I have colors XT711 tablet with the chip MT6577 n m stuck on bootloop, i tried flashing my stock backup but it shows brom error, tried flashing stock rom shows brom error, n my nandroid shows no files in cwm, idk how can i fix this my cwm shows E:cant mount /cache/recover .. anyone there could u plz help me, i would be appreciate all ur helps.
juan.ap13 said:
Did you tested your SD card on PC?, It's sound like a SD card error or connector malfunction. I already passed about this (Galaxy Y), and , in my case the problem was solved when I open my device and clean physically... give a try..
Click to expand...
Click to collapse
Yes sir done all but m still having problem n I cant install any rom its show (status 0) installations aborted I have attached a file would u plz see n help me. Tq
Hi there,
I'm sorry but I can't find anything related to your question/device.
You must start asking that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
After installation cwm in my karbonn titanium octane plus i tried hard to reboot it please help me to rooboot it. Even i cant open the recovery mode after this.when i try to reflash the cwm it gives error DRAM failed
Hi,
I hope you flashed a CWM made for your exact device make and model number.... Flashing anything not made for your exact device make and model number can lead to serious trouble sometimes.
Here is a root thread for your device which mentions CWM, you can try asking for help from here,
http://forum.xda-developers.com/general/help/root-karbonn-titanium-octane-plus-t2816066
Otherwise you need to ask for help in the same section we showed you in your last Assist thread.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA for your device. You will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
ok thx
Bricked PAP5300DUO
tHE PHONE IS VIBRATING. i CAN ENTER IN RECOVERY MODE.. The PC make a sound but the fastboot,Odin & other programs cant see my phone. i INSTALLED ALL KIND OF DRIVERS BUT .... i USED PIMP MY ROM BUT I MADE A MISTAKE TO USE OTHER SIMILAR APP AFTER THAT AND AFTER REBOOT DIED. I WIPE THE CHECHE & TRIED FACTORY RESET BUT AT THE END FAILS AND SAYS ...DATA/APP IS MISSING. i TRIED RESTORE TITANIUM BACKUP FILE BUT DOESNT HELPED. PLEASE HELP !!!
I USED THE SUGGESTED METHOD BUT IT SAYS <WAITING FOR DEVICE>
THE LAST I MADE BACKUP/RECOVERY WITH MY OLD BACKUP BUT STILL NOTHING. I KNOW NOW I MUST DO SOMETHING FROM PC BUT DRIVERS ARE PROBLEM.
PLEASE try to help me. Im new to all this ****.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I tried flashing my device several times......but it just showing error i.e,bootloader exceeds partition boundary in this device.When i tried to format all flash its showing brom error nand unknown error...(too many bad blocks).its not turning on,not charging,just detected by my pc.............please help me to sought it out.............
XDA Visitor said:
I tried flashing my device several times......but it just showing error i.e,bootloader exceeds partition boundary in this device.When i tried to format all flash its showing brom error nand unknown error...(too many bad blocks).its not turning on,not charging,just detected by my pc.............please help me to sought it out.............
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like you need to get back to stock. This resource should help:
> Android Development and Hacking > Android General > Karbonn A1+ and all other official download links.
Any questions, can be asked there or here:
> General discussion > Upgrading, Modifying and Unlocking > Karbonn A1+ All about rooting,expanding ram and much more!
Please note, you will need to have an XDA account before posting in any of those areas.
Hope this helps, and good luck!
I was trying to flash my canvas 2.2 a114 and accidentally flashed a wrong scatter file.
Now my phone is getting detected in sptools, but it doesnt get on, no charging led, no recovery mode, no sign of working.
It gets format successfully but download is always interupted by some error, either NO_PARTITION / PMT ERROR / NO_SPACE(5069)
I have searched almost all the threads on google and xda forum, but still unable to get out of it.
Guide me through this as soon as possible.
abhishek.12415 said:
I was trying to flash my canvas 2.2 a114 and accidentally flashed a wrong scatter file.
Now my phone is getting detected in sptools, but it doesnt get on, no charging led, no recovery mode, no sign of working.
It gets format successfully but download is always interupted by some error, either NO_PARTITION / PMT ERROR / NO_SPACE(5069)
I have searched almost all the threads on google and xda forum, but still unable to get out of it.
Guide me through this as soon as possible.
Click to expand...
Click to collapse
Hi abhishek.12415
Thank you for using XDA Assist
As we do not have an specific forum dedicated to your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.