Hi Guys,
I tried to flash a new ROM into my Nubia Z7 mobile, as specified the blog "unbrick-qualcomm-mobiles" in web site "droidsavvy.com" (was not able post the url).
I was able to follow the steps until deletion of 29 partitions using minitool as specified in the blog and suddenly PC is not detecting the device, because of which I am not able flash the new ROM and also, tried different android and qualcomm drivers installation by forcing my windows 10 to switch of signature validation of drivers, but nothing is detecting my device now.
Can any one please let me know a way I can fix this issue?
Thanks in advance.
Regards,
Jagadeesh
Hello and welcome to Assist
Please register an account and post in your device help section to get help from members who own the Z7
https://forum.xda-developers.com/zte-z7/help
Make sure you provide as much detail as possible
Good luck
Related
sorry if i posted this the wrong place but nevertheless here is what i need help with.
i was looking for a stable 4.4.2 rom to flash on my at&t note 2 and i found this http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
so i followed the instructions and flashed with odin and flashed the new bootloader since i was running lower than mj5
after flashing everything went well the rom was great until i wanted to take some photos from my laptop and send them to the phone.
the laptop recognizes a usb device but no prompt for folders or anything is being given, ive tried multiple usb cables and even multiple pcs to no avail.
so i tried reverting back to my old firmware 4.1.2 and the problem is still there
after digging around the computer in the device manager, the phone is being listed as SAMSUNG_ANDROID and is unknown followed by an error when i click properties which says:
This device is not configured correctly. (Code 1)
To find a driver for this device, click Update Driver.
so i tried updating the driver which failed and said an error occured data invalid
i really need some help on this because my phone isnt being picked up by odin or download mode
please help asap
Hi,
Please note the following sticky from the top of this section,
> General discussion > XDA Assist > The Purpose of XDA Assist [Please Read]
XDA Assist is here to help navigate the site, not for support. You've been shown your device section by Assist before, and have posted in it. That is where to post questions or issues about your device.
Thank you for understanding, thread closed.
So i bricked my Gpad 8.3 during a bad flash. I have attempted to access it with every tool i could find, and the only things that can access it are ones that use qualcomm drivers. It is in something called bulk mode (9008 specifically) which requires the qualcomm qhsusb driver. Two tools i have tried can interact with the device one found in this thread: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830. The tool in the OP has my chipset and can run tests on my device with the 3.99 version, but fails at the SDRAM test. I have also tried the restore boot image with this program to no avail.
The other is QPST a manufacturer program that i do not know how to use. I know QPST can place the device into download mode and has the ability to flash images, but i don't know anything else about it. On google there are guides for other phones to fix them being bricked so i am hopeful there is something i can do with this program.
Can anybody help me out with this? I'm stuck
Hi
Thanks for writing to us at XDA Assist. I can see you've also asked the same question here:
Gpad bricked, what can I do?
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. You're receiving help there so I'll close this thread and let you continue there.
Thread closed, thanks.
Hello masters developer,
i have a smartphone Goophone S5 (duplicate Galaxy S5) . I had big problems with fixing the GPS satellite, and so we wanted to play ROMs . At first I thought, but needed to do CWM . According to the instructions I downloaded the driver , Smartphone MTK Flash Tool and Droid Tools. Everything installed and Flash Tools created Readbeck ROM_0 . I then created automatically CWM and other relevant instruments . When recording CWM but it went wrong and my phone will not turn on .
In the overall withdrawal will play , but I still can not turn on the phone . When selecting a site download, upgrade firemwaru give me an error message ERROR BROM see image. Phone has MTK MT6592.
I welcome any advice
Hello,
I'm not finding a specific forum for your device/issue. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.
Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist