Hi, I'm new here and I'm new at rooting/Modding android devices.
So first of all I have a Samsung Galaxy Core Prime (SM-G361F) I got it from T-Mobile and its running Android version 5.1.1
I was trying to root it and the only way i was able to root it was to flash a pre-rooted firmware from Here
Now I wanted to install TWRP custom recovery so I went over on this Site and tried every method listed there, especially the Odin install method. When I go into Download mode/Odin Mode it says:
Code:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
At this point I got Odin v3. 10 running and flashed TWRP on my device (in Odin I says PASS!), then it restarted and booted normally into Android. I powered it off and then I held the key combo to enter recovery mode (volume up+home+power) and after it vibrated the Samsung Galaxy Core Prime logo comes on with the powered by Android thing and on the top left corner it says in red text "RECOVERY IS NOT SEANDROID ENFORCING" and nothing happens if I hold the power button for 10 seconds it shuts down and I am able to enter the Download/Odin mode with the proper key combo (volume down+home+power) but can't boot into TWRP or Android any more. What did I do wrong? Any help would be much appreciated.
MrW00dy said:
Hi, I'm new here and I'm new at rooting/Modding android devices.
So first of all I have a Samsung Galaxy Core Prime (SM-G361F) I got it from T-Mobile and its running Android version 5.1.1
I was trying to root it and the only way i was able to root it was to flash a pre-rooted firmware from Here
Now I wanted to install TWRP custom recovery so I went over on this Site and tried every method listed there, especially the Odin install method. When I go into Download mode/Odin Mode it says:
Code:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
At this point I got Odin v3. 10 running and flashed TWRP on my device (in Odin I says PASS!), then it restarted and booted normally into Android. I powered it off and then I held the key combo to enter recovery mode (volume up+home+power) and after it vibrated the Samsung Galaxy Core Prime logo comes on with the powered by Android thing and on the top left corner it says in red text "RECOVERY IS NOT SEANDROID ENFORCING" and nothing happens if I hold the power button for 10 seconds it shuts down and I am able to enter the Download/Odin mode with the proper key combo (volume down+home+power) but can't boot into TWRP or Android any more. What did I do wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
Hi
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in > Android Development and Hacking > Android Q&A, Help & Troubleshooting > Who wants root/custom recovery/custom roms for the core prime? Experts there may be able to help you.
Good luck
Related
Hi there i have a GT-I9200 stock on boot after installing the OTA update 4.4.2 The device boot shows the Smasung Logo and the restart I tried to download the rom and install via Oden everything normal but not when flash boot and recovery it skipped it and flash System ext4 and whin device complete download and restart it shows a message that the device will enter recovery mode but there is no recovery in the device and keep restarting and shows a message when boot into download mode like this
System STATUS : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
XNOX KERNEL LOCK : 0X0
XNOX WARRANTY VOID : 0X1
QUALCOMM SECUREBOOT : ENABLE
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: ENABLE
I have tried to install 4 different 4.4.2 roms it allways the same problem any one have an idea what i should do to install the rom correctly
Hi there,
I'd suggest asking in this help thread: Galaxy Mega Q&A, Help & Troubleshooting - Help thread
Thank you and thread closed
experts
I tried to custom install custom rom on my samsung galaxy S III (ATT). After several unsuccessful attempts, my phone is stuck in soft brick mode (shows Samsung Galaxy after reboot and get stuck there).
I installed custom recover mode apps (CWM, TWRP). I am unable to install custom ROMs using these apps in recover mode. I get NAND write error failed and also "No OS installed error"
When I put the phone in Download mode, the device shows the following.
ODIN MODE
PRODUCT NAME: SGH-I747
Current Binary: Custom
System Status: Custom
Qualcomm Secure boot: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 3
I am guessing Samsung is blocking custom installs. I am unable to recover the phone to samsung custom rom since I don't have recovery code from Samsung Kies. i can't get back to stock rom as there is no OS installed.
Can you suggest some ideas on how to get past the soft brick ?
-regards
OP Junior Member2 posts Thanks: 0
Help me please I rooted my prime with kingroot that went great. I then downloaded and installed the twrp I flashed it using flashify it then re booted upon reboot it would not boot past the Samsung logo with this dialogue in the upper left hand corner
Odin mode
Product name : sm- g360t1
Current binary: Samsung official
System status : official
FAP lock: off
Qaulcomm secureboot: enable (csb)
Rp swrev: s1 t1 h1 r1 a1 p1
Secure download: enable
I can't get it to hard reset or into download mode it just turns off when I try
I do not have a pc and was wondering if there is any way to unbrick my phone without a pc or if I have to use a pc how to do it?
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
XDA Visitor said:
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the homepage for your device:
Samsung Galaxy S6 Edge
Guides and other helpful information can be found in the General section. If you create an XDA account, you can ask for specific help here:
Galaxy S6 Edge Q&A, Help & Troubleshooting
The experts for your device are located there and can best assist you.
Good luck and welcome to XDA!
I have Galaxy S7.
I try to root the phone and put superman rom on and now the phone won't boot. I mean it's not booting at all. I try to boot in recovery mode and it shows
Recovery booting .... in blue and it goes to blue screen and it says in red custom binary blocked by secure boot (boot img) and also "system software not authorized by att has been found on your phone etc.
And when I go downloading mode it shows
Odin mode high speed
Product name smg930a
Current binary custom
System status custom
Fap lock on
Warranty voided 0x0
Qualcomm secure boot enabled
Rp swrev: n4 (2,1,1,1 ) k1 s3
Secure download enable
You can't flash a stock ROM from download mode with ODIN?
Well you can try to flash back a stock rom or try to recover the firmware with samsung kies 3.