I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
XDA Visitor said:
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the homepage for your device:
Samsung Galaxy S6 Edge
Guides and other helpful information can be found in the General section. If you create an XDA account, you can ask for specific help here:
Galaxy S6 Edge Q&A, Help & Troubleshooting
The experts for your device are located there and can best assist you.
Good luck and welcome to XDA!
Related
Hi there i have a GT-I9200 stock on boot after installing the OTA update 4.4.2 The device boot shows the Smasung Logo and the restart I tried to download the rom and install via Oden everything normal but not when flash boot and recovery it skipped it and flash System ext4 and whin device complete download and restart it shows a message that the device will enter recovery mode but there is no recovery in the device and keep restarting and shows a message when boot into download mode like this
System STATUS : SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
XNOX KERNEL LOCK : 0X0
XNOX WARRANTY VOID : 0X1
QUALCOMM SECUREBOOT : ENABLE
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: ENABLE
I have tried to install 4 different 4.4.2 roms it allways the same problem any one have an idea what i should do to install the rom correctly
Hi there,
I'd suggest asking in this help thread: Galaxy Mega Q&A, Help & Troubleshooting - Help thread
Thank you and thread closed
I tried to root my phone, and after doing what I thought was the correct thing I am now unable to boot android. The phone has a screen saying Do Not Turn Off Target Device, and when I can get it in to odin mode usually goes back to that screen, occasionally I can get into the recovery, and I wiped partition data and cache data.
When it goes to Odin Mode it says:
Product Name: GT-I9305T
Custom Binary Download: Yes (29 Counts)
Current Binary: Custom
System Status: Offical
Knox Warranty Void: Yes
AP SWREV: A2
I believe you'd need a stock firmware flashed in order to boot.
Please post in Australian Galaxy S3 Thread so that one of the experts may be of help.
The information given on the phone is as follows:
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I was trying to flash a custom ROM, Alliance ROM, and I was in the TWRP custom recovery screen. I clicked install, installed the ROM and it rebooted. The ROM did not work however so I figured I'd give it another shot and reboot again. This time I rebooted through the TWRP menu and that's how I got stuck in Odin Mode.
XDA Visitor said:
The information given on the phone is as follows:
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I was trying to flash a custom ROM, Alliance ROM, and I was in the TWRP custom recovery screen. I clicked install, installed the ROM and it rebooted. The ROM did not work however so I figured I'd give it another shot and reboot again. This time I rebooted through the TWRP menu and that's how I got stuck in Odin Mode.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is the main forum area for your device:
(You'll want to bookmark this)
http://forum.xda-developers.com/note-4
Here is where you should ask for help:
http://forum.xda-developers.com/note-4/help/noob-friendly-question-t2866810
The experts for your device are located there and will be able to help.
Good luck!
Hi, I'm new here and I'm new at rooting/Modding android devices.
So first of all I have a Samsung Galaxy Core Prime (SM-G361F) I got it from T-Mobile and its running Android version 5.1.1
I was trying to root it and the only way i was able to root it was to flash a pre-rooted firmware from Here
Now I wanted to install TWRP custom recovery so I went over on this Site and tried every method listed there, especially the Odin install method. When I go into Download mode/Odin Mode it says:
Code:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
At this point I got Odin v3. 10 running and flashed TWRP on my device (in Odin I says PASS!), then it restarted and booted normally into Android. I powered it off and then I held the key combo to enter recovery mode (volume up+home+power) and after it vibrated the Samsung Galaxy Core Prime logo comes on with the powered by Android thing and on the top left corner it says in red text "RECOVERY IS NOT SEANDROID ENFORCING" and nothing happens if I hold the power button for 10 seconds it shuts down and I am able to enter the Download/Odin mode with the proper key combo (volume down+home+power) but can't boot into TWRP or Android any more. What did I do wrong? Any help would be much appreciated.
MrW00dy said:
Hi, I'm new here and I'm new at rooting/Modding android devices.
So first of all I have a Samsung Galaxy Core Prime (SM-G361F) I got it from T-Mobile and its running Android version 5.1.1
I was trying to root it and the only way i was able to root it was to flash a pre-rooted firmware from Here
Now I wanted to install TWRP custom recovery so I went over on this Site and tried every method listed there, especially the Odin install method. When I go into Download mode/Odin Mode it says:
Code:
ODIN MODE(MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
At this point I got Odin v3. 10 running and flashed TWRP on my device (in Odin I says PASS!), then it restarted and booted normally into Android. I powered it off and then I held the key combo to enter recovery mode (volume up+home+power) and after it vibrated the Samsung Galaxy Core Prime logo comes on with the powered by Android thing and on the top left corner it says in red text "RECOVERY IS NOT SEANDROID ENFORCING" and nothing happens if I hold the power button for 10 seconds it shuts down and I am able to enter the Download/Odin mode with the proper key combo (volume down+home+power) but can't boot into TWRP or Android any more. What did I do wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
Hi
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in > Android Development and Hacking > Android Q&A, Help & Troubleshooting > Who wants root/custom recovery/custom roms for the core prime? Experts there may be able to help you.
Good luck
UPDATE!!
Fixed!!
I installed "TWRP" by flashing it with Odin, then got stuck in bootloop.
Installed Super SU in TWRP Recovery, and it was working again, phone booted normal and I have root.
Hi,
Ok so I can't find anything that works for me on the web, so hopefully someone can help me with this.
I'm trying to root my Samsung Galaxy S6, but it's not working.
I have tried CF-Auto-ROOT with ODIN, but after using that the phone reboots and saying "recovery is not seandroid enforcing" .
Then reboots again, and the text is gone and phone works like normal, but no SuperSU, and it's not rooted. It does say at status: Custom.
In Odin it says: PASSED, and no errors, so really strange.
Now I was trying to use recovery. (Power+vol up+menu)
First it's giving me a blue screen saying "installing system update" then a "No Command" error, then the Android Recovery is showed.
So I did a wipe-data in the recovery, and now it's saying at status: official again.
But i still want root of course.
This is the one i have used.
desktop.firmware.mobi/device:403/firmware:13472 URL
CF-Auto-Root:
Configure: CF-AUTO-ROOT
With all marks on default.
My Phone details:
Code:
Samsung Galaxy S6 (SM-G920F)
Android 7.0
Baseband-version: G20FXXU5EQI4
Kernelversion: 3.10.61-10958180
[email protected]#1
Buildnumber: NRD90M.G920FXXU5EQI6
Status: SE for Android:
Enforcing
SEPF_SECMOBILE_7.0_0005
When in download modus it's saying:
Code:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: Samsung Official [I][COLOR="Silver"](After wipe-data, before it says CUSTOM, after my Odin actions)[/COLOR][/I]
SYSTEM STATUS: Official [I][COLOR="Silver"](After wipe-data, before it says CUSTOM, after my Odin actions)[/COLOR][/I]
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Little detail: I did set USB-Debug on, but first time forgot to disable the option "Verify apps over USB".
I have tried again with also that one disabled, but still no luck.
I really hope someone can help me with this, Google wasn't my friend this time