Database Info

[Q] Touchscreen oddly failing

I have an atrix 2 and its touchscreen is failing in just one small part of it.. when I try to write in portrait mode and I touch the letter "P" it usually marks the letter "O" instead same goes with the letter "Ñ" and "L".. looks like that small part of the screen is failing. When I put the phone in landscape mode it gets real dificult to slide down the top menu (the one that says 4g, battery and signal level, the time and where notifications from other apps appear).
I've read that it may be a damaged digitalizer but I would like to run out of options before trying to to buy a new one because I dont live in the US and it would be way too expensive to get a new one and ship it to my country.. (I'm from Venezuela and shipping from other countries is really expensive, not to mention you can only spend 400$ a year which I've already spent)
I'm running supercharged V7 which I decided to install a couple days ago because of the problem I just mentioned.
I was running the 2nd ics leak before that and I had no problems for about 2months... Everything was good but one day this error showed up.
I don't want to take my phone to those guys who repair phones because I know they don't know anything about this phone which is very rare in my country.
Any help or advice regarding my problem will be greatly appreciated

had the exact same problem and got it fixed, along with another guy.
ill paste the message i sent him :
Yes i bought the touch+bezel set. Was a 10 minute operation no glue needed, i would advise against going with other (digitizer only) methods, a re-glue is never as good as the factory glue.
you will need one like this

[Q] LG G2 - Screen Cracked

Hi Devs, Members and Guests, how you doing? To be honest I was doing well until my LG G2 cracked on the top just a bit and now I can't pull my notification bar or do any operations on the top of the phone...
I re-created with Paint what happened to the top of my phone:
((check the attachment of "How My Phone Is.jpeg"))
The red and orange is exactly where the crack of the phone is, not that thick, however it's noticeable. The black marked area is where you the phone does not operate (you touch it and it doesn't do anything). The green line is safe area. Also, I'm running CM11 (recommended for any LG G2 users) with TWRP and runs very good.
Now the problem is that I really need my phone fully working again.. It works but I have to do some weird stuff so I can at least text someone. So here I got some questions that you guys can help me out:
1) How much you guys think it is to fix the screen?
2) Is it possible to change the resolution or the display in the phone so it will be displaying the ROM in the working area of the phone? Here is what I mean by that:
((check the attachment of "Question.jpg"))
3) Any other solutions you guys got?
Thanks for all of you who read and those who can reply and help. Have a good day

First off, fixing the phone will cost you, if you do it yourself, around $60-$70 bucks. That is for the LCD+Digitizer+mid body assembly. And that is by far the easiest way to repair the phone. You just switch all your internal parts from your old assembly over to the new assembly and pop your back cover on. Easy breazy. I just did this myself and my phone is now working great. As for your second question about changing the resolution, no. You can change your resolution but it will not "shrink" your screen to the usable portion. Your only option is to replace the LCD and Digitizer.

One Plus One Touchscreen

Hey guys, I want to buy a "defective" OPO for 100$. The sellers told me that a part of the touchscreen (about 13%) is not working. He says it works every once in a while but it is really rare. I was wondering if I would be able to fix this trough a Kernel or a ROM update (he runs CM12S) or if I need to change the screen completely. The guy says he had the phone for 2 months and he hasn't try to fix it because he has an iPhone (LOL)
Thanks for your answers!
Chris

messedup kid said:
Hey guys, I want to buy a "defective" OPO for 100$. The sellers told me that a part of the touchscreen (about 13%) is not working. He says it works every once in a while but it is really rare. I was wondering if I would be able to fix this trough a Kernel or a ROM update (he runs CM12S) or if I need to change the screen completely. The guy says he had the phone for 2 months and he hasn't try to fix it because he has an iPhone (LOL)
Thanks for your answers!
Chris
Click to expand...
Click to collapse
This has been answered here:
http://forum.xda-developers.com/showthread.php?p=62248858#post62248858
Please don't double post, it isn't allowed.

messedup kid said:
Hey guys, I want to buy a "defective" OPO for 100$. The sellers told me that a part of the touchscreen (about 13%) is not working. He says it works every once in a while but it is really rare. I was wondering if I would be able to fix this trough a Kernel or a ROM update (he runs CM12S) or if I need to change the screen completely. The guy says he had the phone for 2 months and he hasn't try to fix it because he has an iPhone (LOL)
Thanks for your answers!
Chris
Click to expand...
Click to collapse
Don't think how low u have to pay for opo but must think is it usable
Nearly 20% users complaining about touch issues like
1)ghost touch
2)unresponsive screen etc
http://forum.xda-developers.com/oneplus-one/help/ghost-touches-invisible-finger-t2832822
OPO tried to solve this by firmware updates but they still not fully able to manage it
New firmware with improved kernel solved lot more touch issues but draining battery a lot for most people's
So its u r decision buy or not to buy but three possibilities are
1) buy if u don't care about u r money if problem not got solved
2)buy if screen problem is not due to any hardware issues because if yes u have to replace whole screen which cost 200$
3)if its software problem then u should know most of android rooting/ flashing /custom roms/custom kernels to recover problems
If its software problem then these are some solution
http://www.ibtimes.co.uk/oneplus-on...yanogenmod-12-1-nightly-download-link-1501619
https://www.reddit.com/r/oneplus/co...ion_megathread/?_e_pi_=7,PAGE_ID10,2278873835
https://forums.oneplus.net/threads/touchscreen-issues-fix.314410/?_e_pi_=7,PAGE_ID10,1349877307
Following is hardware solution follow correctly :-
https://forums.oneplus.net/threads/...problem.186235/?_e_pi_=7,PAGE_ID10,3603659338

I bought an oneplus one with a broken screen on ebay.
Bought an replacement display with frame and some cheap tools for 50€ on aliexpress.
Replaced the broken screen + frame withing one hour. It was my first attempt to open up a smartphone ever.
Only problematic part was the earpiece, which I almost destroyed.
And also the lower antenna (which is fixed with double sided adhesive tape) bent a little bit.
But besides that it was very easy to dismantle the Oneplus One and to replace the screen/frame combo.
Compared to my other One the new screen looks absolutely identical. Only the earpiece grille is slightly different.
So. My conclusion. If your are able to unscrew a smartphone and are not completely lacking fine motoric skills, you can have a cheap Oneplus One. Watch the tutorials vids on youtube and the photos on ifixit.
cheers!
Edit:
Ah and yes. With my One the screen was shattered and not working.
So I have to agree to my previous speaker. It could also be some other part of the hardware not working. It's always a risk. But I assume, that by replacing the whole screen/frame, probably the digitizer problems should be solved.
---------- Post added at 05:32 PM ---------- Previous post was at 05:19 PM ----------
walpanmad said:
3)if its software problem then u should know most of android rooting/ flashing /custom roms/custom kernels to recover problems
Click to expand...
Click to collapse
I also wanted to mention that I also experienced ghost touch issues with my first Oneplus One.
Thats why I orderd a replacement screen in the first place. Then, in the meantime, until the display arrived, Oneplus released a firmware update and my ghost touch issues vanished.
But. I never had parts completely not responding on my screen. It was "only" a ghost touch issue.

i have it
Hey guys, i finally bought thé phone and the u, thé j and the n keys works 1 out of 10 times. Si it is not completely broke. How tout dix that?

Download YAMTT from play store. Test if you can paint everywhere on the screen.

yamtt
no I can't there is a small bar on the right that is not working

Probably a broken digitizer. I.'ve never read of anybody fixing this with a Software update. On the other hand, I'm not an expert...

Display deffekt on CUBE TALK 9X

Hi, Hope i am right to ask here for help
I has Fallen on one edge. Glas got a Cracked (Right SIde).
The Display self Shows all, but touch only works on the Craked side, the Other side Touch isnt working anymore (Only Display , no Touch)
Is it only the display deffekt, or is there another part. Don't want to Order the wrong spare Part.
Since i don't know if the touch is handled in the Display or not i thought i ask here, maybe someone could help me

Hi, a little late
But for everyone else. You can get Display or only Touch at Aliexpress.
I get one in summer 2017 for 28,-€

Im so sad...

Hello forum,
as im new here i want to say a big thank you right now..
Well i own a smartphone (UMI MAX).. a moth ago i destroyed my screen.. I decided to buy a replacement (the original one) from the gearbest eshop..
Although i placed the replacement correctly (as i see) the phone boots up the touch screen works but instead of a colourfull lcd i can only see a black one.. no totally off but black light.. Nothing more than black lighting.. I can see the difference between off and on but nothing more.. Sounds etc working 100% just lcd.. Can anyone offer me a solution please?? I have to ask for a new replacement?? or its something else.. I also tried a hard reset with flashh tool but nothing.. :crying::crying::crying:

kiriakos9102000 said:
Hello forum,
as im new here i want to say a big thank you right now..
Well i own a smartphone (UMI MAX).. a moth ago i destroyed my screen.. I decided to buy a replacement (the original one) from the gearbest eshop..
Although i placed the replacement correctly (as i see) the phone boots up the touch screen works but instead of a colourfull lcd i can only see a black one.. no totally off but black light.. Nothing more than black lighting.. I can see the difference between off and on but nothing more.. Sounds etc working 100% just lcd.. Can anyone offer me a solution please?? I have to ask for a new replacement?? or its something else.. I also tried a hard reset with flashh tool but nothing.. :crying::crying::crying:
Click to expand...
Click to collapse
Hello & welcome to xda-assist,
to my point of view you already answered the question yourself, if there's any doubt you did that replacement right and it isn't working like it should you likely made a mistake, only recommendation is to triple check the procedure you did by comparison to a replacement /tear down video and find the error, also check if you really bought the right hardware...
Following link shows some tutorials & stuff, time to solve some riddle, I'd guess..
http://bfy.tw/AAj2

Nothing till now
Dear friend, thank you for your fast response,
i contact them and i sent them a video and they answered this:
Thank you very much for ordering our product and for kindly bringing the issue to our attention.
For this problem we have confirmed with product department,the screen is not welded and needs to be reworked.
So what i have to do? i told them that i re-asseble the phone many times.. what means that the screen is not welded??
Thank you one more time my friend!!