hi im trying to flash stock rom on my s7 sm-g930f because i have bricked it. when i try to flash the stock rom with odin i get a fail everytime
in the download mode it says
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAB LOCK: OFF
SECURE DOWNLOAD : ENABLED
WARRENTY WOID: 1 (0X030C)
AP SWAEV B:8 K:6 S:7 (I THINK ITS HARD TO SEE)
AND WHEN ODIN FAILS THIS POPS UP (SW REV CHECK FAIL(BOOTLOADER) DEVICE 8, BINARY: 3)
I Dont know what is wrong can some one pls help me
Did you run odin with admin rights?
Related
I tried flashing a rom on odin and it failed so i tried flashing it 3 more times and got the same results i've tried pulling out the battery going into download mode and still nothing it just takes me back to the screen that says this
ODIN MODE
Product Name: SCH-R530M
CUSTOM BINARY DOWNLOAD: Yes (4 counts)
CURRENT BINARY: custom
SYSTEM STATUS: CUSTOM
QUALCOM SECUREBOOT: ENABLED
SOMEONE HELP PLEASE :crying::crying::crying::crying:
hello,
i have a samsung galaxy s3 its stuck in odin mode.. when i turn it on theres an issue 'FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE USE SOFTWARE REPAIR ASSISTANT AND TRY AGAIN'
My phone odin mode..
product name: sch-i535
custon binary download: yes(1 counts)
current binary: custom
system status:none
qualcomm secureboot: enable
warranty bit:1
bootloader ap swrev :1
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?
J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.
I´ve succesfully flashed the phone with odin and the A510FXXS8CSC2 rom but when i reboot , the samsung logo remains flashing forever.
I can enter the downloading mode and the parameters are:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-A510F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
Secure download: Enabled
WARRANTY VOID: 1 (0x030c)
RP SWREV: B:8 K:3 S:4
Any ideas on how to fix it?
Thanks
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Kisu1337 said:
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
hey try flashing the phone with a stck firmware and check the nand erase on odin
Kisu1337 said:
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
did you factory reset after flashing it? if not, boot into stock recovery and factory reset it.
also, the screen should NOT go black when flashing in Odin. That is peculiar and also might be part of your problem