I have no idea where this should be posted. Sorry if this is not it.
I have an Asus Zenpad S 8.0 z580ca that needs the touchscreen replaced. Unfortunately it is bonded to the LCD with some type of glue and I cannot separate the two. I have searched, but cannot seem to find any replacements. I did find the touchscreen itself for sale, but without the LCD it is of no use.
I also have the z580c model of this pad. Even though the specs for the LCD are the same, they can't be swapped because the touchscreen is not the same. I really wish they had just used the touch from the z580c on both. It seems to be a lot more durable than the Gorilla Glass.
If there is anyone out there that has information as to where I could find the LCD assembly I would be grateful.
bwquestion said:
I have no idea where this should be posted. Sorry if this is not it.
I have an Asus Zenpad S 8.0 z580ca that needs the touchscreen replaced. Unfortunately it is bonded to the LCD with some type of glue and I cannot separate the two. I have searched, but cannot seem to find any replacements. I did find the touchscreen itself for sale, but without the LCD it is of no use.
I also have the z580c model of this pad. Even though the specs for the LCD are the same, they can't be swapped because the touchscreen is not the same. I really wish they had just used the touch from the z580c on both. It seems to be a lot more durable than the Gorilla Glass.
If there is anyone out there that has information as to where I could find the LCD assembly I would be grateful.
Click to expand...
Click to collapse
Hi,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in Android Q&A,Help and Troubleshooting or in the friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you.
Good luck
Related
Hi!
I saw few people talking about digitizer replacement on old devices. This discussion about newer devices like Touch Pro2. I have a device which has working LCD but problem seems to be with its touch senstivity. Its not supporting touch on the screen, which as per the original user is a problem of digitizer. He fell the device & got this problem.
May I know if it is a problem of digitizer since everything works completely, all hardware buttons & everything but touch support.
Can you plz help me in this problem, I got the digitizer but dont know how to put it & make the device working.
Any technical help would be highly appreciated.
Sunny
bump, lolz, seems you guyz are also answer less like me.
Anyone tried disassembling such high end device? or has anyone tried replacing digitizer on his or her end?
I wish to help others in case I get a small bit of information about their personal experience.
well broke the digitizer and lcd. Wanted to know if theres a way to connect my phone to my laptop and use it as a display temporarily
Hi
Thanks for writing to us at XDA Assist. Give this a try:
[Tool][Windows] Control a device with a broken screen. Now with touchscreen support!!
No response in two days, thread closed, thanks.
Hi
I have a Nexus 4 that I dropped a few too many times.
Now part of the screen is unresponsive to touch (and once in a while a get a ghost touch).
I'm about 99.9% sure this is a hardware issue - so my question is:
what do I need to replace? The LCD screen seems to be working fine and also the glass is intact. you could only tell there is a problem by actually using the phone.
Is it the digitizer that is in charge of the touch?
Also if it is - can I replace it myself or should I go to an expert?
I know it is a matter of technical skill, but I heard that replacing the digitizer alone may be too difficult as opposed to other parts.
Thanks for your help
Hi there,
See bellow few discussions about this issue:
Nexus 4 screen cracked - replace with only digitizer or full
Nexus 4 GPS not Fixing after Screen Replacement FIXED , GPS Antenna MOD!
Read and ask about just in one of that threads or directly here:
[HELP THREAD] nexus4 Ask any question.
Good luck
Greetings,I got that tablet today. It was previously used by some other guy very rarely for just around a month . He never dropped it and was always in it's leather case when not in use. He described to me that one part of screen in upper part is not working. I checked it and found out that there is a space in in the upper part of the screen,about 2 cm in height stretching to both ends,is not responding but then above it touch works fine again. On tablet is stock Android 4.1.1. What is causing the issue?
I tested that non working area in a paint app.I found out it is in a shape of perfect rectangle,something like this http://i.stack.imgur.com/2QrJS.png(on the image are two rectangles,for me only one of those areas are not working)
Bump
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hi All
I bought a tablet Leotec letab911 (rk3188,9.7,2gb ram,16gb,2048x1536,mali400....). The tablet slips from my hands, and broke touch:crying:.
When I called the company to buy a replacement, the price was outrageous. so I bought a touch by aliexpress and I put myself.
And here is the problem.
the touch works, but it seems that the resolution of that I bought is higher than the original
|---------------|----------------| <---- if this were the touch, any finger to make him up, appears only in the upper left quadrant
| *****
|---------------|----------------| <--- it seems that the resolution was set to 1024x768 in the rom
|
|--------------|----------------|
I unpacked ROM with utilities imgRePackerRK, RK factory tools and others
but there is no ft5x0x.ko module, any script.bin to conver in .fex
I tried to find /dev/block/nanda like allwiner tablets, but without result becouse i found dev/block/mtd
It's posible? edit the configuration of touch elsewhere.
or inject the kernel Another resolution, if it's there.
Any help will be well pleased
Thank you very much in advance.
Hi,
Try posting your question here with all relevant details:
Hardware Hacking General
The experts there may be able to help.
Good luck!