Greetings,I got that tablet today. It was previously used by some other guy very rarely for just around a month . He never dropped it and was always in it's leather case when not in use. He described to me that one part of screen in upper part is not working. I checked it and found out that there is a space in in the upper part of the screen,about 2 cm in height stretching to both ends,is not responding but then above it touch works fine again. On tablet is stock Android 4.1.1. What is causing the issue?
I tested that non working area in a paint app.I found out it is in a shape of perfect rectangle,something like this http://i.stack.imgur.com/2QrJS.png(on the image are two rectangles,for me only one of those areas are not working)
Bump
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Related
Hi folks (my first post!) and I need some help. I have 2 of the above tablets and both are working fine. However I dropped one and the touch screen has a hairline crack although it is fully working.
I have purchased a new touch screen but I am not sure how to open the Tablet so I can replace it. Can anyone help me as to how I open it without causing any damage. I have successfully replaced the speakers on my Nexus 7 but that was easy as good old youtube covers this.
Any help would be much appreciated ,
Thanks in advance
Help
ohio9876 said:
Hi folks (my first post!) and I need some help. I have 2 of the above tablets and both are working fine. However I dropped one and the touch screen has a hairline crack although it is fully working.
I have purchased a new touch screen but I am not sure how to open the Tablet so I can replace it. Can anyone help me as to how I open it without causing any damage. I have successfully replaced the speakers on my Nexus 7 but that was easy as good old youtube covers this.
Any help would be much appreciated ,
Thanks in advance
Click to expand...
Click to collapse
Is it fair to assume that nobody knows the answer or does nobody read these??http://cdn3.xda-developers.com/images/smilies/frown.gif
Hi All
I bought a tablet Leotec letab911 (rk3188,9.7,2gb ram,16gb,2048x1536,mali400....). The tablet slips from my hands, and broke touch:crying:.
When I called the company to buy a replacement, the price was outrageous. so I bought a touch by aliexpress and I put myself.
And here is the problem.
the touch works, but it seems that the resolution of that I bought is higher than the original
|---------------|----------------| <---- if this were the touch, any finger to make him up, appears only in the upper left quadrant
| *****
|---------------|----------------| <--- it seems that the resolution was set to 1024x768 in the rom
|
|--------------|----------------|
I unpacked ROM with utilities imgRePackerRK, RK factory tools and others
but there is no ft5x0x.ko module, any script.bin to conver in .fex
I tried to find /dev/block/nanda like allwiner tablets, but without result becouse i found dev/block/mtd
It's posible? edit the configuration of touch elsewhere.
or inject the kernel Another resolution, if it's there.
Any help will be well pleased
Thank you very much in advance.
Hi,
Try posting your question here with all relevant details:
Hardware Hacking General
The experts there may be able to help.
Good luck!
I was on the train today in london, england and I happened to see that the man sitting next to me was holding a phone that for the life of me I have been unable to identify. I know of most popular phones and brands but this one has eluded me. The man was of an oriental persuasion and was in his 20's so this may be a phone from an eastern manufacturer that no one has heard of over hear as they are a lot of oriental students in this area?. The first thing that caught my eye was that the phone was running android N 7.0 (I assume one of the developer builds) However he was not on a nexus device. Bear in mind that on the day of this post Android N 7.0 has not yet been released?. If any one can help identify this phone then please reply as this has been bugging me ever since here are all of the phone details I was able to see.
- It had a full metal body
- 2.5D glass screen between 5.5"-5.7"
- Rear mounted circular fingerprint sensor
- Cameras in the top corner of back and front (so not in the middle like a samsung or LG phone more like iphones positioning for camera)
- USB type C port
- Dual speaker grills flanking the USB C port on the bottom which were not machined into the body (like on the HTC 10) but rather had slits cut out for them and they sat slightly recessed into the frame behind a mesh
- On screen navigation keys
- Stock android 7.0 N
- It seemed to have rather apparent chamfers on the metal housing of the phone similar to the HTC 10 (but this was not the HTC 10) and given the rumors of the HTC nexus (sailfish) coming soon I found this design choice interesting?
- The phone also had antena lines in a similar place to those on the nexus 6P but this phone did not have the black visor for the camera module that the 6P has.
- I could not see a logo on the back of the phone as it had a plain black case on it which makes me think that this is unlikely to be an unreleased phone if there are cases for it? unless this is covering a logo perhaps?
And a logo on the bottom of the screen under the glass (where capacitive buttons would be) That I have tried to replicate below as it was not made from the alphabet. (the logo was a lower case t a backwards capital C and a backwards S that was broken in two halves horizontally and was in a very square and srap corner font)
t]2
This was definitely not a nexus device at least none that I know of. It could be a nexus device that has not been released as I cannot find any other devices that run stock android 7.0 as of this date and have this design? however the logo on the bottom of the screen seems to imply otherwise.
Please let me know if you have any ideas of what this phone is. thanks,
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Best regards & good luck
Trafalgar Square from XDA Assist
i broke my nexus 5 D820 upper glass accidentally for few days i was facing no problem working with my phone with a broken glass
but now my phone screen is not displaying anything nor touch is working but still my phone is working able to get calls and messaged but not able to access them LATER i realized it could be my display which has shattered possibly and i got it changed also but then also screen is not showing anything.
apart from it my phone's frame assembly is damaged from various places likewise my back panel
i have diagnosed my motherboard also it is working fine and the data is safe too
can i just swap my present phone's motherboard into another Nexus 5 D820 without loosing my data ?
Hello and thank you for using XDA Assist,
please create an account and ask in this section:
Nexus 5 Q&A, Help & Troubleshooting
The experts there will be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello there,
Anyone who is in the know pertaining cube talk 9x U65GT/16GB /3G(white), S/N 14309300615
issue:
I have this Cube tablet talk 9x touch screen replaced for the second time, but this time round , it came with a black digitizer, i thought every thing was fine and dandy, after a while about half an hour later, the touch screen did not work smoothly , scrolling /swiping was not smooth, could not zoom in and out the way it should be. The seller from Aliexpress said it will work fine when update the rom, and i ask for any rom that is available , no reply till now. Anyone who can help me, see questions below, i need to confirm before making a complain to Aliexpress on this seller, do want to be accusing the person for the wrong reason:-
1. Is it screen or ROM issue?
2. Any difference between a white and a black screen?
3. If it is ROM issue, can anyone who can guide me to the proper site to get it.
4. If it is black screen meant for 32GB, does it mean it can only be use on the 32GB unit.
need some help here, at least i need know whether it is screen or rom issue?Previous replaced screen was white one with no problems, the second one given me the problems
jamesu67 said:
Hello there,
Anyone who is in the know pertaining cube talk 9x U65GT/16GB /3G(white), S/N 14309300615
issue:
I have this Cube tablet talk 9x touch screen replaced for the second time, but this time round , it came with a black digitizer, i thought every thing was fine and dandy, after a while about half an hour later, the touch screen did not work smoothly , scrolling /swiping was not smooth, could not zoom in and out the way it should be. The seller from Aliexpress said it will work fine when update the rom, and i ask for any rom that is available , no reply till now. Anyone who can help me, see questions below, i need to confirm before making a complain to Aliexpress on this seller, do want to be accusing the person for the wrong reason:-
1. Is it screen or ROM issue?
2. Any difference between a white and a black screen?
3. If it is ROM issue, can anyone who can guide me to the proper site to get it.
4. If it is black screen meant for 32GB, does it mean it can only be use on the 32GB unit.
need some help here, at least i need know whether it is screen or rom issue?Previous replaced screen was white one with no problems, the second one given me the problems
Click to expand...
Click to collapse
Greetings and welcome to xda. If you ask your question in this thread
http://forum.xda-developers.com/showthread.php?t=2765392&page=28
The experts there will be able to guide you
Good Luck
Sawdoctor