Related
I recently had a problem with my 1st Touch Pro with image ghosting/ burn in and ive just had it replaced. Now the same problem is happening with the new device. The problem only seams to happen with custom roms being used on the device. If i re-flash my phone back to the default/stock rom i get no screen problems at all.
Any idea why this only happens on custom roms and not the default/stock rom??
edit: ive attached an example of what i mean in image ghosting/burn in. Just in case some people wasn't sure what i meant by it.
More info?
Heya! What was the last ROM you had this problem with? Version info would be extremely helpful as I have heard that specific builds have some graphics bugs.
I've had that same issue as well on 2 different fuze's. Using various builds of EnergyROMs... However, after reflashing to stock and using it awhile, I'd get the ghosting on that too.
Anyone have any ideas?
Ehh my 2nd Fuze is doing this so I'm getting a replacement, and I'll just do the HTC ROM upgrade and keep WM6.1. I'm tired of it, and the landscape view also distorts the start menu icons 90% of the time.
Having flashed back to a stock rom, doing a hard reset... Playing with it for awhile... The ghosting is evident on it as well... I've also had where the bottom section of the screen will flicker quickly...
Anyone else?
I think it's a hardware defect. My first phone did that, and then after a few weeks, I had to get a warranty replacement because the screen eventually went completely black after doing it intermittently).
I've had both ghosting effects & occasional rapid flickering since I first bought the Fuze back in November. It's intermittent but happens most when the device is hot (either from use or simply being in a hot location). So far it always clears up after a while. This happened on the stock rom and every custom rom I've used so far.
I'm fairly certain it's a hardware issue with the Fuze/TP because the ghost will tend to remain there for a while even after a soft reset.
Hopefully my good fortune continues and it doesn't end up breaking permanently some day.
it is definitely a hardware issue.
I just received a "repaired" phone back from HTC today only to turn it on and find the same problem. I had to call again today and complain...and the only thing they could do for me was ask me to send it in again....so pissed.
I literally got 5x FUZE replacements and each had this until this last one I've gotten...!
Vid: http://www.youtube.com/watch?v=fFb4bQomqPw
Thx
JFlitt
JFlitt said:
I literally got 5x FUZE replacements and each had this until this last one I've gotten...!
Vid: http://www.youtube.com/watch?v=fFb4bQomqPw
Thx
JFlitt
Click to expand...
Click to collapse
were they replaced through HTC or ATT?
I am on my third Fuze.
First day when I upgraded to Fuze the screen started doing this. So I took it back to AT&T for replacement. On the drive back home screen on second device started doing exact same thing. Took it back and got yet another replacement. This one works, but I have seen it happen once or twice in the 3 or 4 months I've had it.
AT&T also told me when I got this phone that it was the last exchange I could make for the 90-day exchange. If I had another problem I'd have to send this back to the company. WTF is that all about? You're going to inconvenience me because you keep giving me bad eggs? At least this one works right.
Is anyone with a Touch Pro having the same issues? Or is it all just us AT&T customers?
I have an O2 Xda Touch Pro. The only symptom I have that remotely resembles the ones listed here is the flickering at the bottom. But, in my case at least, the flickering is caused by a particular shade of gray displayed in Opera...and that's the only time it happens. So, again for me, it seems to be a software issue.
Drew
Flickering is another side affect that mine occasionally has... just in the bottom 1/5th or so of the screen... Most easily seen when in landscape mode in messaging.
those are all hardware issues too, its just only being displayed because that certain shade of grey is whats making it visibly noticeable.
Well, we'll see if replacement number 4 has the same issues soon...
They actually offered me a BlackBerry Bold/9000 as a replacement phone like it is even in the same universe.
Hardware differences?
Anyone with a buggy Fuze want to post the part number / sku number etc...? Maybe we are looking at a bad batch or a bad but unannounced hardware version?
I had this too on energyrom, I allways passed it off as a touch flow 3d opengl issue which would draw to the screen.
But thinking about it, it does occour when the device is hot, and the screen flickers also.
But It allways goes away after a soft reset for me.
Vodaphone UK TP
I have this problem too :/
Well, I just got my replacement, and it is doing it as well. I'll post some screen shots of it later on today.
Anyone want to tell me what numbers we want/need?
Hey guys,
I've just receieved my third HTC handset with what I'd consider to be a major issue.
HTC Touch2 in 2009 - would often power off during calls (probably due to WinMo). Hardware buttons quickly became loose after about a month of use, and the backlighting stopped working.
HTC Legend in 2010 - this phone is two months old and the top speaker is so broken I can barely hear somebody on a call. Everything crackles and pops and, according to people on the other end, they can barely hear me either. It's annoying as when I bought it the call quality was great but gradually the speaker got buzzier and buzzier.
HTC 7 Trophy - the most serious of the bunch. Yesterday, whilst web browsing, the phone displayed a still multicoloured screen of static. None of the buttons would work. After taking the battery out and restarting, the static re-appeared. I've managed to power on the phone since - you have to wait an hour with the battery out - but you get the same static lock ups when web browsing or using search after about five minutes. Having had a similar experience on my laptop, it looks to me like a GPU failure.
Am I the only one who has experienced incredibly shoddy hardware quality control from HTC? I'm going to have to replace the HTC Trophy and, at the moment, I'm starting to seriously question going with an HTC. The touch2's button issues were forgiveable because that was relatively cheap, the Legend's speaker was incredibly annoying but the Trophy's GPU failures are completely unforgiveable IMO. They render the phone completely useless.
Am I just unlucky or have others experienced similar concerns?
Cheers
My Hero has been fine, along with my touch... Although that met a washing machine in the end
Finally ~ Someone With A Similar Issue
Finally, someone that doesn't purely worship HTC... Although I haven't experienced issues to the magnitude of your's, I haven't been 100% happy with my phone since the day I bought it. I have a HTC Desire, and I got this phone in confidence after reading many reviews about how good the phone was, these reviews were clearly written from people with 0% experience with the phone.
I will number the issues I have had with the build quality of this phone...
1) The case on the back of the phone, has only ever been took off about 4 times, I have never dropped my phone or anything, however it starting to come off, yes, I can take the back of my phone off, without using the finger slot.
2) The screen is so easy to scratch? It was in a pocket with an Asthma spray, and there was no vigorous shaking of my pocket, yet somehow the screen just completely f****d up man... wow.
3) This is probably the worst issue I have. Every time HTC releases an update for my phone, I run into some sort of issue. I got my phone in May/April 2010 (it's on Orange UK however de-branded and now due to update issues, running a custom ROM) and immidiatley I found that an update had been released. After downloading the update the phone started to install the update, however it restarted and nothing happened. Left it for about an hour, nothing... So yes, I did the worst, took the battery out and messed it up completely. The shop I got it from forced me to send it to HTC, it took them 5 weeks (VERY poor customer service) and when I got it back they had barely fixed it, as when I turned it on, it finished installing the update?
4) I have had some other software issues, such as the system occasionally locking up and having to remove the battery to get anything to work. Occasionally the screen will lock up, like I won't be able to click any icons, however I'll be able to swipe from screen to screen, and it really can be quite annoying. As far as battery goes, it will last me an entire day, but will require a charge at the end of the day.
However, I think me and you are in a minority. I'm 14 years old, and I talked my Dad into buying a HTC Desire HD. He hasn't had a single problem with his, it installs updates perfectly without and issue, and the software performs seaming-less (except for a problem with a process that took up 80.9% of the RAM, fixed by turning the USB Debugging on?) So I believe HTC are good, theres just a few really, really bad apples in there, and unfortunately HTC won't admit this, and don't want to do anything about it... I hope I helped, I'm fairly new on here...
Cheers, Michael.
Well guys,you are a minority indeed.This Tuesday I received my Desire HD,which is my fourth handset from HTC.I have had a Diamond,a Hero,a Desire and now the Desire HD.The only problem I ever had was with my Diamond which,after one year and a half took some water in it without getting exposed to any water,but it was because the climate here is very humid.Other than that I have never had an issue.And I am no fanboy,if I had problems I would change without second thought.
I'll just tell you that a friend of mine punched my Desire HD with his full strength(don't ask why) while it was in my pocket.I thought the phone was done for,scrap,but the phone is like nothing happened.My friend's hand wasn't so lucky however,it still needs ice!
I've read a few threads on the screen Flickering and there doesn't seem to be any resolution .
I'm on my 3rd tablet now (thanks best buy accident damage warranty!) And this one is flickering worse lately than ever. I updated to the latest firmware, yesterday only to boot up to horrible bouts of flickering during the setup screens.
The odd thing is, there seem to be no consistency to it. Some days it's so had I can't even use the thing, other days it doesn't happen at all. I use the tablet every day for notes or PDF viewing. I've used it with no magnetic cover (totally naked) and with the cover.. doesn't seem to change the occurrences.
I've turned overlays on/off force gpu render on/off.. nothing seems to fix it. Sometimes changing the overlay will reduce the flickering other times it doesn't affect it at all.
I hate to say it, but if I can't resolve it, I'm going to be forced to move to the surface 3.
I'm an electrical engineer and I've done as much trouble shooting as I can think to do.. but I've come up empty handed.
Anyone else have these problems? Has anyone found a definitive fix?
I sent mine back 3 times. The first was a reset. Thanks for wasting my time. The second was a motherboard and that didn’t do it. The third time they did a motherboard, digitizer, and usb port. It's finally stable and back to normal. After 5 trips back, the BB warranty triggers a new unit. Check if it triggers a refund.
I get it occasionally, so far I'm able to resolve it by booting into custom recovery (TWRP) and clearing dalvic to allow all apps to rebuild. Sometimes this resolves it for a few days, sometimes a couple of weeks. Its a repeatable "fix" that makes me question if the issue is related to memory or trim or something like that. Kind of reminds me of how with the first generation nexus 7s one would see slow downs after a while and filing storage with fake data then deleting it would improve performance for a while.
I'm definitely not a tender user of the device. I go back and forth between multiple ROM's and kernels on a daily basis testing what is testable, and unfortunately also what is not. Anyway, even though mine was bought as refurbished on eBay, I have never had any issues like the ones you describe. More specifically, I have never had any issues what-so-ever, that was not created due to my own ignorance. To me the device seems indestructible.
Besides, I would hate to be in the place of my device, or I would definitely have turned schizophrenic. Should I feel bad about pushing it through all this?
Because we're trying to figure out if it's related to a specific device type, which one do you have? P900, 905, 907A or another?
ShadowLea said:
Because we're trying to figure out if it's related to a specific device type, which one do you have? P900, 905, 907A or another?
Click to expand...
Click to collapse
P900 wifi. Us version bought at best buy.
Today the tablet has been rock solid, I have literally done nothing between when it was flickering like mad and now.
I wonder if it might be related to some kid of data transfer. either over wifi, or when data is written or read from storage or SD card. I've take then SD card out to eliminate that as the problem.
Mine was P900 from BB
Issue lies with the screen.
This happened with me I sent it back to Samsung, 3 times. They seem to have finally got it right. They replaced the battery and then the display screen. Now it appears to be working I will let you know after a month if it is still good. They also told me that they will not replace the device even though I bought it and the issue was right from the start. Not even 6 months old. When working the device is excellent.
Ah, so now we know for sure the battery is replaceable. That's good news. Maybe someday our batteries will no longer hold a charge and we can replace it. Now for a good video on tear down and what tools to use to do that and where to get a replacement battery. I know it's early for most of us but someday......we will have to replace that battery. I'm one of those that keep my toys (computers/laptops/tablets/phones,) for many years.
Mine is running like new since last service. Getting the BB Geek Squad warranty has paid for itself already. I get 2 years on anything over $500.
Mine is a p900. I purchased from samsung website. Mine has been doing it fresh out of box. So bummed.
Ive had my 12.2 since march and it recently started flickering. It seems to tuen of the screen for a millisecond especially when lots of refreshes happen. Like scrolling a pdf. A few days back it was bad. Now it has gotten better and I havent noticed anything.
{Diemex} said:
Ive had my 12.2 since march and it recently started flickering. It seems to tuen of the screen for a millisecond especially when lots of refreshes happen. Like scrolling a pdf. A few days back it was bad. Now it has gotten better and I havent noticed anything.
Click to expand...
Click to collapse
My P900 has just begun flickering exactly as you describe. So I should just be patient and hope it goes away by itself?
I'm flickering again. Turning the screen brighter is what triggers it for me. Returning to stock just to get it back and have it flicker again to hit the magic 5 returns may be what I have to do.
https://youtu.be/CvxbVft69Kg
I just followed this guide. Its been a week now, not had any flickering since I did it.
Manya3084 said:
I just followed this guide. Its been a week now, not had any flickering since I did it.
Click to expand...
Click to collapse
Lifting the motherboard only temporary close the gaps of cracked battery connector. The permanent fix need to do: re solder the battery connector.
Look closely under magnified glass or microscope , you'll see the cracked solders. You can test by pushing the connector slightly, a bad one will move easily or lift off from its solder joints.
This video was removed from the poster after I pointed out his guessing solution. Flickering screen has nothing to do with LCD connector on the motherboard.
Lifting mother board actually you're applying pressure on the battery connector from rear cover.
I have had my P900 sent to Samsung service twice without having the screen flicker fixed. I thought this was a known problem and that Samsung themselves should be aware of it? Maybe I should supply some XDA links next time...
Skickat från min SM-P900 via Tapatalk
bluebirch said:
I have had my P900 sent to Samsung service twice without having the screen flicker fixed. I thought this was a known problem and that Samsung themselves should be aware of it? Maybe I should supply some XDA links next time...
Skickat från min SM-P900 via Tapatalk
Click to expand...
Click to collapse
Depend on where you send for service, they know how to fix it now. Service Centers actually are contractors provide services for Samsung and others, the fact that most people don't know.
http://forum.xda-developers.com/showpost.php?p=59573206&postcount=100
It Works. Battery connector replaced. Smoooooth
After 2 visits to Samsung , my unit finally works fine.
Motherboard and LCD were changed first time. But issue persisted.
Second time, battery connector was replaced. Since then it has worked very very smoothly.
Beut said:
Depend on where you send for service, they know how to fix it now. Service Centers actually are contractors provide services for Samsung and others, the fact that most people don't know.
http://forum.xda-developers.com/showpost.php?p=59573206&postcount=100
It Works. Battery connector replaced. Smoooooth
After 2 visits to Samsung , my unit finally works fine.
Motherboard and LCD were changed first time. But issue persisted.
Second time, battery connector was replaced. Since then it has worked very very smoothly.
Click to expand...
Click to collapse
Thanks, missed that other thread. Next time, I'll send them an en explicit request to replace the battery comnector, and refer to those two threads.
Stefan
Tapatalked on some kind of Samsung tablet
A few people here and there have been starting to have this problem pop up- including me.
My phone was perfectly fine with absolutely no problems with the touch screen but about three days ago, my phone started acting weird.
At that time, I was running CM 5.1 nightly and then dirty flashed over to the latest. I thought that this was the problem and so I did a clean flash but still the problem was there.
Went back to the original CM nightly that I was previously on and problem is still there.
Tried many different ROMs but the problem is still there..
I can't type out a sentence without my phone failing to register a touch and sometimes registering rapid touches as one - the same problems before Synaptic released a 'fix' for this issue.
At this point, I don't really know what to do but it's aggravating that a phone can't do it's basic tasks such as type.
The phone seems really sluggish when I type - which I haven't encountered before this which slightly leads me to believe that input lag is the crux of the problem however, I can't say for certain.
Can anyone with more expertise help me with this?
Same issue
You_got_owned123 said:
A few people here and there have been starting to have this problem pop up- including me.
My phone was perfectly fine with absolutely no problems with the touch screen but about three days ago, my phone started acting weird.
At that time, I was running CM 5.1 nightly and then dirty flashed over to the latest. I thought that this was the problem and so I did a clean flash but still the problem was there.
Went back to the original CM nightly that I was previously on and problem is still there.
Tried many different ROMs but the problem is still there..
I can't type out a sentence without my phone failing to register a touch and sometimes registering rapid touches as one - the same problems before Synaptic released a 'fix' for this issue.
At this point, I don't really know what to do but it's aggravating that a phone can't do it's basic tasks such as type.
The phone seems really sluggish when I type - which I haven't encountered before this which slightly leads me to believe that input lag is the crux of the problem however, I can't say for certain.
Can anyone with more expertise help me with this?
Click to expand...
Click to collapse
Im having a similar problem. I cant type a single sentence without errors. It doesnt register the touch as well few times. Using a device is so sluggish.. hate it. Tried many roms with clean wipe but without any success. Would be nice if anyone could help with the above issues.
I have similar issues and I don't think it's a software issue - I have never flashed a ROM. I think it's hardware problem, probable the earthing suggested in this post:
http://forum.xda-developers.com/oneplus-one/general/fixing-ghost-touch-grounding-issue-hint-t2951000
There is an app that re-calibrates the touchscreen every time you turn it on, but it doesn't completely solve the problem for me and also prevents unlocking until it has completed, which is annoying. The fact that a re-calibration is needed to even achieve a little stability is consistent with an earthing problem.
If mine gets any worse, and I think it will, I'm going to investigate a warranty claim, but that sounds like a few weeks with no phone, which I can't tolerate.
hi, i'm experiencing the same problems. you can test this when registering 2 touches on the same Y axis (try with anyone of touch test apps).
I think that this is popping out to a lot of people in this moment because of the hot days kicking in. in fact, if your phone is cold (try to put in a fridge for 5 minutes) it will work perfectly, but when it will become hot again in your hands the touch will start to freak out again
What sucks is my phone was perfectly fine a few days ago and we've only had an increase of about 5 deg F over the week.
Occasionally the capacitive buttons don't register either.
Same thing here. Perfectly working screen, flashed 5.1 unofficial some weeks ago and no matter wich versión of cm or what kernel, randomly ghost touches happens.
Now with official 5.1 and ak 200 works better, but it's still there. There must be some kind of firmware/software problem, It's too curious that this issue begin to happend to many people at the same time.
My bro has the same problem, some days after flasing CM12S the screen doesn't feel as responsive anymore.
The screen isn't able to handle multiple touches anymore what makes typing really annoying, scrolling through settings also goes really slow.
Tried flashing latest 12.1 nightly but I don't think any ROM will be able to fix it.
No idea what caused it and if there is a way to fix it.
ZuLa said:
Same thing here. Perfectly working screen, flashed 5.1 unofficial some weeks ago and no matter wich versión of cm or what kernel, randomly ghost touches happens.
Now with official 5.1 and ak 200 works better, but it's still there. There must be some kind of firmware/software problem, It's too curious that this issue begin to happend to many people at the same time.
Click to expand...
Click to collapse
This is exactly what happened to me and it seems like it happened to a good number of people around the same time. Either 1)It's a huge coincidence 2)OnePlus rigged our phones to go haywire around this time or 3)Something in one of the nightlys got messed up for a few people however like you said, flashing new roms for kernels doesn't help anymore which makes me want to do a complete wipe - Internal data included.
Same issue
I was sure it's the heat some time back but then this touchscreen fixer app in the Themes and Apps section is actually helping. That makes me wonder if its the firmware, coz the problem only kicked off after the CM12.1 update. A few of my classmates purchased the OPO at the same time as I did and they dont have this issue (they didnt go to CM12.1).
Any tips on what firmware/ROM to revert to?
Edit: I also flashed the Oxygen OS firmware.
It's not a change in the firmware, mine did it spontaneously. It's hardware. OnePlus will do everything they can to spin a software story and indeed it will often be possible to partially mitigate in software, but ultimately everyone with this problem should be getting a replacement. That could be a lot of people.
patp said:
It's not a change in the firmware, mine did it spontaneously. It's hardware. OnePlus will do everything they can to spin a software story and indeed it will often be possible to partially mitigate in software, but ultimately everyone with this problem should be getting a replacement. That could be a lot of people.
Click to expand...
Click to collapse
I'd love to see how you jumped to such a definite conclusion. I live in a warm climate to begin with, temperatures are actually lower now than they were a month and a half ago, and the CPU of my OPO has definitely risen above the 41-45 Celcius range that people seem to quote for this current wave of issues (and I have corroborated with my own testing). However, if I go to the recovery, the touchscreen seems to have normal responsiveness, regardless of the CPU temperature. Unless it was a built in hardware malfunction set for a specific moment, the probability of a sample, even of this size, where a series of individuals can all see the exact same lineup of hardware-based issues occurring at the same time, is too ugly for me to try and imagine calculating. But I would fare to bet it isn't high.
However, if a set of users are all changing their software as new versions and builds come out, just as the release occurs... At least then you have a series of events occurring all at the same time. Not causation, but at least there's a stronger correlation than "it's warming up so now we see the hardware defects".
The temperature range this "defect" is being attributed to can be reached quite easily in normal use in temperate areas, but even in colder climates, it should be simple to reach such temperatures if the phone isn't underclocked, as the phone is set to charge, or even if the phone is running a software update of some kind, and countless other things.
TL;DR - Don't jump to conclusions that fast, weather changes aren't a strong correlation.
hyshion said:
I'd love to see how you jumped to such a definite conclusion. I live in a warm climate to begin with, temperatures are actually lower now than they were a month and a half ago, and the CPU of my OPO has definitely risen above the 41-45 Celcius range that people seem to quote for this current wave of issues (and I have corroborated with my own testing). However, if I go to the recovery, the touchscreen seems to have normal responsiveness, regardless of the CPU temperature. Unless it was a built in hardware malfunction set for a specific moment, the probability of a sample, even of this size, where a series of individuals can all see the exact same lineup of hardware-based issues occurring at the same time, is too ugly for me to try and imagine calculating. But I would fare to bet it isn't high.
However, if a set of users are all changing their software as new versions and builds come out, just as the release occurs... At least then you have a series of events occurring all at the same time. Not causation, but at least there's a stronger correlation than "it's warming up so now we see the hardware defects".
The temperature range this "defect" is being attributed to can be reached quite easily in normal use in temperate areas, but even in colder climates, it should be simple to reach such temperatures if the phone isn't underclocked, as the phone is set to charge, or even if the phone is running a software update of some kind, and countless other things.
Click to expand...
Click to collapse
The outside temperature being warm would keep the screen hot for a prolonged period of time as compared to the phone heating while charging or intense usage. However, your recovery argument is spot on! The touch works flawlessly in recovery!
goldengargoyle said:
The outside temperature being warm would keep the screen hot for a prolonged period of time as compared to the phone heating while charging or intense usage. However, your recovery argument is spot on! The touch works flawlessly in recovery!
Click to expand...
Click to collapse
Well I guess it's good that it's not hardware damage.
Has anyone tried going back to android 4.x to see if it helps- if it really is software?
Surprised there hasn't been more people experiencing this issue given the number of people going to android 5.x
I have the same frustrating issue
Same here, works fine in recovery. Also had this issue arise after the first bout of touch issues: https://www.youtube.com/watch?v=yoFYcFawTI4&feature=youtu.be
(clearing cache seems to alleviate that particular problem)
I think it's a software issue. I mean possibly there is hardware problems too but mine started appearing only after I installed the 5.1 update... also some things for me feel like a software issue for example when scrolling instagram back up to the top. as soon as it gets to the top it bounces back down again.. seems like software problem to me.
This is definitely a hardware issue. My phone was working perfectly. Until I went on a 5 days trip and used it for navigation, and went very hot. Up until then I was on the same CM12 rom for weeks without a problem. Since then, I've flashed many roms and the problem persists. It's definitely a hardware problem. For me it occurs whenever the phone runs a little bit hot. Practically all the time when I'm on 3G. When the phone has been in my pocket with 3G on, it's almost impossible to unlock it when I try to use it.
I contacted Oneplus a week ago and I still try to get them to RMA the phone. They've sent me all sorts of crap emails, I wiped the phone and now they ask me to shoot a video to showcase the problem. This company has the worst customer service you can find. As much as I like the pricing, I won't be bothered again with their devices. I only hope they'll RMA it otherwise I'll open it myself and try to fix the grounding issue. There is a detailed how to which also explains what's the problem.
I always had it but it was so minim that maybe couple of times a day weren't that big problem!
Just yesterday and today the issue is now intolerable! I removed the screen protector and used the stock lollipop keyboard (bcz swiftkey is kinda slower the issue was there more).
It's still very annoying and I can't type easily! I had to remove flow/swype feature to minimize it further!
Seriously considering buying another phone although I wanted to keep it for a year at least! But the hate is growing on me...
HAha exact same problem here happening since 3days.
I was on Euphoria 29/3 build. I flashed ak kernel, after reboot i couldn't type properly anymore. I was like damn, maybe its bad kernel setting or so. Didn't help.
Cleanflashed 3 roms since then, didn't solve anything. All tho touch works fine in twrp for me. So im really clueless. Swiping does seem to work better for some unknown reason to me!
The ghost swipes while typing is driving me crazy. Thinking of going back to 5.0.2 to see if that helps. Do I need to flash an old firmware to go back to a previous Android version
Well I have been a owner of a LG Nexus 5 for the past (almost) 2 years now, in fact I am coming to the end of my contract very soon and will be able to either goto another company or get a new phone.
Anyways, sometime ago I experienced a problem with my microphone and external speakers not working, or at at least some of the time... After a bit of research online I found out my problem was related to a connection inside the phone that connected the bottom assembly to the main board at the top of the phone. It required me to remove the back panel and a few screws to remove the plastic cover, but the poster suggested putting some tape on top of that connection to hold it down more firmly to the socket it connected too. So I did this. I put some black tap (electrical tape cut to fit.) on top and then assembled the phone again. Viola, It worked!
Well, a short time after I decided that I wanted to update my phone from stock kitkat (4.4.4). Always been curious about custom ROMs and gave Cyanogenmod a try. Not only that I got bold and tried the nightly releases of the new marshmellow update. After some time I started experiencing things not working, like the camera, and a lot of freezing, hang ups and random reboots (not so much the reboots as the constant freezing). Often I couldn't get anything on the screen or the phone to respond from a locked state and when I did, often the phone would lag so much, that doing anything would take a long time and proved to be impossible.
I started thinking it was the nightly releases as the source of my problem and just kind of shrugged it off and figured "they will eventually fix the problem". I kept this thinking for quite some time. But it occurred too me one day that something else was causing the issue I was facing for the simple fact that the lag started showing up in the recovery mode (also custom) and a lot of times would continue to show up after I rebooted my phone. Hence, would rule out any 'software' issues I was facing.
I began to think that my problem was hardware. Maybe it was just time for a new phone. But still months away from the end of my contract, this meant I would have to pay off the 'problematic' phone first before getting a new one. I really didn't like that idea. So while looking into this problem, in a last ditch effort, I opened my phone again. Dunno why but I also decided to get rid of the tap on the connection I tried to fix before... I popped off the connection there and had a look at it. It didn't seem damaged in any way nor did the socket. Strange as it was I put that connect back in the socket and put the cover plate back on making sure not to torque the screws and assembled everything back up....
Now the mic and ext speakers work just fine and the phone is working like I just opened the box and took it out for the first time. And I have not once seen any problems... I understand what's happening here... still just wanted to share that for it was definitely weird or what?
https://drive.google.com/open?id=0B0pUNVcVRCJ7MThMc0NHLUNkSEU
Sorry about the link, only way I can upload an image.
Just so there is no confusion... an image of the effected area, inside the phone. The arrow points to the connector and more importantly the area of the connector that seems damaged. If I press lightly where the arrow is pointing on this image, the assemable at the bottom (speaker/mic) will work, indicating a loose connection. Although after visual inspection, I cannot see any damage to connector or the socket. I suppose the only way to really "fix" the issue is to order a new part. As stated previously, already tried tape on the socket to help hold it down, but that seem to cause just as many issues with the phone performance. Any other suggestions?
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Does anyone else have issues with there ext. speaker and mic not working?
An update on the phone;
back to square one. My ext speaker and mic will not work. And that socket has something to do with the LCD connection on the screen as it will black out if just the right area on the back of the phone is pressed. Only way to revive the phone is to long-press the power button for a reboot. Then will come up fine but speaker and mic still do not work.
audit13 said:
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Click to expand...
Click to collapse
Wow, that sounds pretty low level tactics of LG... just shameful really, but not hard to believe these days...
Quite honestly, I am just going to replace the phone. Think I got a pretty good run out of it and think its pretty well time for an upgrade. Anyway, for the reason I got the phone, it wont matter the speaker and mic don't work. Just going to use it for development and it will be a good test device.
Oh an this post is related to this thread so I thought I would link it for it may help someone else facing similar problems....
https://forum.cyanogenmod.org/topic/125227-nightly-cm13-releases-make-my-nexus-5-very-slow/
I'm not sure that LG had anything to do with the low-quality replacement parts.
If I were you, look for a n5 with a smashed screen that is suitable for parts.
audit13 said:
I'm not sure that LG had anything to do with the low-quality replacement parts.
If I were you, look for a n5 with a smashed screen that is suitable for parts.
Click to expand...
Click to collapse
Good idea, except the iphone is the most popular phone around here ... find it pretty hard to find one, been looking. But thanks.
I have seen quite a few busted n5 phones in Toronto. I have managed to get working phones with a smashed screen for as little as $30 which is rare for Toronto. Average I pay is $40 to $50. For this price, I either use the phone for parts in several phones or I get third part screen from Aliexpress for around $40 CAD.
I just want to update this as well...
I am fairly certain (now thinking about causes) its not really a design flaw, but more so because I frequently sat on my phone when it was in my back pocket...
audit13 said:
When ordering a replacement part, you need to be careful because there was another XDA member replaced the same part with a cheap 3rd party solution and the phone would not charge until he replaced it with an oem part.
http://forum.xda-developers.com/google-nexus-5/help/to-buy-usb-charging-port-flex-cable-t3314357
Click to expand...
Click to collapse
It was not me but I had that same experience. Replaced with a cheap oem and it didn't charge after that.
I found out why. The charger usb socket was not connected to anything ! Unbelievable! It lacked the black plastic backing for that part of the cable to connect to.