Database Info

[Q] GT-I9200 bootloop after 4.4.2 OTA Update

Hi there i have a GT-I9200 stock on boot after installing the OTA update 4.4.2 The device boot shows the Smasung Logo and the restart I tried to download the rom and install via Oden everything normal but not when flash boot and recovery it skipped it and flash System ext4 and whin device complete download and restart it shows a message that the device will enter recovery mode but there is no recovery in the device and keep restarting and shows a message when boot into download mode like this
System STATUS : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
XNOX KERNEL LOCK : 0X0
XNOX WARRANTY VOID : 0X1
QUALCOMM SECUREBOOT : ENABLE
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: ENABLE
I have tried to install 4 different 4.4.2 roms it allways the same problem any one have an idea what i should do to install the rom correctly

Any one would help ???

i have many device i9200 same problem restart in loop
so i flashed it with 4 file ap+bl+md+csc
stay same problem

wipe all via recovery stoct
after flash rom, please boot go to stoct recovery (volume(+) and power and home) wipe data, wipe cache --->Done

[Q] unable to remove soft BRICK on samsung galaxy S3 ATT

experts
I tried to custom install custom rom on my samsung galaxy S III (ATT). After several unsuccessful attempts, my phone is stuck in soft brick mode (shows Samsung Galaxy after reboot and get stuck there).
I installed custom recover mode apps (CWM, TWRP). I am unable to install custom ROMs using these apps in recover mode. I get NAND write error failed and also "No OS installed error"
When I put the phone in Download mode, the device shows the following.
ODIN MODE
PRODUCT NAME: SGH-I747
Current Binary: Custom
System Status: Custom
Qualcomm Secure boot: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 3
I am guessing Samsung is blocking custom installs. I am unable to recover the phone to samsung custom rom since I don't have recovery code from Samsung Kies. i can't get back to stock rom as there is no OS installed.
Can you suggest some ideas on how to get past the soft brick ?
-regards

G920x Live demo Unit : prob with TWRP

Hi all,
I know there is a lot of thread about this model, but I still have a problem.
I have root with CF-Auto-Root-zeroflte-zerofltedv-smg920i but can't install TWRP or Clockwork recovery...still stock one is present...
I have noticed I have to push buttons Volume up + home + power before Samsung Logo appears to prevent from flashing back by installed stock rom...
But, when I try, the phone freezes on Samsun Logo (first one) and I have to reboot (I have wait more than 15 minutes)
When The phone reboots itself after root, stock recovery is still present
When I try to install TWRP (twrp-2.8.7.1-zeroflte.img.tar) with Odin, same issue
I tried lot of stock rom from sammobile, but all fail at the beginning of writing Nand.
So I can't install any rom on this "phone"
In the recovery, modele appears as LRX22G.G920IDVU1AOC6
In download mode I have
Odin Mode
PRODUCT NAME : SM-G920X
Current binary : Custom
System Status : Custom
Secure download : enable
Knox warrenty void : 1 (8x9500)
AP SWREV : 1
Kernel AP SWREV : 1
Click to expand...
Click to collapse
If someone could help me.....
Thank a lot

Sell it..!!!

look in my thread how to solved this

All Answers can be found here

[Completed] [Need Help] Can't unlock bootloader on Samsung Galaxy Core Prime

Hi, I'm new here and I'm new at rooting/Modding android devices.
So first of all I have a Samsung Galaxy Core Prime (SM-G361F) I got it from T-Mobile and its running Android version 5.1.1
I was trying to root it and the only way i was able to root it was to flash a pre-rooted firmware from Here
Now I wanted to install TWRP custom recovery so I went over on this Site and tried every method listed there, especially the Odin install method. When I go into Download mode/Odin Mode it says:
Code:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
At this point I got Odin v3. 10 running and flashed TWRP on my device (in Odin I says PASS!), then it restarted and booted normally into Android. I powered it off and then I held the key combo to enter recovery mode (volume up+home+power) and after it vibrated the Samsung Galaxy Core Prime logo comes on with the powered by Android thing and on the top left corner it says in red text "RECOVERY IS NOT SEANDROID ENFORCING" and nothing happens if I hold the power button for 10 seconds it shuts down and I am able to enter the Download/Odin mode with the proper key combo (volume down+home+power) but can't boot into TWRP or Android any more. What did I do wrong? Any help would be much appreciated.

MrW00dy said:
Hi, I'm new here and I'm new at rooting/Modding android devices.
So first of all I have a Samsung Galaxy Core Prime (SM-G361F) I got it from T-Mobile and its running Android version 5.1.1
I was trying to root it and the only way i was able to root it was to flash a pre-rooted firmware from Here
Now I wanted to install TWRP custom recovery so I went over on this Site and tried every method listed there, especially the Odin install method. When I go into Download mode/Odin Mode it says:
Code:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
At this point I got Odin v3. 10 running and flashed TWRP on my device (in Odin I says PASS!), then it restarted and booted normally into Android. I powered it off and then I held the key combo to enter recovery mode (volume up+home+power) and after it vibrated the Samsung Galaxy Core Prime logo comes on with the powered by Android thing and on the top left corner it says in red text "RECOVERY IS NOT SEANDROID ENFORCING" and nothing happens if I hold the power button for 10 seconds it shuts down and I am able to enter the Download/Odin mode with the proper key combo (volume down+home+power) but can't boot into TWRP or Android any more. What did I do wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
Hi
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in > Android Development and Hacking > Android Q&A, Help & Troubleshooting > Who wants root/custom recovery/custom roms for the core prime? Experts there may be able to help you.
Good luck

Please help s7 is bricked I can not boot the phone

I have Galaxy S7.
I try to root the phone and put superman rom on and now the phone won't boot. I mean it's not booting at all. I try to boot in recovery mode and it shows
Recovery booting .... in blue and it goes to blue screen and it says in red custom binary blocked by secure boot (boot img) and also "system software not authorized by att has been found on your phone etc.
And when I go downloading mode it shows
Odin mode high speed
Product name smg930a
Current binary custom
System status custom
Fap lock on
Warranty voided 0x0
Qualcomm secure boot enabled
Rp swrev: n4 (2,1,1,1 ) k1 s3
Secure download enable

You can't flash a stock ROM from download mode with ODIN?

Well you can try to flash back a stock rom or try to recover the firmware with samsung kies 3.