Hey guys,
I'd like to have the Idol 3 be startet, when the wall charger is plugged in.
Is it manageable ?
I know that this can be done to Samsung devices - Alcatels as well?
xhardcoreunit said:
Hey guys,
I'd like to have the Idol 3 be startet, when the wall charger is plugged in.
Is it manageable ?
I know that this can be done to Samsung devices - Alcatels as well?
Click to expand...
Click to collapse
Hello !
I dont think thats possible yet in any rom !! but is a good ideia.
Regards
Can someone tell me which file is responsible for displaying the battery icon, when the Alcatel is charging?
xhardcoreunit said:
Can someone tell me which file is responsible for displaying the battery icon, when the Alcatel is charging?
Click to expand...
Click to collapse
You can find the animation in /system/media/chargeranimation.zip
I think for boot on charging, I have to change something in the kernel.
xhardcoreunit said:
I think for boot on charging, I have to change something in the kernel.
Click to expand...
Click to collapse
You have indeed..
sure it can be done, but i think the kernel is loaded after the initial startup.
But i can be mistaken. Maybe the kernel is loaded in power off state, when charger is pluged in, but it cna use different .rc file.
So As i know there were lpm file in older versions of android loacted in systme/bin the lpm file could be edited and then it worked, but as i looked into system/bin i havent found this file so either it has another name, or the startup process changed by OS version/manufacturer.
Related
today i was using my phone normally.. it was working perfect
suddenly the phone hanged up and turned off
i tried to boot it and nothing happened
any suggestions ?!
thank u all
HTC sensation XE
Hboot :1.27
unlocked
kernel: bricked
Rom:ViperS 1.63
hack-zone said:
today i was using my phone normally.. it was working perfect
suddenly the phone hanged up and turned off
i tried to boot it and nothing happened
any suggestions ?!
thank u all
HTC sensation XE
Hboot :1.27
unlocked
kernel: bricked
Rom:ViperS 1.63
Click to expand...
Click to collapse
try to boot into bootloader
then select reboot
see how it goes
rzr86 said:
try to boot into bootloader
then select reboot
see how it goes
Click to expand...
Click to collapse
Can't reach the hboot :/
The phone is not turning on when pressing the power button
and when I plug it in the charge, the charging LED also is not turning on
Is the notification LED blinking? Try charging the battery with a universal charger.
hack-zone said:
Can't reach the hboot :/
The phone is not turning on when pressing the power button
and when I plug it in the charge, the charging LED also is not turning on
Click to expand...
Click to collapse
try charging the device without battery,sim and sdcard for 5-6 hours
then put them back and power on the device
if that fails too then
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
try charging the device without battery,sim and sdcard for 5-6 hours
then put them back and power on the device
if that fails too then
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
buddy, I'd got this problem as well once, it won't work. If the LED is not blinking, according to ganeshp, it means a DEFINITE HARD BRICK.
so, I think THE ONLY way to solve it, is to use J-Tag (Or replace the mainboard, a little screwing off).
hope it gets alright.
ashkan-khatar said:
buddy, I'd got this problem as well once, it won't work. If the LED is not blinking, according to ganeshp, it means a DEFINITE HARD BRICK.
so, I think THE ONLY way to solve it, is to use J-Tag (Or replace the mainboard, a little screwing off).
hope it gets alright.
Click to expand...
Click to collapse
yeah i know mate but for some users the unbricking project helped too
if that fails then the last option is jtag
Thank u all for your help guys
hack-zone said:
Thank u all for your help guys
Click to expand...
Click to collapse
did you fix it with j-tag?
Sensation xe beat Not turing on
rzr86 said:
did you fix it with j-tag?
Click to expand...
Click to collapse
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
Hard brick, if you in US contact me, i do jtag service.
tomy1986.nt said:
Hard brick, if you in US contact me, i do jtag service.
Click to expand...
Click to collapse
I am outside US. can u fix it online?
farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
Sorry, Jtag can not do online.
@farazi482
Look here : http://mobiletechvideos.mybigcommerce.com/htc-sensation-4g-jtag-brick-repair/
These people do international business. I think you just need to pay the shipping though...
Sent from my HTC Sensation
deleted
farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
if you see your phone in device manager as QHSUSB_DLOAD or similar then it is bricked please go here to learn how to recover
Sensation Unbricking Project
And to the people who say if your phones LED no blinking it wont unbrick with Dexters unbrick project your wrong. 95% of the unbricked phones used in the unbricking project have NO blinking LED I did it to my old sensation when bricked going S-ON no LED only picked up in windows as stated above and fixed it on my linux machine
Usb detection problemm
KernelDev101 said:
if you see your phone in device manager as QHSUSB_DLOAD or similar then it is bricked please go here to learn how to recover
Sensation Unbricking Project
And to the people who say if your phones LED no blinking it wont unbrick with Dexters unbrick project your wrong. 95% of the unbricked phones used in the unbricking project have NO blinking LED I did it to my old sensation when bricked going S-ON no LED only picked up in windows as stated above and fixed it on my linux machine
Click to expand...
Click to collapse
Installed Ubuntu 12.04.. then it automatically installed 3 packages (dont know about that).. then extracted 32 bit files to Home
Problem: when i write ./brickdetect.sh in terminal it says "Device can't be detected. check connections.." although its correctly plugged in (without battery, sim, sd card)
any idea how to fix this issue?
farazi482 said:
Installed Ubuntu 12.04.. then it automatically installed 3 packages (dont know about that).. then extracted 32 bit files to Home
Problem: when i write ./brickdetect.sh in terminal it says "Device can't be detected. check connections.." although its correctly plugged in (without battery, sim, sd card)
any idea how to fix this issue?
Click to expand...
Click to collapse
plug your phone into linux and open terminal and type dmesg and send output on here
Hey , i'm new here anyway i need help , i updated my galaxy tab 2 7.0 when it asked for update (i did the update on the tablet not kies) so i woke up the second day and my tablet won't turn on , i connected it to my pc and opened device manager and omap4430 shows and dissapear , any help please?
georgioghazzi said:
Hey , i'm new here anyway i need help , i updated my galaxy tab 2 7.0 when it asked for update (i did the update on the tablet not kies) so i woke up the second day and my tablet won't turn on , i connected it to my pc and opened device manager and omap4430 shows and dissapear , any help please?
Click to expand...
Click to collapse
Have you tried to put it in download mode? or Recovery?
squ89r97 said:
Have you tried to put it in download mode? or Recovery?
Click to expand...
Click to collapse
Yes black screen , i can't turn it on and when i connect it to my pc and try to turn it on , i see in device manager omap4430 showing up and dissapearing ! i tried to manually install the driver and even when i manually installed it it keeps on showing up and dissapearing !
georgioghazzi said:
Yes black screen , i can't turn it on and when i connect it to my pc and try to turn it on , i see in device manager omap4430 showing up and dissapearing ! i tried to manually install the driver and even when i manually installed it it keeps on showing up and dissapearing !
Click to expand...
Click to collapse
i think its completely discharged...try charging it for a while and then try to switch it on!
peRFect! said:
i think its completely discharged...try charging it for a while and then try to switch it on!
Click to expand...
Click to collapse
I Charged it for 24 hrs , still no use ! i guess i bricked it !
georgioghazzi said:
I Charged it for 24 hrs , still no use ! i guess i bricked it !
Click to expand...
Click to collapse
I highly doubt it is fully bricked... You'll need to try a few more things, and learn a few things along the way. Install the Android SDK to get to use ADB. This will require googling and searching here.
Once Installed, plug in the tab, open a command prompt and type: adb devices
This will list the device if it is discovered. I doubt it will see the tab, since device manager is going bonkers...
But if it does, that's great progress.
Also, you'll need to download Samsung Kies (just for the driver) and download Odin, again Google and search here for that. With the tab plugged in, open Odin and see if the tab is connected (yellow box).
See if you can connect to the device with these and let us know.
THE FOLLOWING MAY BE DANGEROUS but I've done it on other devices just fine. Hardware is my specialty:
1) If the charging to the battery is indeed screwed and the battery is drained , which it very well could be, then the tab will not connect to the computer in ADB or Odin.
2) You'll need to remove the back cover and remove the battery. The goal will be to charge the battery enough to flash an oem rom.
3) Rechargeable batteries will directly accept a variety of voltages (input to charge), but will get very hot if you get close to and/or go over the stock output voltage. The output of the oem battery is 3.7 volts, so I wouldn't feed it any more than 3.5 volts raw.
4) Find a charger or some stable source of 2.5 to 3.5 volts. I always keep my chargers for old devices just for fun things like this. Hopefully you have a multimeter, find the + and - of the charger wires.
5) Now the dangerous part: you'll have to figure out how to temporarily wire the charging source to the battery. I usually make a little plug out of random hardware. Whatever works for you.
6) Let it charge for an hour or two, but not overnight or anything long. Put it all back together and see if you can get some life out of it.
Try these things and good luck! Let us know your progress!
after flashing the new walkman app my device got bootloop and wont start
so I reflash the stock rom and the device boots but now it keeps rebooting randonly
i did many wipes and resets
nothing seems to work
please if anyone got a solucion
help please!
:good:
there are multiple moto g versions (xt1032, xt1033, etc.) are you sure you flashed the right version? also did you use the fastboot.exe provided by motorola (mfastboot.exe)? have you tried wiping through the bootloader (fastboot.exe -w)?
blockbusta said:
there are multiple moto g versions (xt1032, xt1033, etc.) are you sure you flashed the right version? also did you use the fastboot.exe provided by motorola (mfastboot.exe)? have you tried wiping through the bootloader (fastboot.exe -w)?
Click to expand...
Click to collapse
Hi blockbusta!
first thanks for your help :good:
i've tried with fastboot not mfastboot (will try today and post the results)
but i've just flashed so many times the same way and all goes well
only after flash the last version of WALKMAN app the device (xt1033) isnt the same
Get same problem for me while charging my get freezz touch issue. :crying: i think its voltage problem.
Al!ster said:
Get same problem for me while charging my get freezz touch issue. :crying: i think its voltage problem.
Click to expand...
Click to collapse
this is just a problem with your charger. i get this problem when charging from usb 3.0 port at my computer and when using my sony charger. my htc charger works like a charm and my motorola charger (which strangly has a voltage of 5.1v instead of 5v) seems to work even a little bit better
blockbusta said:
this is just a problem with your charger. i get this problem when charging from usb 3.0 port at my computer and when using my sony charger. my htc charger works like a charm and my motorola charger (which strangly has a voltage of 5.1v instead of 5v) seems to work even a little bit better
Click to expand...
Click to collapse
I get problem while charging with USB only normal socket charging work sexy
I think I've found the problem
yesterday I wiped and reflashed the stock rom
till now the phone is working perfectly
i think what was causing that issue was some data of my backups
i installed all my apps manualy and device is ok for now without restore any backup
:good:
Hi,
I have a rooted OnePlus 6 android device. I need to make it so it will automatically power on when plugged in to a usb charger. As far as I know all I need to do is to replace the battery charging animation file with a reboot script command. My problem is that I don't know the name of the file that is responsible for battery animation. Each OEM has its own version and naming of that file, so googling didn't help in this case. I need the one that is specific for oneplus 6 device. Please help! Thank you!
OxygenOS battery animation file maybe?
Anyone can help? Maybe it's not OnePlus 6 specific, if somebody tried to customize the battery animation for OnePlus device while the phone is off, I would love to hear about your experience. Is it part of the Kernel or is it a dedicated file that I can just update to get my own animation (or script) running instead.
can somebody provide me files of firehose and patch file for my device
gagan.gowdaaa said:
can somebody provide me files of firehose and patch file for my device
Click to expand...
Click to collapse
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
barryallen3038 said:
could you provide details about how your device is hard bricked? Are you able to boot into download mode?
Click to expand...
Click to collapse
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
gagan.gowdaaa said:
i just updated from ray os to pixel, after booting up and using for some time my device started acting wierdly and i restarted it,from that time my phone is not responding, and cant even go to the download mode, its in a dead state
Click to expand...
Click to collapse
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
barryallen3038 said:
aah, you should have installed stock before moving to pixel...
Are you sure you tried everything? Could you send a video of what happens when you power it on? Also, does it accept charge when you connect it to the charger?
Click to expand...
Click to collapse
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
gagan.gowdaaa said:
i tried to boot it up at every possible way but it wont ,it accepts charging also ,i got to know that when i put my phone with the power bank, when i try to turn on it wont respond,it doesnt even vibrate also , so i tried to put it to edl mode and it worked and it got connected to my pc by qualcom driver
Click to expand...
Click to collapse
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
barryallen3038 said:
That's great! You should be able to force flash the stock firmware through this mode.
This video might help..
Click to expand...
Click to collapse
thank you so much for helping me sir ;0
gagan.gowdaaa said:
thank you so much for helping me sir ;0
Click to expand...
Click to collapse
No problem man. Did you manage to unbrick it?