Hi guys, i tryed to upgrade my Pop c7 to Android 4.4 kitkat , i get SP Flash tool, Driver for my system and the ROM.
Ok well, i connect the phone (off) with usb cable and the sound of plug in is good, but ,after 2 sec the device in unplugged and i dont know why.
I tryed to delete all driver and try again, when i plug my phone the first time windows try to install MT65xx Preloader , with no success (because after 2 sec the device is like unplugged) i tryed to install every kind of driver, and i have always the same result.
I tryed to click quickly when the MT65xx Preloader Driver get in, but i've no option for update driver or similar.
Pls help me,thank you!
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find what you wanted on XDA. Please create a XDA account and post here:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Related
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Zopodroid said:
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Zopo ZP999 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good Luck!
[solved]
hi,
found solution
I uninstall/reinstall vcom driver and changed usb cable...flash OK....phone alive again
can be closed
I have a karbonn a1+ champ with mt6571 ... it was working well .. but i decided to flash cusstom rom but flashing failed ... so i was going to flash the stock rom ... but somehow i formatted the whole phone using sp flash tools with bootloader ...
now pc is detecting the phone as it was getting detected but it is not coming in download mode... as it used to come by pressing the volume down key ... and windows is auto detecting it as mtk vcom usb preloader port .. and ssp flash tools is giving error 4032... please help ...
CAN ANYONE HELP???
HI,
Thanks for writing to us at XDA Assist.
There is no forum for your device at this time but you may want to ask your question with all relevant details in the general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Good luck.
BTW do not "bump" a thread more than once per 24 hours. Thank you.
Hello,
I'm new to the forum. I decided to register, because here is the biggest base of android knowledge.
I need your help about my phone Landvo L500s. I tried to install custom rom-cyanogenmod 12 on it and eventually I bricked the phone. I have tried all the ways shown in internet tutorials to unbrick phone with factory rom, but I always get this error-BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032); [EMI] Enable DRAM Failed!
I have already installed USB VCOM drivers and my phone is recognised by device manager(Windows 8.1 x64) so that's not the cause.
Also I can't access recovery mode, as phone doesn't start any more.
If you know any solution, Please help me solve the problem.
Hi,
Thanks for using XDA assist.
I couldn't find a thread that could help you unbrick your device.
Please create a XDA account and post in the following forum:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
Already solved it!
I already solved the problem. I found more stable Stock ROM and flashed it...
ok Hey
i have an LG G3 beat (D722)
So i wanted to install a rom and i just missed all up and destory everything and clicked the worng stuff
so now im turning my phone on and its saying
[670] fastboot_init( )
[770] USB init ept @ 0x1001e000
[790] udc_start
i tryed to click every bottom in my phone and its does nothing
i tryed to power+volum down
and power+volum up
and both
nothing works
and then i tryed to connect it to a computer and its just not connected and the pc cant reconize it and its not saying anything or showing that something is connect to the pc
i tryed to do it in 3 differents computers
and i know that its not like my phone screen is freezing cuz it typing more things on the phone when i connect it to the computer
i also cheaked that the drivers was updated
i will be really thxfull if someone know how to fix it
thx
Mat
Hello and thank you for using XDA Assist,
please create an account and ask in this section:
G3 Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist