UPDATE!!
Fixed!!
I installed "TWRP" by flashing it with Odin, then got stuck in bootloop.
Installed Super SU in TWRP Recovery, and it was working again, phone booted normal and I have root.
Hi,
Ok so I can't find anything that works for me on the web, so hopefully someone can help me with this.
I'm trying to root my Samsung Galaxy S6, but it's not working.
I have tried CF-Auto-ROOT with ODIN, but after using that the phone reboots and saying "recovery is not seandroid enforcing" .
Then reboots again, and the text is gone and phone works like normal, but no SuperSU, and it's not rooted. It does say at status: Custom.
In Odin it says: PASSED, and no errors, so really strange.
Now I was trying to use recovery. (Power+vol up+menu)
First it's giving me a blue screen saying "installing system update" then a "No Command" error, then the Android Recovery is showed.
So I did a wipe-data in the recovery, and now it's saying at status: official again.
But i still want root of course.
This is the one i have used.
desktop.firmware.mobi/device:403/firmware:13472 URL
CF-Auto-Root:
Configure: CF-AUTO-ROOT
With all marks on default.
My Phone details:
Code:
Samsung Galaxy S6 (SM-G920F)
Android 7.0
Baseband-version: G20FXXU5EQI4
Kernelversion: 3.10.61-10958180
[email protected]#1
Buildnumber: NRD90M.G920FXXU5EQI6
Status: SE for Android:
Enforcing
SEPF_SECMOBILE_7.0_0005
When in download modus it's saying:
Code:
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: Samsung Official [I][COLOR="Silver"](After wipe-data, before it says CUSTOM, after my Odin actions)[/COLOR][/I]
SYSTEM STATUS: Official [I][COLOR="Silver"](After wipe-data, before it says CUSTOM, after my Odin actions)[/COLOR][/I]
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Little detail: I did set USB-Debug on, but first time forgot to disable the option "Verify apps over USB".
I have tried again with also that one disabled, but still no luck.
I really hope someone can help me with this, Google wasn't my friend this time
Related
I tried to root my phone, and after doing what I thought was the correct thing I am now unable to boot android. The phone has a screen saying Do Not Turn Off Target Device, and when I can get it in to odin mode usually goes back to that screen, occasionally I can get into the recovery, and I wiped partition data and cache data.
When it goes to Odin Mode it says:
Product Name: GT-I9305T
Custom Binary Download: Yes (29 Counts)
Current Binary: Custom
System Status: Offical
Knox Warranty Void: Yes
AP SWREV: A2
I believe you'd need a stock firmware flashed in order to boot.
Please post in Australian Galaxy S3 Thread so that one of the experts may be of help.
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
XDA Visitor said:
I rooted my phone using a custom kernel only with odin. prior to that i had android 5.1.1 running smoothly and everything was ok.
But in the process of rooting my phone i came across a new custom rom that i like dand wanted to install (XtreStoLite) 3.0
after rooting the phone successfully with odin using the following file (S6-UniBase_BOG8_v2.tar) it started saying -Kernel is not seandroid enforcing-
but the instructions said ignore it so i did. everything worked fine except private mode. So I set out to bring it back by installing a custom rom.
then i installed live boot from playstore and started using it (if this info makes a difference)
the phone was working fine after this too.
then i installed twrp the phone was still working fine.
then i copied the Custom rom to the phone plus the addon from/details http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
then i booted into recovery mode and flashed the rom and the addon.
and now the phone doesnot go further than the first screen on boot it still says (recovery is not seandroid enforcing).
in the download mode it says the following
ODIN MODE
PRODUCT NAME: SW-G925I
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
SECURE DOWNLOAD: ENABLED
KNOX WARRANTY VOID: 1 (0x0301)
RP SWREV: B:3 K:2 S:2
Any guesses how to make it work??
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the homepage for your device:
Samsung Galaxy S6 Edge
Guides and other helpful information can be found in the General section. If you create an XDA account, you can ask for specific help here:
Galaxy S6 Edge Q&A, Help & Troubleshooting
The experts for your device are located there and can best assist you.
Good luck and welcome to XDA!
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?
J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Kisu1337 said:
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
hey try flashing the phone with a stck firmware and check the nand erase on odin
Kisu1337 said:
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
did you factory reset after flashing it? if not, boot into stock recovery and factory reset it.
also, the screen should NOT go black when flashing in Odin. That is peculiar and also might be part of your problem
hi im trying to flash stock rom on my s7 sm-g930f because i have bricked it. when i try to flash the stock rom with odin i get a fail everytime
in the download mode it says
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAB LOCK: OFF
SECURE DOWNLOAD : ENABLED
WARRENTY WOID: 1 (0X030C)
AP SWAEV B:8 K:6 S:7 (I THINK ITS HARD TO SEE)
AND WHEN ODIN FAILS THIS POPS UP (SW REV CHECK FAIL(BOOTLOADER) DEVICE 8, BINARY: 3)
I Dont know what is wrong can some one pls help me
Did you run odin with admin rights?