So I have a HTC Fuze from At&t.
Last week I noticed a small circle under the LCD screen but didn't think anything of it. I already have that issue almost everyone else has with rectangular "boxes" under the lcd that did not affect performance.
Now this circle is entirely different. Pixels still light up under it but now the touchscreen thinks I'm always touching that one small spot on the bottom right. I can't do anything unless I slide it open and navigate via keyboard. The hard keys still work on the front.
So what to do now?
1. Replace lcd although I searched this forum and it doesn't seem the most popular route
2. get At&t to replace it / HTC, doubtful since it looks like it could be my fault and I didn't buy a warrenty plan anyways.
3. buy another phone
Any ideas? Anyone have the same problem?
ptrd said:
So I have a HTC Fuze from At&t.
Last week I noticed a small circle under the LCD screen but didn't think anything of it. I already have that issue almost everyone else has with rectangular "boxes" under the lcd that did not affect performance.
Now this circle is entirely different. Pixels still light up under it but now the touchscreen thinks I'm always touching that one small spot on the bottom right. I can't do anything unless I slide it open and navigate via keyboard. The hard keys still work on the front.
So what to do now?
1. Replace lcd although I searched this forum and it doesn't seem the most popular route
2. get At&t to replace it / HTC, doubtful since it looks like it could be my fault and I didn't buy a warrenty plan anyways.
3. buy another phone
Any ideas? Anyone have the same problem?
Click to expand...
Click to collapse
Do you have a screen protector on it? The easiest & cheapest thing to do is just replace the screen. It's not very hard if you're the least bit technical.
I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..
Hi
I was absent from this forum for a while (10 days that's was sooo long) but now i do my come back for a reason my g3's screen is dead.
Does anyone know how replace it and where can i find the cheapest one ... I already open my phone but i want to be sure of the method and i'm not a nood in this, my psp has been unmounted (completly ^^) and actually works very well.
Thx in advance
Antaine
If wrong section don't hesitate to move
---
I am here: http://maps.google.com/maps?ll=48.861566,2.274179
I don't think you should replace the screen by yourself. Also FYI it's not like a normal touchscreen. According to the manual, the screen is an electronic screen which changes finger touch to electric signals, hence "tochscreen". So probably you would have to play with the hardware also. I have replaced my screen for Rs.3000 (some $50) from samsung service. It feels better (even better than the stock screen).
it's only the screen parts because the phone is working and the touchscreen is working too i can use my phone i received my Gmail mail sms etc and i 've the haptic feed back when i unlock it but i don't have any image and when i unmount it everything apart the screen seems to work ...
edit: i want to change the LCD display which is dead not the external part of the screen....
Tutorial for changing the LCD panel
although note that buying a new panel would cost you quite a lot of money, you are better off buying a new phone i think
I don't want to change the panel i want to change the display and anyway i just successfuly completly unmouted the phone, i'm just looking for a webshop where i can find a cheap LCD display (normally it's ~ 30€
i don't follow you...you said you didn't want to change the external part of the screen
the screen on all touch devices consists of two parts:
the digitizer (thats the external cheap bit) that transcodes touches to digital signals
and the lcd panel (that's the internal expensive bit) that projects images
what is your problem exactly
also i suggest you take a look at ebay for parts
I want to change the lcd part
My phone seams to work because when i call it ring and i can answer it by sliding the screen where there were sliders when i send a sms it ring when i receive a gmail it ring but i din't see anything the screen is totally black ....
I hope you'll understand
Excuse i i'm not clear
tomsi191 said:
Tutorial for changing the LCD panel
although note that buying a new panel would cost you quite a lot of money, you are better off buying a new phone i think
Click to expand...
Click to collapse
^^that's your answer then
A lcd pannel is not so expansive (25~30€) i just to know a secured and confident place to buy it ....
Put new digitizer on LG G2 old one had no display at all. Put it on and now on start up LG screen it has verticle white lines. On actual screen the touch works but display is foggy(especially on bottom) and very sensitive typing. From reading on here appears to be software issue maybe? Not recognizing LCD? Do I need a kernel download? This is not my phone so don't want to do anymore than I have to get working. It is running original software that came with phone. It is AT&T. Honestly most of what I've read is way over my head. Laymen terms would be good. Thanks in advance.
My sister just broke her moto x pure.
The display works, however the digitizer do not works correctly. Cannot post pictures because the wallpaper is containing private information and i cannot change it.
She cannot use the entire screen.
For example on the lockscreen, she cannot use the 8. And the other digits works very badly. So she cannot unlock her phone.
What should I replace (screen, digitizer...) and where should I find the replacement part ?
Thank for your help
You'll need to replace both the digitizer + display as they come together. If you are good at repairing phones, you can get the display from eBay or else send your phone to service center if you don't. I would suggest you to send it to the service center.
You could use a USB OTG cable to connect a mouse and thus regain control of the device in order to clear any sensitive information prior to having someone fix it. I have bought and fixed several Moto X pure edition phones with cracked screens for family members. Most of them did alright, but one phone had the screen replaced, then a cow stepped on it. Although it didn't crack, after a while parts of the screen stopped responding to touch. The screen I replaced it with has not been damaged at all, but parts of it have stopped responding to touch as well. Sometimes I wonder if these phones don't have a particularly weak and easily damaged screen. I sometimes get my replacement screens from GadgetFix. If you fix it yourself make absolutely sure that you get a screen+frame assembly. It's just a few dollars more, and totally worth it. And be careful when you transfer the speaker grill trim to the new screen that you don't press hard enough to crack the screen.
Thanks you, I think I will change the screen and the frame.
https://m.ebay.com/itm/For-Motorola...%3A7550533015e0a9cbd9f98f63fff20079%7Ciid%3A2
Is this what I should buy ?
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
zstricky said:
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
Click to expand...
Click to collapse
Thanks !
Could you point me to a tutorial or a video explaining how to change the screen
I believe that Ifixit has a whole teardown tutorial for this phone. If not just search YouTube for (phone model) screen replacement, watch it a time or two, and then pause it while you do each individual step. If the first video you watch doesn't explain things in an understandable manner just watch another one. It's been a while since I searched for one, but I think there are at least a few good ones.