OP Junior Member2 posts Thanks: 0
Help me please I rooted my prime with kingroot that went great. I then downloaded and installed the twrp I flashed it using flashify it then re booted upon reboot it would not boot past the Samsung logo with this dialogue in the upper left hand corner
Odin mode
Product name : sm- g360t1
Current binary: Samsung official
System status : official
FAP lock: off
Qaulcomm secureboot: enable (csb)
Rp swrev: s1 t1 h1 r1 a1 p1
Secure download: enable
I can't get it to hard reset or into download mode it just turns off when I try
I do not have a pc and was wondering if there is any way to unbrick my phone without a pc or if I have to use a pc how to do it?
Related
The information given on the phone is as follows:
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I was trying to flash a custom ROM, Alliance ROM, and I was in the TWRP custom recovery screen. I clicked install, installed the ROM and it rebooted. The ROM did not work however so I figured I'd give it another shot and reboot again. This time I rebooted through the TWRP menu and that's how I got stuck in Odin Mode.
XDA Visitor said:
The information given on the phone is as follows:
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I was trying to flash a custom ROM, Alliance ROM, and I was in the TWRP custom recovery screen. I clicked install, installed the ROM and it rebooted. The ROM did not work however so I figured I'd give it another shot and reboot again. This time I rebooted through the TWRP menu and that's how I got stuck in Odin Mode.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is the main forum area for your device:
(You'll want to bookmark this)
http://forum.xda-developers.com/note-4
Here is where you should ask for help:
http://forum.xda-developers.com/note-4/help/noob-friendly-question-t2866810
The experts for your device are located there and will be able to help.
Good luck!
My Samsung Galaxy Grand 2 G7105 (Hong Kong firmware ZHUANL3) could not do normal boot after rooting it with cf auto root through ODIN 3.09. It became stuck in download mode everytime I boot showing this:
Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G7105
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE (CSB)
Warranty Bit: 1
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: Enable
How can I fix this? Will flashing the stock firmware work? Thanks in advance.
Hi, thank you for using XDA Assist. yes, flashing the stock firmware with odin should fix your problem.
I need help recovering my galaxy note 4 model sm n910f.
I tried installing TWRP recovery using TWRP Manager from playstore the installation was unsuccessful now the phone wont boot and is stuck in odin mode.it displays the following
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME:SM N910F
CURRENT BINARY:Custom
SYSTEM STATUS :Custom
REACTIVATION LOCK(KK): ON
KNOX WARRANTY VOID :0×1
QUALCOMM SECUREBOOT : ENABLE (CSB)
AP SWAREV : S1, T1, A1, A1, P1
SECURE DOWNLOAD :ENABLE
UDC START
Phone is on stock rooted 4.4.4 kitkat
Solution greatly appreciated
i've rooted my samsung galaxy j5 with succes.
i have installed flashify and pressed on boot image,
afther that i choose a random picture
then my phone restarted but he doesn't reboot
so i reboot him but now every time i reboot my phone he goes automaticly to the recovery mode
en when i press reboot system now
he does nothing.
left on on the top is written odin mode
product name: DM-J500FN
current binary: Custom
system status: Custom
FRP lock: off
knox warranty void: 0x1 (4)
qualcomm secureboot: enable (csb)
ap swrev: s1, t1, h1, r1, a1, p1
secure download: enable
jonasjanssens said:
i've rooted my samsung galaxy j5 with succes.
i have installed flashify and pressed on boot image,
afther that i choose a random picture
then my phone restarted but he doesn't reboot
so i reboot him but now every time i reboot my phone he goes automaticly to the recovery mode
en when i press reboot system now
he does nothing.
left on on the top is written odin mode
product name: DM-J500FN
current binary: Custom
system status: Custom
FRP lock: off
knox warranty void: 0x1 (4)
qualcomm secureboot: enable (csb)
ap swrev: s1, t1, h1, r1, a1, p1
secure download: enable
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread
Samsung Galaxy J5 SM-J500F SM-J500FN SM-J500H SM-J500M | ROM + ROOT + TWRP + Firmware
Try posting your query there. Hopefully the experts will be able to help you.
Good luck
Art Vanderlay
XDA Assist
Hi everyone , i have a Samsung J5 2016(SM-J510FN) , i have stock ROM + Root + TWRP on the phone, 2 days ago i try to make factory reset from android menu , after that my phone restarted but every time start only in TWRP recovery mode , i try it to make it a clean install with Odin but every time is stuck on <ID:0/004> aboot.mbn , or an older version of Odin give me fail , i try it to install a custom rom with twrp , install succesfuly but start again only in TWRP recovery mode , i try to use SmartSwitch from samsung , but say my S/N is not valid ( i think becouse is from Romania) , on Download mode i have this mesage if help
Product Name SM-J510FN
Curent Bynary: Custom
System Status: Custom
Fap Lock: OFF
Waranty void: 0x1 (2)
Qualcom Secureboot: Enable (CSB)
RP SWREV: S1 , T1, R1, A2, P1
Secure Download: Enable
i try to flash another TWRP to fix it problem , stuck on image.img , how can i unbrick this idiot phone?