[Completed] [Q] [HELP!] Could not do normal boot after rooting Samsung Galaxy Grand 2 - XDA Assist

My Samsung Galaxy Grand 2 G7105 (Hong Kong firmware ZHUANL3) could not do normal boot after rooting it with cf auto root through ODIN 3.09. It became stuck in download mode everytime I boot showing this:
Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-G7105
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE (CSB)
Warranty Bit: 1
RP SWREV: S2, T2, R2, A2, P2
WRITE PROTECTION: Enable
How can I fix this? Will flashing the stock firmware work? Thanks in advance.

Hi, thank you for using XDA Assist. yes, flashing the stock firmware with odin should fix your problem.

Related

[Q] stuck in odin mode

hello,
i have a samsung galaxy s3 its stuck in odin mode.. when i turn it on theres an issue 'FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE USE SOFTWARE REPAIR ASSISTANT AND TRY AGAIN'
My phone odin mode..
product name: sch-i535
custon binary download: yes(1 counts)
current binary: custom
system status:none
qualcomm secureboot: enable
warranty bit:1
bootloader ap swrev :1

[Completed] Note 4 Stuck in Odin Downloader

The information given on the phone is as follows:
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I was trying to flash a custom ROM, Alliance ROM, and I was in the TWRP custom recovery screen. I clicked install, installed the ROM and it rebooted. The ROM did not work however so I figured I'd give it another shot and reboot again. This time I rebooted through the TWRP menu and that's how I got stuck in Odin Mode.
XDA Visitor said:
The information given on the phone is as follows:
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I was trying to flash a custom ROM, Alliance ROM, and I was in the TWRP custom recovery screen. I clicked install, installed the ROM and it rebooted. The ROM did not work however so I figured I'd give it another shot and reboot again. This time I rebooted through the TWRP menu and that's how I got stuck in Odin Mode.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is the main forum area for your device:
(You'll want to bookmark this)
http://forum.xda-developers.com/note-4
Here is where you should ask for help:
http://forum.xda-developers.com/note-4/help/noob-friendly-question-t2866810
The experts for your device are located there and will be able to help.
Good luck!

Galaxy note 4 sm n910f stuck in odin mode

I need help recovering my galaxy note 4 model sm n910f.
I tried installing TWRP recovery using TWRP Manager from playstore the installation was unsuccessful now the phone wont boot and is stuck in odin mode.it displays the following
Could not do normal boot
ODIN MODE (HIGH SPEED)
PRODUCT NAME:SM N910F
CURRENT BINARY:Custom
SYSTEM STATUS :Custom
REACTIVATION LOCK(KK): ON
KNOX WARRANTY VOID :0×1
QUALCOMM SECUREBOOT : ENABLE (CSB)
AP SWAREV : S1, T1, A1, A1, P1
SECURE DOWNLOAD :ENABLE
UDC START
Phone is on stock rooted 4.4.4 kitkat
Solution greatly appreciated

Bricked Rooted Galaxy Core Prime

OP Junior Member2 posts Thanks: 0
Help me please I rooted my prime with kingroot that went great. I then downloaded and installed the twrp I flashed it using flashify it then re booted upon reboot it would not boot past the Samsung logo with this dialogue in the upper left hand corner
Odin mode
Product name : sm- g360t1
Current binary: Samsung official
System status : official
FAP lock: off
Qaulcomm secureboot: enable (csb)
Rp swrev: s1 t1 h1 r1 a1 p1
Secure download: enable
I can't get it to hard reset or into download mode it just turns off when I try
I do not have a pc and was wondering if there is any way to unbrick my phone without a pc or if I have to use a pc how to do it?

Problem after flashing rom on Samsung A5 (2016)

I´ve succesfully flashed the phone with odin and the A510FXXS8CSC2 rom but when i reboot , the samsung logo remains flashing forever.
I can enter the downloading mode and the parameters are:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-A510F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
Secure download: Enabled
WARRANTY VOID: 1 (0x030c)
RP SWREV: B:8 K:3 S:4
Any ideas on how to fix it?
Thanks

Categories

Resources