hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Zopodroid said:
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Zopo ZP999 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good Luck!
[solved]
hi,
found solution
I uninstall/reinstall vcom driver and changed usb cable...flash OK....phone alive again
can be closed
Related
My phone was ok. I installed cwm recovery by mtk dorid tool. But , I wanted to install TWRP recovery by a pc software- during installation a warning message appeared and I clicked ok (something formatted – I did not remember). Then I lost my mobile network signal, null imei and null baseband. Then I install N9500_MTK6589_Miui_Revolution_4.5.23_Cwm via CWM recovery (2 times, but system closed automatically. But, third time after installation phone totally bricked ). Basically phone starts with startup sound, but with crushing screen. I was able to connect mtk dorid tool and it says Model: N9500- null baseband-null imei, then I tried to Install CWM recovery. Then phone totally bricked without starting. I tried everything from google to solve. Then I was able to firmware upgrade – stock rom (Only one time). Now, stock rom is not downloading. I used all sp flash tools. All the times one error appears –Brom Error: S_FT_Enable_DARM_Fail (4032).
Please anyone help me. (My Pc Detect My Phone as preloader usb vcom port, I am using windows 8.1 64 bit, no issue with driver software and sp flash tool. Is it any problem with my Motherboard.)
Hi there,
I'm sorry but I can't find anything related to your question/device because we don't have any forum/thread with development for this device.
Please post that in the forum bellow for more answers from the experts. Register an account on XDA for that.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hello masters developer,
i have a smartphone Goophone S5 (duplicate Galaxy S5) . I had big problems with fixing the GPS satellite, and so we wanted to play ROMs . At first I thought, but needed to do CWM . According to the instructions I downloaded the driver , Smartphone MTK Flash Tool and Droid Tools. Everything installed and Flash Tools created Readbeck ROM_0 . I then created automatically CWM and other relevant instruments . When recording CWM but it went wrong and my phone will not turn on .
In the overall withdrawal will play , but I still can not turn on the phone . When selecting a site download, upgrade firemwaru give me an error message ERROR BROM see image. Phone has MTK MT6592.
I welcome any advice
Hello,
I'm not finding a specific forum for your device/issue. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck
Hi guys, i tryed to upgrade my Pop c7 to Android 4.4 kitkat , i get SP Flash tool, Driver for my system and the ROM.
Ok well, i connect the phone (off) with usb cable and the sound of plug in is good, but ,after 2 sec the device in unplugged and i dont know why.
I tryed to delete all driver and try again, when i plug my phone the first time windows try to install MT65xx Preloader , with no success (because after 2 sec the device is like unplugged) i tryed to install every kind of driver, and i have always the same result.
I tryed to click quickly when the MT65xx Preloader Driver get in, but i've no option for update driver or similar.
Pls help me,thank you!
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find what you wanted on XDA. Please create a XDA account and post here:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist