after thoroughly reading through how-to's and tutorials, I thought I knew how to flash a ROM.
Thread closed
Hello friends!,
I have a huge problem with my THL W200 phone. You see stupid me changed the build.prop file and then my phone got bricked and I think still is, because it wont pass the THL logo. I don't have a recovery installed, so it makes this situation harder, I have tried factory mode (volume down + power) and selected emmc, but still stops at the THL logo.
I have tried with SP flash tool, but nobody gives decent instructions... and the program doesn't wish to do anything at all.
I would very appreciate it if somebody can help me fix my phone.
Bump. Please help me! Phone costed me a lot.
Hi Dujo13309,
Unfortunately there's no dedicated forum for your model. Since I'm not familiar with MTK devices I suggest you to ask your question in the following thread: http://forum.xda-developers.com/showthread.php?t=2259645
Thank you for using XDA Assist.
Thread closed.
I recently bricked my RCA tablet while modifying the boot file in the device's system folder. It was stuck in a bootloop so I followed the directions in another forum to use SP Flash tool and flash it to reinstall the stock rom. While following those instructions to the T, it seems that my device will now no longer boot, won't charge, and is not recognized by my computer (all the symptoms of a hard-brick as I am told). I followed a brief fix explained by a self-help forum within hovatek to use the SP Flash tool to only flash the preloader file just to try and get the device to boot again, but not even that worked. I would like to know what else there is I can do to fix it or if there's no other option but to send it back to the factory. I am using a RCT6773W22 Tablet w/ V38-V1.8.0
Hello,
Welcome to XDA.
Try following what you find in the thread linked below, maybe it will help.
http://forum.xda-developers.com/general/general/stock-rom-twrp-root-oc-uv-rca-7-voyager-t3087075
If that doesn't help, try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Thank you, the first link you gave me was actually the first thread that I followed to fix my tablet when it was still soft-bricked. Which then led to it becoming hard-bricked. I shall try and repost in the second link you gave me when I get the chance.