Database Info

[Completed] [Q] My phone not rebooting after cwm installation please help

After installation cwm in my karbonn titanium octane plus i tried hard to reboot it please help me to rooboot it. Even i cant open the recovery mode after this.when i try to reflash the cwm it gives error DRAM failed

Hi,
I hope you flashed a CWM made for your exact device make and model number.... Flashing anything not made for your exact device make and model number can lead to serious trouble sometimes.
Here is a root thread for your device which mentions CWM, you can try asking for help from here,
http://forum.xda-developers.com/general/help/root-karbonn-titanium-octane-plus-t2816066
Otherwise you need to ask for help in the same section we showed you in your last Assist thread.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

[Completed] LG L34c Boot Error - Secure booting error!

The message appears at the top of the screen above the LG logo after it has been there for a few seconds and it says:
ERROR : boot certification verify
[1240]------------------------------------------
[1240]
[1240] Secure booting Error!
[1240] Cause : boot certification verify
[1240]
[1240]------------------------------------------
I've tried Googling the error but every result is about a rooted phone and different models. It should also be noted that this started happening after a routine shutdown and restart command. The only apps I have installed that didn't come with the phone are Perk TV[1] .
The phone is otherwise a stock LG L34c from Tracphone.
I've seen a lot of posts from other users who encounter this issue after trying to root their phones or change software. Is there any chance of reloading firmware/OS/etc to surmount this issue?
Thank you for your time!

Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA for full access:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] (MT6577) STATUS 0 installation aborted

I have colors XT711 tablet with the chip MT6577 n m stuck on bootloop, i tried flashing my stock backup but it shows brom error, tried flashing stock rom shows brom error, n my nandroid shows no files in cwm, idk how can i fix this my cwm shows E:cant mount /cache/recover .. anyone there could u plz help me, i would be appreciate all ur helps.

juan.ap13 said:
Did you tested your SD card on PC?, It's sound like a SD card error or connector malfunction. I already passed about this (Galaxy Y), and , in my case the problem was solved when I open my device and clean physically... give a try..
Click to expand...
Click to collapse
Yes sir done all but m still having problem n I cant install any rom its show (status 0) installations aborted I have attached a file would u plz see n help me. Tq

Hi there,
I'm sorry but I can't find anything related to your question/device.
You must start asking that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] brom error (2005), device powers up too early

Hi, I've brought my dead gionee back to life but i got some problems with IMEI's and SIM cards, and Finally decided to flash a different ROM with higher micromax version. (From micromax 25 to 52)
Now, my phone does not work and the new operation system is unable to load after powring on the phone which shows a black screen, with LED backlight on the keyboard.
I would have flashed the phone to recover it back but the sp flash tool gives brom error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) [BROM] Can not pass bootrom start command! Possibly target power up too early"
I did a long research on google but couldn't find a working solution. So, I hope you give me link to an equivalent flashing tool or maybe you can help me solve the brom issue.
Device: gionee pioneer p1
Thank you.

FinnTheHuman. said:
Hi, I've brought my dead gionee back to life but i got some problems with IMEI's and SIM cards, and Finally decided to flash a different ROM with higher micromax version in vain. (From micromax 25 to 52)
Now, my phone does not work and the new operation system is unable to load after powring on the phone which shows a black screen, with LED backlight on the keyboard.
I would have flashed the phone to recover it back but the sp flash tool gives brom error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005) [BROM] Can not pass bootrom start command! Possibly target power up too early"
I did a long research on google but couldn't find a working solution. So, I hope you give me link to an equivalent flashing tool or maybe you can help me solve the brom issue.
Device: gionee pioneer p1
Thank you.
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Sounds like your EFS got borked a while back. No flashing of ROMs will fix that unfortunately...I would try to get it back as much to stock as possible for warranty/service work.
Since I only see rooting threads about your device, you can ask for advice here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!

OfficerJimLahey said:
Hello, and thank you for using XDA Assist!
Sounds like your EFS got borked a while back. No flashing of ROMs will fix that unfortunately...I would try to get it back as much to stock as possible for warranty/service work.
Since I only see rooting threads about your device, you can ask for advice here:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!
Click to expand...
Click to collapse
I didn't back up the EFS stuff at first place, that's why I think it's a permanant issue. In fact, I would have done a full backup after I had rooted the device but, unfortunately, it seemed that NANDroid, CMW and such custom recoveries were not compatible with it.
Thanks anyway. you did a good job

[Completed] Unable to flash micromax canvas 2.2 A114

I was trying to flash my canvas 2.2 a114 and accidentally flashed a wrong scatter file.
Now my phone is getting detected in sptools, but it doesnt get on, no charging led, no recovery mode, no sign of working.
It gets format successfully but download is always interupted by some error, either NO_PARTITION / PMT ERROR / NO_SPACE(5069)
I have searched almost all the threads on google and xda forum, but still unable to get out of it.
Guide me through this as soon as possible.

abhishek.12415 said:
I was trying to flash my canvas 2.2 a114 and accidentally flashed a wrong scatter file.
Now my phone is getting detected in sptools, but it doesnt get on, no charging led, no recovery mode, no sign of working.
It gets format successfully but download is always interupted by some error, either NO_PARTITION / PMT ERROR / NO_SPACE(5069)
I have searched almost all the threads on google and xda forum, but still unable to get out of it.
Guide me through this as soon as possible.
Click to expand...
Click to collapse
Hi abhishek.12415
Thank you for using XDA Assist
As we do not have an specific forum dedicated to your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.