Related
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
So year i dropped my phone in the bathroom and cracked the screen and now i can only see a tiny portion of the screen. Considering i also have the newton ring on my phone i think its time for a new lcd and digitizer. Would someone with experience in this area take a look at the following link and let me know if this is all i need for a replacement.
http://cgi.ebay.com/OEM-Replacement...wItemQQptZPDA_Accessories?hash=item41473b5370
You didnt say what phone you have!
If you have a Touch Pro then it looks right - i believe the fuze screen is slightly different (no front camera) so if you use this screen on the fuze you may see something through the camera lens.
I replaced mi display , it took me 2 hours to do it, but finally it worked fine. The only issue was the new display has a different color, the digitizer just worked perfect, even better than new, but the color is different, now the colors are less vivid and less brighter, I will try to adjust the display color settings, I will do it tonight.
oh wow good eye didnt even notice that. i guess ill go with this one i just found.
http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6
hey GussMiami, do you DIY your screen replacement?
I would like to replace my LCD by myself, but I do not know how to do it,,, tried to youtube it with 'replace touch pro lcd screen' or some thing like that but came up nothing.
tq before,,,
ps: if I have blue spots on my screen, is it some kind of dead pixels?
Xue v.2 there are a couple of guides around on replacing the screen http://www.att-phones.org/att-htc-fuze-user-manual.html
I ordered a new Digitizer and LCD for my Fuze yesterday as mine is somewhat scratched up, the job does not look particularly easy, at the moment I am debating finding someone else to do it for me vs possibly wrecking my phone doing it myself, from what I have read the hardest part is making sure not to break any cables/wires (commonly I see people breaking the speaker wires).
oh thank you naiku,
well, I think I will buy the lcd+digitizer for 30usd from ebay and have htc care to replace it for me,,,
plus I need to fix the keyboard as well. Let the pro doing the fix LoL
Hi,
I've got a question related to the HTC One X. More specifically, all of a sudden my soft keys (back, home, options) started not working. The thing is, I took a look over eBay, and a screen replacement doesn't seem to be that expensive.
Unfortunately, I'm not sure which I would need to buy. I saw there is a LCD screen and a screen digitizer. Which one would I need, or would I need both? I've seen that basically the bottom keys are all connected to a strip and I figure that if I change that that part of the phone, my problem should be solved.
Now, another question would be if I should do it alone, or should I take my phone to a specialist? Taking a look over some YouTube videos, I saw that it's not that complicated to replace the screen of the phone. However, I wouldn't want to start something that would end up messing my phone ever worse than before. I'm not completely retarded when it comes to electronics, but still, better to be on the safe side.
I'm just hoping that some of you guys did this before or has experience with this sort of stuff and can offer some tips.
Thanks a bunch.
You'll need to screen and the digitizer, trying to separate then without destroying either is virtually impossible. The best option if to have it done professionally, but that is also the more expensive option obviously. If you have the right tools and the capability you can do it yourself, but I wouldn't try it unless your confident.
Sent from my Evita
So my photon Q is rather old. Shocking I'm sure. Recently the screen has started behaving very oddly. Flickers, sensitivity is weird, blacks out etc..
I thought perhaps flex ribbon due to keyboard sliding and closing but now I think may be digitizer or the lcd. I"m leaning towards digitizer becasue when it does work it looks perfectly clear. But there will be the one time i push the power to check if I have anything and nothing happens. Reset it and can see the screen wants to do something but can't decide what. Reset over and over and eventually boots up fine.
Digitizer?
Thanks for any info.
Anybody able to chime in
Flickering screen can't have anything to do with the digitizer. The digitizer is just there for input.
It could be that the connector is a bit loose on the mainboard. The way the Photon is designed I wouldn't think it's the ribbon. I could be, but very unlikely. Anyway it's worth looking into the connectors and just to be sure the ribbon as well. But that would take a full dismantle. The connector is just 5 minutes work.
Next time try booting into recovery. If that goes well (and regular boot not) i'm pretty sure it's a hardware problem (GPU).
Die Bruine said:
Flickering screen can't have anything to do with the digitizer. The digitizer is just there for input.
It could be that the connector is a bit loose on the mainboard. The way the Photon is designed I wouldn't think it's the ribbon. I could be, but very unlikely. Anyway it's worth looking into the connectors and just to be sure the ribbon as well. But that would take a full dismantle. The connector is just 5 minutes work.
Next time try booting into recovery. If that goes well (and regular boot not) i'm pretty sure it's a hardware problem (GPU).
Click to expand...
Click to collapse
When boot in any mode Ican't see anything.. A fading circle of grey lines runs vertically down the front. Sometimes after many reboots it fixes itself though. Good to know not digitizer. So take apart and check ribbon and maybe replace LCD likely?
I wonder if it is possible to simply replace the LCD if it's defective or if you have to replace the whole LCD-digitizer-speaker-etc set (which is expensive).
Loader009 said:
I wonder if it is possible to simply replace the LCD if it's defective or if you have to replace the whole LCD-digitizer-speaker-etc set (which is expensive).
Click to expand...
Click to collapse
I ordered a replacement lcd screen so will find out. I also ordered the digitizer and flex cable.
So i'm thinking it may be more hardware involved than screen inolved. When it does work everything is usable and it works fine. This is only about 10% of the time at this point. Otherwise it boots up to show some vertical lines traveling down the middle of the screen but only in a circle in the middle of the screen that fades as it gets close to the edges. I'll try taking apart tomorrow night to see if ribbon and what not looks ok. But so far i've invested about $70 into parts and i'm thinkin about just snagging an S5 for $100. I will miss the keyboard though although I can hope that like the s3 and s4, the s5 will get a keyboard attachment. Thoughts?
If I remember correctly the LCD comes with the ribbon and camera connected. The digitizer is connected via a ribbon to a board in the top of the front panel. You could try to disable the pin. When the phone doesn't seem to work, reboot and try calling yourself. If it rings, there's something wrong with the screen and not the phone.
If there was something seriously wrong with the phone, it wouldn't boot. But that's just me guessing/assuming.
My daughter's Photon has had a digitzer replacement twice. And it looks like it's been used to play football. But that one still rocks. No quirks or any strange behavior for that matter.
What I'm trying to say is that the Photon is a decent piece of hardware. A family of four, we all have a Photon. Three of which have had their digitizer replaced and one an LCD (scratched it when replacing digitizer).
I swapped my Razr HD for an Z2. It was time for a new corporate phone. So that, and the camera, is the reason why I went for a Z2. My options were 930/G3/S5/Z2. S5 is not my cup of tea. The G3 has no ruggedness whatsoever. The 930, apart from WP maybe I should have went for it.
So it came down to the Z2. To be honest I'm looking to trade it when the Z3 compact arrives. We'll see.
@Loader009
Digitizer is a part, board for speaker is a part, the speaker itself is a part (adhesive, watch out, btw 100% the same as Droid4), and the LCD is a part on it's own.
Going to open up my phone tonight after work. I was bored and was just playing with the keyboard sliding it open and closed a bunch and now the screen looks perfectly clear.. although sometimes it will still black out and I have to reboot it a few times to get it back. I feel its more a connection inside like you stated earlier. I love my Photon and really don't want to have to get a non slider phone. New phone's are so friggin huge lol.
The good thing is, the PQ has gotten pretty cheap, so you might want to get a used one at ebay if the part to replace is too expensive.
flickering screen (backlight) is not lcd problem.
for 70% is it problem on mainboard - backlight ic. This problem is caused by using unoriginal charger.
and 30% flex problem
I had my screen become un-responsive etc, it was due to a crack in the ribbon. Swapped it out & all ok.
Easier to swap the whole screen assy than to change the ribbon, but depends on what spares you have/can get.
You'd need to have a good look at the ribbon for any damage.
Sent from my SIM-modded Photon Q
My sister just broke her moto x pure.
The display works, however the digitizer do not works correctly. Cannot post pictures because the wallpaper is containing private information and i cannot change it.
She cannot use the entire screen.
For example on the lockscreen, she cannot use the 8. And the other digits works very badly. So she cannot unlock her phone.
What should I replace (screen, digitizer...) and where should I find the replacement part ?
Thank for your help
You'll need to replace both the digitizer + display as they come together. If you are good at repairing phones, you can get the display from eBay or else send your phone to service center if you don't. I would suggest you to send it to the service center.
You could use a USB OTG cable to connect a mouse and thus regain control of the device in order to clear any sensitive information prior to having someone fix it. I have bought and fixed several Moto X pure edition phones with cracked screens for family members. Most of them did alright, but one phone had the screen replaced, then a cow stepped on it. Although it didn't crack, after a while parts of the screen stopped responding to touch. The screen I replaced it with has not been damaged at all, but parts of it have stopped responding to touch as well. Sometimes I wonder if these phones don't have a particularly weak and easily damaged screen. I sometimes get my replacement screens from GadgetFix. If you fix it yourself make absolutely sure that you get a screen+frame assembly. It's just a few dollars more, and totally worth it. And be careful when you transfer the speaker grill trim to the new screen that you don't press hard enough to crack the screen.
Thanks you, I think I will change the screen and the frame.
https://m.ebay.com/itm/For-Motorola...%3A7550533015e0a9cbd9f98f63fff20079%7Ciid%3A2
Is this what I should buy ?
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
zstricky said:
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
Click to expand...
Click to collapse
Thanks !
Could you point me to a tutorial or a video explaining how to change the screen
I believe that Ifixit has a whole teardown tutorial for this phone. If not just search YouTube for (phone model) screen replacement, watch it a time or two, and then pause it while you do each individual step. If the first video you watch doesn't explain things in an understandable manner just watch another one. It's been a while since I searched for one, but I think there are at least a few good ones.